Vance & Hines 230 Installation guide

230
Brand
Vance & Hines
Model
230
Type
Installation guide
Vance & Hines
FP3 Installation Guide
Download the FuelPak FP3 App
1
Vance & Hines
FP3 Installation Guide
2
Locate the Connector on your Motorcycle
Softail > Under the Seat
Sportster > Under Left
Hand Side Cover
Dyna > Under Left Hand
Side Cover
Touring > Under Left
Hand Side Cover
Vance & Hines
FP3 Installation Guide
3
Identify the 6-PIN HD-LAN Connector
and plug in your Fuelpak device
Connector
from Bike
Connector
from FP3 Unit
Vance & Hines
FP3 Installation Guide
Turn the ignition to the ‘On’ Position
(DO NOT START ENGINE)
4
After a few seconds, the LED lights
will begin flashing
Vance & Hines
FP3 Installation Guide
Select Settings Icon
5
Vance & Hines
FP3 Installation Guide
Select Bluetooth under Settings Menu
6
Vance & Hines
FP3 Installation Guide
Turn on Bluetooth and connect
7
Ensure the Bluetooth toggle switch is in the
“on” position. Then select the device label “VIN”
ending with the last 6 digits of your motorcycle’s
VIN number. “Connected” will appear on the right
side once the device has successfully paired with
the Fuelpak FP3.
Vance & Hines
FP3 Installation Guide
Start the Fuelpak FP3 App
8
Open the Fuelpak FP3 Application.
Vance & Hines
FP3 Installation Guide
9
Confirm Connectivity
Ensure Bluetooth is connected and your device
has an active internet connection.
Vance & Hines
FP3 Installation Guide
10
Map Lookup
Now begin the Map Lookup process to search
for the Fuelpak FP3 map for your motorcycle.
The first time you flash a map to your ECU,
the Fuelpak FP3 will be permanently married
to that “VIN” number.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Vance & Hines 230 Installation guide

230
Brand
Vance & Hines
Model
230
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents