2. Kogan
  3. OVOLBRLACWA
OVOLBRLACWA

Kogan OVOLBRLACWA User guide

  • Hello! I've reviewed the user guide for the Olivia Laundry Cabinet OVOLBRLACWA, and I'm ready to assist you with any questions about its assembly, parts, or features. This guide includes step-by-step instructions for assembling the cabinet and provides a list of all components.
  • How many cam bolts are included?
    How many stepped hinges are included?
    What should I do if any parts are missing?
OLIVIA LAUNDRY CABINET
OVOLBRLACWA
Lay all components out on a clean floor and ensure all parts are included. If any pieces are
missing, check all packaging thoroughly, then contact help.Kogan.com for assistance.
1 Top Panel
2 Right Panel
3 Rear Panel
4 Left Panel
5 Front Panel
6 Bottom Panel
A Cam Bolt (x12)
B Cam Connector (x12)
C Stepped Hinge (x2)
D Screw (x16)
E Right Support Hinge
F Left Support Hinge
COMPONENTS
Step 1:
• Insert 6 cam bolts (A) into the Right Panel (2) in the locations shown below.
• Insert 3 Cam Connectors (B) into the Rear Panel (3) in all the holes adjacent to the
corresponding Cam Bolts (A).
Note: Ensure the arrow on the Cam Connectors (B) are facing the direction of the hole.
• Secure parts (2) & (3) together by screwing the Cam Connectors (B) clockwise.
A Cam Bolt (x6)
B Cam Connector (x3)
ASSEMBLY
Step 2:
• Insert 3 Cam Connectors (B) into the Front Panel (5).
Note: Ensure the arrow on the Cam Connectors (B) are facing the direction of the hole.
• Secure parts (2) & (5) together by screwing the three Cam Connectors (B) clockwise, in
the location shown below.
B Cam Connector (x3)
Step 3:
Slide the Bottom Panel (6) into the groove in the cabinet assembly.
Step 4:
• Insert 6 cam bolts (A) into the Left Panel (4) in the locations shown below.
• Insert 6 Cam Connectors (B) into parts (3) & (5) in all the holes adjacent to the
corresponding Cam Bolts (A).
Note: Ensure the arrow on the Cam Connectors (B) are facing the direction of the hole.
• Secure the Left Panel (4) to the cabinet assembly by screwing the Cam Connectors (B)
clockwise.
A Cam Bolt (x6)
B Cam Connector (x6)
Step 5:
• Attach the two Stepped Hinges (C) to the Top Panel (1) in the locations shown using
the supplied Screws (D).
• Attach both Support Hinges (E & F) to the Top Panel (1) in the location shown using the
supplied Screws (D).
C Stepped Hinge (x2)
D Screw (x8)
F L. Hinge Support
Step 6:
Secure the Top Panel (1) to the cabinet assembly using the Stepped Hinges (C), Support
Hinges (E & F) and the supplied Screws (D).
D Screw (x8)
NOTES
Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com
/