2. frisco
  3. 370357
370357

frisco 370357 User manual

  • Hello! I've reviewed the user manual for the Deluxe Plastic Outdoor Dog House model 370357. This manual provides step-by-step assembly instructions, warnings, and a list of components. It also highlights that the product is for temporary outdoor shelter for pets, and has predrilled holes. I'm ready to answer any questions you have about this dog house based on the information in the document.
  • Is this dog house suitable for humans?
    What should I do if the dog house is damaged?
    What type of location is best for this dog house?
OVERVIEW
WARNINGS & CAUTIONS
216mm216mm
280mm
Questions? Call our customer service 1-800-672-4399
PLEASE READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS TO AVOID PET INJURY OR PROPERTY DAMAGES.
· This product is not for human use. Please, never allow children to play in or on the house. For dog use only.
· Follow the instructions carefully and make sure you’ve completed each step.
· Keep away from heat sources and open flames.
· Do not sit on, climb on or shake the product!
· This plastic product is suitable for providing temporary shelter for your pets in an outdoor environment.
· Choose a location that is leveled and dry, as well as being as sheltered from the weather as possible.
· Check your dog house often for loose screws or parts that might need re-tightening.
· If your dog house gets torn or damaged, please discard it.
· The product photo may vary slightly from your fully assembled dog house as this product is continually being enhanced.
Questions? Call our customer service 1-800-672-4399
Questions? Call our customer service 1-800-672-4399
ASSEMBLY INSTRUCTIONS
Tip: This item has predrilled holes to make set up easier for your dog's home.
STEP 2 STEP 3
SKU# 370357
OVERALL DIMENSIONS
M: 38.5 in L x 33 in W X 32 in H
98 cm L x 84 cm W x 81 cm H DELUXE PLASTIC
OUTDOOR DOG HOUSE
COMPONENTS
Prior to assembly, be sure to identify and sort all components shown below.
23
2PCS
Side Panel
1
1PC
Front Panel
1PC
Back Panel
4
2PCS
Roof Panel
5
2PCS
Bottom Panel
4
4
3
1
2
3
5
5
STEP 1
FINISHED
ASSEMBLY
Connect bottom panel (5). Insert side panel (3) into notches. Turn the house on its side and
insert side panel (3) into notches.
STEP 5 STEP 6STEP 4
Turn the house vertically to attach the
back panel (2) by placing it into the
notches on panel(3).
Flip the house to rest the back
panel (2) on the floor and insert the
front panel (1) into the notches.
Connect the roof panel (4).
STEP 7
Place the connected roof pane onto the
house starting with the notches closer to
the center of the roof and attach the
corners once the middle is fully secured.
5
5
3
3
2
1
4
4
/