2. V I V O
  3. PT-SD-CP01A
PT-SD-CP01A

V I V O PT-SD-CP01A User manual

  • Hello! I've reviewed the instruction manual for the VIVO Desk C-Clamp PT-SD-CP01A/AW. This document provides detailed assembly instructions, lists the package contents and specifies the tools required. I'm here to help you with any questions you might have about this product and its installation, or anything else from the document.
  • What should I do if I don't understand the directions?
    What should I do if there are missing or defective parts?
    What is the average resolution time when contacting support by phone?
    What is the average response time when contacting support by email?
4” Desk C-Clamp for Monitor Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/pt-sd-cp01a
SKU: PT-SD-CP01A/AW
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
2
PACKAGE CONTENTS
TOOLS NEEDED
WARNING!
3mm Allen
Wrench
A (x1)
Clamp
B (x1)
Adapter
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please contact our product support team at 309-278-5303 or [email protected] for
further assistance. Check carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for any purpose that is not
explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or
injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS.
ADULT SUPERVISION IS REQUIRED.
ASSEMBLY STEPS
STEP 1
Set Clamp (A) aside until the next step. Test fit one M6x12 mm Screw (S-A) with your pole.
If the screw fits: Remove the screw and move on to the next step.
If the screw is too large: Attach Adapter (B) to the pole using the screws and a 3mm Allen
Wrench that came with the stand.
S-A (x3)
M6x12mm Screw
B
From original
stand
3mm Allen
Wrench
3
STEP 2
Loosen the knob on Clamp (A).
STEP 3
If Adapter (B) is not used: Assemble Clamp (A) to the pole using the M6x16mm screws and a 3mm
Allen Wrench that came with the original stand.
If Adapter (B) is used: Assemble Clamp (A) to the pole using M6x12mm Screws (S-A) and a 3mm Allen
Wrench.
S-A
3mm Allen
Wrench
AB
From original
stand
3mm Allen
Wrench
LAST UPDATED: 07/13/2023
REV2.1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303
/