2. Home
  3. Domestic appliances
  4. Floor care
  5. Robotic vacuum cleaners
  6. iRobot
  7. Rebooting
Rebooting

iRobot Rebooting Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the iRobot Rebooting Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Rebooting
or Resetting
Your Robot
User Manual
OVERVIEW
ABOUT THIS ITEM
●POWERFUL CLEANING—SCHEDULED AROUND YOUR LIFE - Roomba i3 EVO takes care
of dirt and messes with a Premium 3-Stage Cleaning System and 10x the Power-Lifting
Suction. Compared to Roomba 600 series.Runtime : 75 minutes|
●CLEAN BY ROOM, YOU’RE IN CONTROL - Roomba i3 EVO learns your home and creates
an Imprint Smart Map so you can direct it to clean any room you want, any time you
want—either on a set schedule or in the moment.
●CLEANING IN TIDY ROWS - Cleans intelligently in straight lines back and forth, to thoroughly
clean your floors while navigating around furniture. When the i3 EVO needs to recharge, it will
resume right where it left off ensuring a complete clean. Charger : 120V and 60Hz
●FOCUSED CLEANING - Patented Dirt Detect Technology allows the Roomba i3 EVO to detect
dirtier areas of your home and clean them more thoroughly. Integrated sensors tell the robot
where it can and can’t fit, so it doesn’t get stuck under furniture.
●PERFECT FOR HOMES WITH PETS - Instead of using a single bristle brush, Roomba i3 EVO
uses Dual Multi-Surface Rubber Brushes that flex to adjust to different floor types and avoid
getting tangled with pet hair.
●STAYS ONE STEP AHEAD OF THE MESS - The i3 EVO learns your cleaning habits and can
offer up suggestions—even suggesting extra cleanings during peak pollen or shedding
season.
IRobot does not certify the quality or authenticity of products purchased from non-authorized
resellers, and will not cover claims, provide service or offer replacements for products purchased
from these sellers.
●CLEAN BY VOICE - Start cleaning one room or every room with Google Assistant and Alexa.
Works with Google Home and Alexa enabled devices. Alexa and all related logos are
trademarks of Amazon.com or its affiliates. Google is a trademark of Google LLC
●FLEXIBILITY TO CLEAN AROUND YOUR BUSY LIFE - The i3 EVO can be set to
automatically start cleaning when you leave and stop when you come home. And with
Cleaning Time Estimates Roomba tells you how long each room takes to vacuum in the
iRobot Home App.
●GETTING SMARTER and SMARTER - Quality that lasts. Intelligence that grows. Your robot
vacuum gets new features through automatic software updates—for a smarter level of clean.
DESCRIPTION
Now the Roomba i3 EVO robot vacuum is smarter than ever, learning and mapping your home
room-by-room so it can clean the room you want, when you want—with 10x the Power-Lifting
Suction* and Premium 3-Stage Cleaning System. Powered by iRobot Genius, it stays one step
ahead of everyday messes, by learning your life and suggesting cleaning schedules—to clean
when you’re out enjoying life. On-demand cleaning is only a command away, with Google Assistant
and Alexa compatibility** that let you direct your robot to messes right when they happen. With
Clean Base Automatic Dirt Disposal, Roomba will return itself to the base when the bin is full,
automatically empty and resume cleaning, so you don’t have to think about emptying the bin for
months at a time. (*Compared to the Roomba 600 series cleaning system) *(compared to the
Roomba 600 series cleaning system) *(Alexa and all related logos are trademarks of Amazon.com
or its affiliates. Google is a trademark of Google LLC)
HOW TO RESET
How to restart your Roomba robot
Resetting your Roomba can be done in one of two ways. One is by restarting the device, and
the other is by reverting to the factory default settings.
While a simple restart or reboot will turn the robot on and off, this method only works if you have
lost wireless connectivity or there is some other sort of technical issue. Once the robot is
operational, the app data, including login information, saved maps, and other user preferences,
will remain the same.
Restoring the factory default settings can be a wise choice when trying to resolve underlying
problems. You can start over by resetting, which will remove all settings and any saved data.
For the Braava jet m Series, press and hold the CLEAN button on your robot for 20 seconds.
When the button is released, the light ring around the tank lid will swirl clockwise in white. It
can take up to a minute and a half for the robot to turn on. The reboot procedure is complete
when the light ring shuts off.
Braava jet
Hard RESET
For the S, I, and 900 series, perform a hard reset. Press and hold the Home, Spot Clean, and
Clean buttons at the same time for about 10 seconds. You’ll see the light ring around the Clean
button to begin swirling on your device. Once you see the light ring glow on the robot around the
buttons, let go of the three buttons. The Roomba will now restart indicating that the Roomba has
now been reset. on the 800 and 600 series Press and hold the Home, Spot Clean, and Clean
buttons on your robot for about 10 seconds. Once you hear a beep sound emanating out of the
Roomba robot, release the three buttons and allow the robot to reboot. Release the three buttons
when you hear the Roomba robot make a beeping noise and let it reboot.
LIGHT RESET
You can use the Roomba companion app to reset the settings to default for all iRobot Roomba
models. All user data, including as language choices, cleaning preferences, time zone
preferences, etc., will be deleted from the app and the cloud account once the settings have been
returned to their factory defaults. Any imprint smart maps that you have produced will also be
deleted.
You can adhere to following instructions to learn how to reset a roomba utilising the soft
reset technique:
Click the Settings button in the Roomba app after opening it. The Factory RESET button should be
tapped. This will immediately start your robot's factory reset procedure. You can set the robot after
it has restarted.
●What should I do if I want to store the robot for a long period of time?
Charge it fully and turn it off before placing it in a cool dry place. Recharge it at least every three
months to prevent the battery over discharging.
Manuals.plus
● Can I use the vacuum in a room with lit candles or fragile objects on the floor?
No, it is not recommended to operate the vacuum in an area where there are lit candles or
fragile objects on the floor to be cleaned.
● Can I allow children to sit on the vacuum?
No, it is not recommended to allow children to sit on the vacuum.
Manuals.plus
●What should I do if the robot fails to find the dock?
Place the robot on the dock manually to recharge.
●What should I do if the robot is paused for over 10 minutes?
It will go to sleep, and the power indicator will flash every few seconds. Press any button to
wake the robot up.
●Can I operate the vacuum in a room where an infant or child is sleeping?
No, it is not recommended to operate the vacuum in a room where an infant or child is sleeping.
Manuals.plus
Like And Subscribe
us for more Videos
Manuals.plus
/