Symantec 300 Series Quick Start Card

300 Series
Symantec
Brand
Symantec
Model
300 Series
Type
Quick Start Card

This manual is also suitable for

Symantec Corporation
20330 Stevens Creek Boulevard
Cupertino, CA 95014 USA
1 408 517 8000
1 800 721 3934
www.symantec.com
Symantec
™
Gateway Security 320, 360, 360R
Quick Start Card
This card contains instructions for installing the Symantec Gateway
Security 300 Series appliance and connecting it to an outside network
or the Internet.
Models 320, 360, and 360R have four DIP switches, one serial port,
one reset button, one power connector, and one power button.
Model 320 back panel
Model 320 has four Ethernet LAN ports and one Ethernet WAN port.
Model 360 back panel
Model 360 has eight Ethernet LAN ports and two Ethernet WAN ports.
Symantec Gateway Security 300 Series
Symantec and the Symantec logo are U.S. registered trademarks of the Symantec Corporation. Symantec Gateway Security is a trademark
of Symantec Corporation. Other brands and products are trademarks of their respective holders. Copyright © 2004 Symantec Corporation.
All rights reserved. All product information is subject to change without notice. 3/04 10224354
0 255075100
3C
4C
50K
50C
41M
41Y
JOB # CLIENT
DATE
7081172
03.10.04 1
8.5 x 117081172Q01r0.qxd
wm
150
DCL
10224354
QUICKSTART CARD FRONT
PROOF # TRIM SIZEFILE NAME
DESC./TITLE
MSTR#
Operator
LINE SCREEN
CYAN MAGENTA YELLOW BLACK SYMYELLOW
CELL # 1
Installing the appliance
1. Ensure that the DIP switches are in the off (down) position.( )
2. Plug the power cord into the appliance. Plug the power cord
into an electrical wall socket.( )
3. Plug your Internet connection into a WAN port.( )
4. If you are using a dial-up Internet connection, plug the serial
cable from your external modem into the serial port.( )
5. Plug the Ethernet cables from the computers to be protected
into the LAN ports.( )
6. Press the power button to turn on the appliance.( )
7. Wait for the first LED on the front panel to illuminate solid, Ł
and the third LED on the front panel to blink if one or more Ł
active devices are connected to a LAN port.
Configuring your appliance
The first time you access the appliance, the Setup Wizard guides
you through getting Internet connectivity.
To configure the appliance
1. In a Web browser, in the address text box, type 192.168.0.1.
2. Press Enter.
3. In the Setup Wizard, follow the prompts to connect the
appliance to the Internet.
Where to get more information
For more information on configuring your appliance, see the
following documents:
– Installation Guide
– Getting Started Guide
– Administrator ’s Guide
See the Release Notes for the latest compatibility and function-
ality information.
Online Help is available by clicking the Help button at the top
right of each screen.
0 255075100
3C
4C
50K
50C
41M
41Y
JOB # CLIENT
DATE
7081172
03.10.04 1
8.5 x 117081172Q02r0.qxd
wm
150
DCL
10224354
QUICKSTART CARD BACK
PROOF # TRIM SIZEFILE NAME
DESC./TITLE
MSTR#
Operator
LINE SCREEN
CYAN MAGENTA YELLOW BLACK
CELL # 1
  • Page 1 1
  • Page 2 2

Symantec 300 Series Quick Start Card

300 Series
Symantec
Brand
Symantec
Model
300 Series
Type
Quick Start Card
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents