Pelco Sarix Professional IWP 2 Wedge Installation guide
- Category
- Security camera accessories
- Type
- Installation guide
Pelco Sarix Professional IWP 2 Wedge is a rugged environmental wedge dome camera designed for both indoor and outdoor use. With its 2MP resolution and Sarix image processing technology, it delivers clear and detailed images even in challenging lighting conditions. The camera's vandal-resistant design and IP66 rating make it ideal for use in harsh environments. Additionally, the IWP 2 Wedge supports two-way audio communication, allowing for real-time interaction with remote parties.
Pelco Sarix Professional IWP 2 Wedge is a rugged environmental wedge dome camera designed for both indoor and outdoor use. With its 2MP resolution and Sarix image processing technology, it delivers clear and detailed images even in challenging lighting conditions. The camera's vandal-resistant design and IP66 rating make it ideal for use in harsh environments. Additionally, the IWP 2 Wedge supports two-way audio communication, allowing for real-time interaction with remote parties.
C2297M-B-EN (12/16)
Sarix
®
Professional IWP
Series Rugged
Environmental Wedge Dome
Quick Start Guide
IWP121-1ES
IWP221-1ES
2
Contents
Contents ....................................................................................................................................................................................... 2
Important Notices Statement ........................................................................................................................................................ 3
Regulatory Notices ......................................................................................................................................................... 3
Radio and Television Interference ................................................................................................................................. 3
Korean Class A EMC ............................................................................................................................................................ 3
Warranty Statement ..................................................................................................................................................................... 3
UL Safety Notices .......................................................................................................................................................... 3
Models Instructions ...................................................................................................................................................................... 4
Description ................................................................................................................................................................................... 5
Package Contents ........................................................................................................................................................................ 5
Optional Accessories .................................................................................................................................................................... 5
Installation .................................................................................................................................................................................... 5
Wall/Ceiling Surface Mount ............................................................................................................................................ 6
Surface Mount with IMPEBAP ....................................................................................................................................... 7
Wall Mount with IMPPMB-1I .......................................................................................................................................... 8
PoE Port & Waterproof Connector (IWPWPC) Wiring Procedure .................................................................................... 9
Positioning & Adjusting the Field of View ....................................................................................................................... 9
Pelco Troubleshooting Contact Information ............................................................................................................................... 10
Note for Dimension Drawings ..................................................................................................................................................... 10
3
Important Notices Statement
For information about Pelco’s product-specific important notices and thereto related information, refer to www.pelco.com/legal.
REGULATORY NOTICES
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
RADIO AND TELEVISION INTERFERENCE
This equipment has been tested and found to comply with the limits of a Class A digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Changes and Modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority
to operate this equipment under Federal Communications Commission’s rules.
CAN ICES-3(A)/NMB-3(A)
Korean Class A EMC
Warranty Statement
For information about Pelco’s product warranty and thereto related information, refer to www.pelco.com/warranty.
UL SAFETY NOTICES
The product shall be installed by a qualified service person and the installation shall conform to all local codes.
4
Models Instructions
The physical appearances and installation methods for the models indicated within the list below are, by and large, the same.
Therefore, please regard use quick guide where we use the example from IWP221-1ES as a reference to apply to all the
models.
Model
Description
IWP121-1ES
1MP Rugged Environmental Wedge Dome Camera
IWP221-1ES
2MP Rugged Environmental Wedge Dome Camera
5
Description
The Sarix® Professional Series IP Rugged Environmental Wedge Dome is ideal for both indoor and outdoor applications.
Before installing it, please verify your model and read this guide carefully
Package Contents
Fixed Flat Dome Camera * 1
Plastic Anchor * 2
Flat Head Screw (Tapping Type) * 2
Security Torx Wrench * 1
Mounting Template * 1
Desiccant * 1
Important Notices Declaration * 1
Printed Quick Start Guide * 1
Supplemental Resources Sheet * 1
Important Safety Instruction * 1
ROHS Statement Slip * 1
Optional Accessories
IMPEBAP: a Sarix 4S electrical box adaptor for Wedge Dome
IMPPMB-1I: a Sarix L-shape wall bracket mount for Wedge Dome
IWPWPC: a waterproof connector
Installation
You can install the Sarix® Professional Series Rugged Environmental Wedge Dome using the following
method.
Wall/Ceiling Surface Mount
Surface Mount with IMPEBAP
Wall Mount with IMPPMB-1I
6
WALL/CEILING SURFACE MOUNT
Install the wedge dome camera to a surface (wall/ceiling) as shown in the following procedure.
1. Loosen the 2 screws via torx wrench followed by removing the top cover. Connect PoE port with RJ-45 connector via
Ethernet cable that links with PoE compatible network device and wire the audio in/out devices with the audio in/out ports
individually if required. Also, Insert micro SD card into the slot if needed.
2. After attaching the mounting template to the surface, drill two holes indicated on the mounting surface and insert the
plastic anchors into the holes. Also, drill another hole with Ø 30mm in diameter as indicated for cables threading.
Eventually, secure the camera body onto the surface by fastening the 2 tapping screws.
3. Flip over the dome cover and stick the included desiccant to the rectangular recess as the figure shown.
4. Attach the dome cover to the camera body and securely tighten them by torx wrench to complete installation.
1
2
3
4
7
SURFACE MOUNT WITH IMPEBAP
You can mount the camera to a surface with IMPEBAP, a Sarix 4S electrical box adaptor mount for
Wedge Dome. Refer to the figures below for surface installation with IMPEBAP.
1. Fix the adaptor plate to the surface embedded with 4S electrical box with 2 screws. Note the hole pattern with “4”
indicators that represent the exact holes for 4S installation on the adaptor for proper mounting.
2. Pass all the cable thread from camera body into the adaptor plate and surface followed by wiring them if necessary.
Fasten the camera body onto the adaptor plate with 2 screws. Note the hole pattern with “W” indicators that represent
the exact holes for Wedge Dome installation on the adaptor for proper mounting.
3. Attach the dome cover to the camera body that was fixed with the adaptor plate already, and tightly secure the 2 screws
of dome cover by torx wrench.
4. The Wedge Dome is eventually properly mounted on the surface with IMPEBAP.
1
2
3
4
8
WALL MOUNT WITH IMPPMB-1I
Wall mount with IMPPMB-1I requires both the L-shape bracket and the adaptor plate from IMPEBAP. Refer to the figures
below for detailed process for Wall Mount with IMPPMB-1I.
1. Fasten the L-shape bracket onto the desired wall with 4 screws.
2. Further fix the adaptor plate from IMPEBAP onto the L-shape bracket with 2 screws. Note the hole pattern with
“L” indicators that represent the exact holes for L-shape bracket assembly on the adaptor for proper installation.
3. Pass all the cable thread from camera body into the adaptor plate and L-shape bracket followed by wiring them if
necessary. Fasten the camera body onto the adaptor plate with 2 screws. Note the hole pattern with “W”
indicators that represent the exact holes for Wedge Dome installation on the adaptor for proper mounting.
4. Attach the dome cover to the camera body that was fixed with the adaptor plate already, and tightly secure the 2
screws of dome cover by torx wrench.
5. The Wedge Dome is eventually properly mounted on the wall with IMPPMB-1I.
1
3
2
4
5
9
POE PORT & WATERPROOF CONNECTOR (IWPWPC) WIRING PROCEDURE
1. Terminate the Ethernet cable with a RJ45 Connector after the cable passes through the waterproof connector.
2. Encircle the PoE Port Cable with the Rubber O-Ring firmly.
3. Plug the RJ45 Connector into the PoE Port Cable solidly for power supply and network connection.
4. Assemble the Waterproof Connector together with the PoE Port Cable tightly for ingress protection.
POSITIONING & ADJUSTING THE FIELD OF VIEW
1. Loosen the two screws beside the lens as shown in the figure below.
2. Adjust the lens to a desired shooting angle for suitable field of view.
NOTE: Make sure to relock the 2 screws tightly after adjustment.
The lens can be adjusted vertically & horizontally
once the two indicated screws are fully loosened.
PoE Port Cable
RJ45 Connector
Ethernet Cable
Waterproof Connector
Rubber O-Ring
10
Pelco Troubleshooting Contact Information
If the instructions provided fail to solve your problem, contact Pelco Product Support at 1-800-289-9100 (USA and Canada) or
+1-559-292-1981 (international) for assistance. Be sure to have the serial number available when calling.
Do not try to repair the unit yourself. Leave maintenance and repairs to qualified technical personnel only.
Note for Dimension Drawings
NOTE: VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.
RUGGED ENVIRONMENTAL WEDGE DOME
11
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
Pelco Sarix Professional IWP 2 Wedge Installation guide
- Category
- Security camera accessories
- Type
- Installation guide
Pelco Sarix Professional IWP 2 Wedge is a rugged environmental wedge dome camera designed for both indoor and outdoor use. With its 2MP resolution and Sarix image processing technology, it delivers clear and detailed images even in challenging lighting conditions. The camera's vandal-resistant design and IP66 rating make it ideal for use in harsh environments. Additionally, the IWP 2 Wedge supports two-way audio communication, allowing for real-time interaction with remote parties.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Pelco Sarix Professional IWP 2 Wedge User manual
-
Pelco IMELD2-0I and IMELD2-0E Smoke Dome Accessory Installation guide
-
-
-
-
Pelco Sarix Professional IMP IJP 2 Sery User manual
-
Pelco Sarix Enhanced 3 IME Dome User manual
-
-
-
