Kenuco DS-1663ZJ User guide

Brand
Kenuco
Model
DS-1663ZJ
Category
Camera mounting accessories
Type
User guide
DS-1663ZJ
Ceiling Mounting Bracket Indoor/Outdoor
Features:
Aluminum alloy material with surface spray treatment
General design for indoor/outdoor
Design of cable entrance hole
Complementary rubber blanket pad for waterproofness
Dimension:
Order model:
DS-1663ZJ
Parameters:
Model
Parameter
DS-1663ZJ
Pendent Mounting Bracket In/Outdoor
Color
Hik white
Feature
Suitable for speed dome ceiling mount
(not suitable for DS-2AE-714）
Material
Aluminum alloy
Dimension
Φ116.5×57mm
Weight
380g
Notice:
The bracket should be installed on the flat surface of a
wall
The wall must be capable of supporting more than 3
times the total load of the camera and the mount.
The maximum load capacity of the mount is 30KG
Installation steps:
① Choose the appropriate wall to mount the ceiling plate, ② Fix adaptor to ceiling plate
and rubber blanket should be used when assembling outdoors
A: Waterproof rubber pad B: Tightening screw C: Adaptor
③ Fix with tightening screw, thread the cable and ④ Tighten up the set screw and complete the installation
Install the speed dome
D: Set screw
Note: The actual bracket may vary from the picture above.
Indoor
Outdoor
A
B
C
D
  • Page 1 1

Kenuco DS-1663ZJ User guide

Brand
Kenuco
Model
DS-1663ZJ
Category
Camera mounting accessories
Type
User guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents