Myard PNP114040-R Installation guide

Type
Installation guide
Myard
PNP114040-R 4x4 (Actual 3.5x3.5) Inches Post Base Cover Skirt
Flange w/Screws for Deck Porch Handrail Railing Support Trim Anchor
(Qty 1, Red Clay)
Please read full description before order. Perfect for deck supports, porch railing,
hand rails and post holders. Also, can be used as table leg / mailbox post support
brackets.
Fits a nominal standard 4"x 4" post (actual 3.5"x 3.5" dry post on market).
Sanding / trimming may be required depending on post type and little size error.
POST HEIGHT LIMIT: 60" (5-feet), NOT for roof support
Made from paintable durable High-Strength Nylon + Anti-UV + FRP (Fiber Reinforced
Plastic). NO fading, aging, and weakening from sun exposure. UV-resistant.
Stainless Steel 304 screws are included: 8 short screws (installed horizontally) to
post. 12 long screws (vertically) to deck floor board. ▼Thicker & higher post base
bottom for better structural strength on decks.
Clean contemporary style. Re-designed for better looking. Fast & easy post
installation in minutes. Use with Myard Railing Connectors and Post Caps for match
looking. (search "PNP 115445" and "PNP111902" )
  • Page 1 1
  • Page 2 2

Myard PNP114040-R Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI