Myard PNP114040-R Installation guide

Myard

PNP114040-R 4x4 (Actual 3.5x3.5) Inches Post Base Cover Skirt

Flange w/Screws for Deck Porch Handrail Railing Support Trim Anchor

(Qty 1, Red Clay)

▼ Please read full description before order. ▼ Perfect for deck supports, porch railing,

hand rails and post holders. Also, can be used as table leg / mailbox post support

brackets.

▼ Fits a nominal standard 4"x 4" post (actual 3.5"x 3.5" dry post on market). ▼

Sanding / trimming may be required depending on post type and little size error.★

POST HEIGHT LIMIT: 60" (5-feet), NOT for roof support ★

▼ Made from paintable durable High-Strength Nylon + Anti-UV + FRP (Fiber Reinforced

Plastic). NO fading, aging, and weakening from sun exposure. UV-resistant.

▼ Stainless Steel 304 screws are included: 8 short screws (installed horizontally) to

post. 12 long screws (vertically) to deck floor board. ▼Thicker & higher post base

bottom for better structural strength on decks.

▼ Clean contemporary style. Re-designed for better looking. Fast & easy post

installation in minutes. ▼ Use with Myard Railing Connectors and Post Caps for match

looking. (search "PNP 115445" and "PNP111902" )

Download PDF