Vizio E65-E1 User manual

Type
User manual

This manual is also suitable for

Model E55-E1, E55-E2, E60-E3, E65-E0, E65-E1, E70-E3, E75-E1, E75-E3, & E80-E3
USER MANUAL
VIZIO
Safety & Certication
ii
THANK YOU FOR CHOOSING VIZIO
And congratulations on your new VIZIO Display.
To get the most out of your new VIZIO product, read these instructions
before using your product and retain them for future reference. Be sure to
inspect the package contents to ensure there are no missing or damaged
parts.
PRODUCT REGISTRATION
To purchase or inquire about accessories and installation services for your
VIZIO product, visit our website at www.VIZIO.com or call toll free at (877)
698-4946.
We recommend that you register your VIZIO product at
www.VIZIO.com
Extended Warranties
For peace of mind, and to protect your investment beyond the standard
warranty, VIZIO oers on-site extended warranty service plans. These
plans provide additional coverage during the standard warranty period.
To purchase an extended warranty service plan, visit www.VIZIO.com.
WHEN READING THIS MANUAL
When you see this symbol, please read the
accompanying important warning or notice. It is
intended to alert you to the presence of important
operating instructions.
IMPORTANT SAFETY INSTRUCTIONS
Your Display is designed and manufactured to operate within dened
design limits. Misuse may result in electric shock or re. To prevent
your Display from being damaged, the following instructions should be
observed for the installation, use, and maintenance of your Display. Read
the following safety instructions before operating your Display. Keep these
instructions in a safe place for future reference.
To reduce the risk of electric shock or component damage, switch
o the power before connecting other components to your
Display.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including ampliers) that
produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not t into
your outlet, consult an electrician for replacement of the obsolete
outlet.
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
Only use attachments/accessories specied by the manufacturer.
Use only with the cart, stand, tripod, bracket, or
table specied by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused
for long periods of time.
Refer all servicing to qualied service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as the power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally,
or has been dropped.
Unplug the power cord before cleaning your Display.
When moving your Display from an area of low temperature to an
area of high temperature, condensation may form in the housing.
Wait before turning on your Display to avoid causing re, electric
shock, or component damage.
A distance of at least three feet should be maintained between
your Display and any heat source, such as a radiator, heater,
oven, amplier etc. Do not install your Display close to smoke.
Operating your Display close to smoke or moisture may cause re
or electric shock.
Slots and openings in the back and bottom of the cabinet
are provided for ventilation. To ensure reliable operation of
your Display and to protect it from overheating, be sure these
openings are not blocked or covered. Do not place your Display in
a bookcase or cabinet unless proper ventilation is provided.
Never push any object into the slots and openings on your
Display cabinet. Do not place any objects on the top of your
Display. Doing so could short circuit parts causing a re or electric
shock. Never spill liquids on your Display.
Your Display should be operated only from the type of power
source indicated on the label. If you are not sure of the type of
power supplied to your home, consult your dealer or local power
company.
When you see this symbol, please read the
accompanying helpful tip.
iii
Do not apply pressure or throw objects at your Display. This
may compromise the integrity of the display. The manufacturer’s
warranty does not cover user abuse or improper installations.
The power cord must be replaced when using dierent voltage
than the voltage specied. For more information, contact your
dealer.
When connected to a power outlet, power is always owing into
your Display. To totally disconnect power, unplug the power cord.
The lightning ash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of
un-isolated, dangerous voltage within the inside of your Display
that may be of sucient magnitude to constitute a risk of electric
shock to persons.
Do not overload power strips and extension cords. Overloading
can result in re or electric shock.
The wall socket should be installed near your Display and easily
accessible.
Only power of the marked voltage can be used for your Display.
Any other voltage than the specied voltage may cause re or
electric shock.
Do not touch the power cord during lightning. To avoid electric
shock, avoid handling the power cord during electrical storms.
Unplug your Display during a lightning storm or when it will not
be used for long period of time. This will protect your Display
from damage due to power surges.
Do not attempt to repair or service your Display yourself.
Opening or removing the back cover may expose you to high
voltages, electric shock, and other hazards. If repair is required,
contact your dealer and refer all servicing to qualied service
personnel.
WARNING: Keep your Display away from moisture. Do not expose
your Display to rain or moisture. If water penetrates into your
Display, unplug the power cord and contact your dealer. Continuous
use in this case may result in re or electric shock.
Do not use your Display if any abnormality occurs. If any smoke
or odor becomes apparent, unplug the power cord and contact
your dealer immediately. Do not try to repair your Display
yourself.
Avoid using dropped or damaged appliances. If your Display is
dropped and the housing is damaged, the internal components
may function abnormally. Unplug the power cord immediately
and contact your dealer for repair. Continued use of your Display
may cause re or electric shock.
Do not install your Display in an area with heavy dust or high
humidity. Operating your Display in environments with heavy
dust or high humidity may cause re or electric shock.
Follow instructions for moving your Display. Ensure that the
power cord and any other cables are unplugged before moving
your Display.
When unplugging your Display, hold the AC/DC power adapter,
not the cord. Pulling on the power cord may damage the wires
inside the cord and cause re or electric shock. When your
Display will not be used for an extended period of time, unplug
the power cord.
To reduce risk of electric shock, do not touch the connector with
wet hands.
Insert batteries in accordance with instructions. Incorrect
polarities may cause the batteries to leak which can damage the
remote control or injure the operator. Do not expose batteries to
excessive heat such as sunshine, re or the like.
If any of the following occurs, contact the dealer:
- The power cord fails or frays.
- Liquid sprays or any object drops into your Display.
- Your Display is exposed to rain or other moisture.
- Your Display is dropped or damaged in any way.
- The performance of your Display changes substantially.
This apparatus shall not be exposed to dripping or splashing and
no objects lled with liquids, such as vases, shall be placed on the
apparatus.
The mains plug or appliance coupler is used as the disconnect
device, the disconnect device shall remain readily operable.
CAUTION - These servicing instructions are for use by qualied
service personnel only. To reduce the risk of electric shock, do not
perform any servicing other than that contained in the operating
instructions unless you are qualied to do so.
The lightning ash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of
uninsulated DANGEROUS VOLTAGE within the product’s
enclosure that may be of sucient magnitude to constitute a risk
of electrical shock to persons.
WARNING: Exposure to loud sounds can damage your hearing
causing hearing loss and tinnitus (ringing or buzzing in the ears).
with continued exposure to loud noises, ears may become
accustomed to the sound level, which may result in permanent
damage to hearing without any noticeable discomfort.
Install the Display where it cannot be pulled, pushed or knocked
over.
Do not allow children to hang onto the product.
Store the accessories (remote, batteries, etc.) in a location safely
out of the reach of children.
The American Academy of Pediatrics discourages television
viewing for children younger than two years of age.
WARNING: Never place a television set in an
unstable location. A television set may fall, causing
serious personal injury or death.
Many injuries, particularly to children, can be
avoided by taking simple precautions such as:
Using cabinets or stands recommended by the manufacturer
of the television set.
Only using furniture that can safely support the television set
Ensuring the television set is not overhanging the edge of the
supporting furniture.
Not placing the television set on tall furniture (for example,
cupboards or bookcases) without anchoring both the furniture
and the television set to a suitable support.
Not placing the television set on cloth or other materials that
may be located between the television set and the supporting
furniture.
Educating children about the dangers of climbing on furniture
to reach the television set or its controls.
If your existing television set is being retained and relocated, the
same considerations as above should be applied.
iv
HDMI, the HDMI logo and High-Denition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing Limited.
DTS, the Symbol, & DTS and the Symbol together are
registered trademarks, and DTS Studio Sound is a
trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio, and the double-D symbol are
trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing Limited.
DTS, the Symbol, & DTS and the Symbol together are
registered trademarks, and DTS TruVolume is a trademark
of DTS, Inc. © DTS, Inc. All Rights Reserved.
Table Of Contents
v
Table Of Contents
Table Of Contents ........................................................v
Getting to Know Your Display
.....................................6
Front Panel ....................................................................................... 6
Rear Panel.........................................................................................7
Replacing the Batteries ...................................................................9
Completing First-Time Setup.......................................10
Navigating the On-Screen Menu ........................................................11
Changing the Input Source ................................................................11
Changing the Screen Aspect Ratio .....................................................12
Adjusting the Picture Settings ............................................................ 13
Adjusting More Picture Settings .....................................................14
Adjusting the Color Temperature ................................................... 14
Adjusting the Picture Mode Edit Settings ......................................15
Saving a Custom Picture Mode ....................................................... 15
Locking/ Unlocking a Custom Picture Mode .................................. 15
Deleting a Custom Picture Mode .................................................... 16
Resetting a Picture Mode ................................................................ 16
Adjusting the Color Tuner Settings ................................................17
Adjusting the Audio Settings .............................................................. 20
Changing the Equalizer Settings ..................................................... 20
Adjusting the network Settings .......................................................... 21
Setting Timers .....................................................................................23
Setting the Sleep Timer ................................................................... 23
Setting the Auto Power O Feature ...............................................23
Renaming Devices on the Input Menu
..............................................24
Changing the SYSTEM Settings ..........................................................25
Checking for System Updates ......................................................... 25
Viewing System Information ........................................................... 25
Setting the Time and Local Settings ...............................................25
Changing the On-Screen Menu Language .....................................26
Adjusting the CEC Settings .............................................................. 26
Adjusting the Power Mode ..............................................................26
Turning the Power Indicator On or O ..........................................27
Changing the Display Name............................................................27
Managing Mobile Devices ...............................................................27
Using the Reset & Admin Menu ......................................................... 28
Restoring the Display to Factory Default Settings .........................28
Using the Info Window .......................................................................29
Troubleshooting & Technical Support ........................30
Specications
...............................................................34
Regulatory Information
...............................................43
Legal Information.........................................................44
Limited Warranty
.........................................................45
Limited Warranty Mexico
............................................47
6
1
FRONT PANEL
REMOTE SENSOR & POWER INDICATOR
When using the remote, aim it directly at this sensor.
The power indicator ashes on when the Display turns on, then goes out after several seconds.
To keep the power indicator on as long as the Display is on, see
Turning the Power Indicator On or O.
Getting to Know Your Display
7
1
REAR PANEL
Components - Connect a component or composite devices.
USB - Connect a USB thumb drive to play photo, music, or video.
HDMI - Connect an HDMI device.
HDMI - Connect an HDMI device.
RCA Audio Out- Connect an RCA audio device, such as sound bar.
Power - Press to turn on the Display. Press and hold to turn the Display o.
Input - Press to access the input menu.
Note: The image shown here is for illustrative purposes only and may be subject to change.
The actual number of ports and their locations may vary, depending on the model.
Volume - Press to increase or decrease the Display volume level.
Ethernet - Connect an Ethernet cable to modem/ router.
Optical Audio Out - Connect an optical/SPDIF audio device, such as a home audio receiver
USB - Connect a USB thumb drive to play photo, music, or video.
8
1
To mount your Display on a wall, you will need a wall mount. Consult
the information on this page to nd the appropriate mount for your
Display.
Be sure the mount you choose is capable of supporting the
weight of the Display. After you have determined that you have
the correct mount for your Display, you can begin the installation.
To install your Display on a wall:
1. Disconnect any cables connected to your Display.
2. Place the Display face-down on a clean, at, stable surface. Be sure the
surface is clear of debris that can scratch or damage the Display.
3. Remove the stands by loosening and removing the screws.
4. Attach your Display and wall mount to the wall, carefully following the
instructions that came with your mount. Use only with a UL-listed wall
mount bracket rated for the weight/load of this Display.
WALL-MOUNTING THE DISPLAY
Installing a Display on a wall requires lifting.
To prevent injury or damage to the Display,
ask someone to help you.
E55-E1 E55-E2 E60-E3 E65-E0 E65-E1 E70-E3 E75-E1 E75-E3 E80-E3
Screw Size: M6 M6 M6 M6 M6 M6 M8 M6 M6
Hole Pattern:
200 mm (V)
x 200 mm (H)
200 mm (V)
x 200 mm (H)
400 mm (V)
x 400 mm (H)
400 mm (V)
x 400 mm (H)
400 mm (V)
x 400 mm (H)
400 mm (V)
x 400 mm (H)
400 mm (V)
x 400 mm (H)
400 mm (V)
x 400 mm (H)
400 mm (V)
x 400 mm (H)
Weight w/o Stand:
26.68 lb
(12.10 kg)
34.39 lb
(15.60 kg)
43.65 lb
(19.8 kg)
50.72 lb
(23 kg)
50.72 lb
(23 kg)
56.88 lb
(25.8 kg)
77.16 lb
(35 kg)
62.83 lb
(28.5 kg)
31.97 lb
(14.90 kg)
9
1
REMOTE CONTROL
USING THE REMOTE
1. Power - Turn TV on or O.
2. Input - Change the currently displayed input.
3. Exit - Close the on-screen menu.
4. Menu - Display the on-screen menu.
5. Arrows - Navigate the on-screen menu.
6. OK / Enter - Select the highlighted option / Conrm channel or
passcode entered using the number pad.
7. Back - Go to the previous on-screen menu.
8. Info - Display the info window.
9. Volume Up/Down - Increase or decrease the
loudness of the audio.
10. Closed Captions - open the closed caption menu.
11. PIC - Opens the picture mode menu.
12. Wide - Change the display mode.
13. Channel Up/Down - Not supported on this model.
14. Mute - Turn the audio on or o.
15. Last - Not supported on this model.
16. Number Pad - Not supported on this model.
17. Link - Launches pair with the VIZIO SmartCast App.
18. Dash - Not supported on this model.
3 4
5
6
7 8
10
11
13
14 15
16
2
9
12
1
17
18
Replacing the Batteries
1. Find the notch on the back of the remote. Insert a coin and pry open the back
cover.
2. Insert two batteries into the remote control. Make sure that the (+) and (-)
symbols on the batteries match the (+) and (-) symbols inside the battery
compartment.
3. Replace the battery cover.
In many places batteries cannot be thrown away or discarded with household
waste. Please ensure you properly dispose of your batteries consistent with the
laws and/or regulations where you live. For more information please visit
www.vizio.com/environment.
WARNING: keep the remote control batteries away from children. It may
cause choking and/or lead to a re or chemical burn if mishandled. Do not
dispose of batteries in re. Replace only with batteries of the correct type.
When needed, VIZIO recommends replacing the batteries that came
with this remote with two, new Duracell ‘AAA’ alkaline batteries.
2Completing First-Time Setup
The first time you turn on the Display, you can chose how to
setup your VIZIO SmartCast™ Display.
Complete Setup with the VIZIO SmartCast
App (recommended):
Download the free VIZIO SmartCast™ App on your smartphone
or tablet to set up your VIZIO display. Use your phone to power
on your display, adjust the volume, switch inputs, play and
control streaming content from your iOS or Android device.
Go to http://www.vizio.com/smartcastapp to get started.
-OR-
Complete Setup with the IR Remote:
Use the included IR remote to manually set up your display.
The VIZIO SmartCast™ App is still VIZIO’s recommended setup
method. Please note that a mobile device (not included) is still
required to cast content from apps like Netix and YouTube.
Before you begin the first-time setup:
Your Display should be installed and the power cord should
be connected to an electrical outlet.
Your devices should be connected.
If you have a wireless network, have the network password
ready.
If you are connecting to your network with an Ethernet cable,
connect it to the Ethernet port on the Display.
Need help installing the display?
Refer to the printed Quick Start Guide for detailed instructions on
how to install your new E-Series display. You can also nd a digital
copy on support.vizio.com
Setup with the VIZIO SmartCast™ App
1. Download the free VIZIO SmartCast™ App on to your mobile
device and launch the app.
2. Pair your mobile device to your display.
3. Follow the instructions your mobile device and display screen to
complete setup.
iOS Device Paring:
a. Select Get Started.
b. Hold your mobile device next to the VIZIO logo on your Display.
Android Device Pairing:
Note the Wi-Fi setup name on the top corner of your Display.
a. Select Get Started and Select your preferred language.
b. Select your Display name from the list shown on your device.
Setup with the IR Remote
1. Press the OK/Play key on your IR
remote during the initial setup
screen.
2. Use the Arrow Keys and the OK/
Play button to select and conrm
settings.
3. Follow the instruction on the
screen to complete setup.
Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.
10
3Using the On-Screen Menu
CHANGING THE INPUT SOURCE
External devices such as DVD players, Blu-ray Players, and video
game consoles can be connected to your Display. To use one of
these devices with your Display, you must rst change the input
source using the Input menu.
To change the input source:
1. Press the INPUT button on the remote. The Input menu is
displayed.
2. Use the Left/Right Arrow buttons or the INPUT button on the
remote to highlight the input you wish to view and press OK.
The selected input is displayed.
Note: Inputs may vary by Display.
Your Display features an easy-to-use on-screen menu.
To open the on-screen menu, press the MENU button on the remote.
From this menu, you can:
Adjust the Picture settings
Adjust the Audio settings
Adjust the Network settings
Setting the Sleep Timers
Name and adjust Inputs
Adjust System settings
Access the user manual
NAVIGATING THE ON-SCREEN MENU
To open the on-screen menu, press
the MENU button on the remote.
Use the Arrow buttons to highlight a
menu option, and press the OK button
to select that option.
While navigating the on-screen menu, you can
press the BACK button at any time to return to the
previous menu screen. The EXIT button will close the
on-screen menu.
Input Name
Display Settings
You can change the input names that appear on the
Input menu to make your devices easy to recognize.
See
Renaming Devices on the Input Menu
for more
information.
Change Input
CAST
HDMI-1 HDMI-2
HDMI-3
COMP
Picture
Audio
Network
Timers
Inputs
Closed Captions
System
User Manual
Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.
CC
11
3
CHANGING THE SCREEN ASPECT RATIO
The Display can display images in ve dierent modes: Normal,
Stretch, Panoramic, Wide, and Zoom. Each mode displays the picture
dierently.
Some programs have black bars on the top or sides of the picture
so that the picture keeps its original shape. Examples include
wide-screen movies and older television programs.
To change the screen aspect ratio:
1. Press the WIDE button on the
remote.
2. Use the Arrow buttons to
highlight the aspect ratio you
wish to view and press OK.
Normal preserves the content’s original aspect ratio and
size.
Standard Denition (480i and 480p—old Display
programs) - Since the 4:3 aspect ratio is not large enough
to ll the Display’s screen, black bars are added to the left
and right of the display image.
720p HD - Fills a 720p screen.
1080p and 1080i HD - Fills a 1080p or 1080i screen.
Stretch expands a widescreen image to ll the screen from
top to bottom and stretches it half as much from right to
left. Figures appear tall and thin.
Standard Denition - Not available.
720p and HD - If you are watching widescreen 1.85:1
content, the image will ll the screen. With 2.35:1
widescreen content, one-sixth of the image is cut o by
the left and right sides of the screen.
1080p and 1080i - Not available.
Note: Aspect ratio settings may vary by Input source.
Panoramic stretches a 4:3 aspect ratio picture to the left
and right edges of the screen. The center of the image is not
stretched, but the sides of the image are extremely stretched.
If you are watching widescreen (1.85:1 or 2.35:1) content with
black bars on the top and bottom, the black bars will still
appear on the top and bottom of the display image.
Standard Denition (480i and 480p) - Fills the screen from
the left to right edges.
720p - Not available.
1080p and 1080i - Not available.
Wide stretches a 4:3 aspect ratio picture to the edges of the
screen. Since the picture is being stretched, the display image
may appear distorted—gures appear short and fat. If the
program is already formatted for widescreen viewing (1.85:1
or 2.35:1), then black bars will appear on the top and bottom
of the display image.
Zoom expands images evenly in all directions (33% taller and
33% wider) with black bars to t the screen. A 720p image will
ll a 1080p screen.
Standard Denition - Not available.
720p HD - Fills a 720p screen
1080p and 1080i - Not available.
Wide
Zoom
Normal
Panoramic
Tip: The aspect ratio cannot be changed for Ultra HD
content or HDR content.
12
3
Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.
3. Use the Arrow buttons on the
remote to highlight Picture Mode,
then use the Left/Right Arrow
buttons to change the picture
mode:
Standard mode sets the
picture settings to the
default settings.
Calibrated mode sets the
picture settings to values
ideal for watching Display in a
brightly-lit room.
Calibrated Dark mode sets the
picture settings to values ideal
for watching Display in a dark
room.
Vivid mode sets the picture
settings to values that produce
a brighter, more vivid picture.
Game mode reduces
throughput delays and
optimizes the picture settings
for displaying game console
output.
Computer mode optimizes the picture settings for displaying
computer output.
ADJUSTING THE PICTURE SETTINGS
Your Display display can be adjusted to suit your preferences and
viewing conditions.
To adjust the picture settings:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight Picture and
press OK. The PICTURE menu is displayed.
If you’ve changes to the settings for a picture mode, an
asterisks appears after its name (see
Saving a Custom
Picture Mode
).
4. To manually change each of the picture settings, use the Up/
Down Arrow buttons on the remote to highlight that picture
setting, then use the Left/Right Arrow buttons to adjust the
setting:
Auto Brightness Control - The auto brightness control detects
the light levels in the room and automatically adjusts the
backlight for the best picture. Select O, Low, Medium, or
High.
Backlight - Adjusts the LED brightness to aect the overall
brilliance of the picture. Backlight cannot be adjusted when
starting from some picture modes.
Brightness - Adjusts the black level of the picture. When this
setting is too low, the picture may be too dark to distinguish
details. When this setting is too high, the picture may appear
faded or washed out.
Contrast - Adjusts the white level of the picture. When this
setting is too low, the picture may appear dark. When this
setting is too high, the picture may appear faded or washed
out. If the setting is too high or too low, detail may be dicult to
distinguish in dark or bright areas of the picture.
Color - Adjusts the intensity of the picture colors.
Tint - Adjusts the hue of the picture. This setting is useful in
adjusting the esh tones in the picture. If esh appears too
orange, reduce the level of color before adjusting tint.
Sharpness - Adjusts the edge sharpness of picture elements.
It can be used to sharpen non-HD (high denition) content;
however, it will not produce detail that does not otherwise exist.
5. When you have nished adjusting the picture settings, press
the EXIT button on the remote.
Picture
Picture Mode Calibrated
Auto Brightness Control Off
Backlight 90
Brightness 50
Contrast 50
Color 50
Tint 0
Sharpness 20
More Picture
Picture Mode Edit
Color Calibration
Back
Standard picture mode meets Energy Star® requirements.
For the best picture, switch to Calibrated mode. Note
that Calibrated mode does not meet Energy Star®
requirements. Customizing picture settings will change the
energy consumption required to operate the TV.
13
3
Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.
Adjusting More Picture Settings
To adjust more picture settings:
1. From the PICTURE menu, use the
Arrow buttons to highlight More
Picture, and then press OK.
2. Use the Arrow buttons to
highlight the setting you wish to
adjust, then press the Left/Right
Arrow buttons to change
the setting:
Color Temperature -
See
Adjusting the Color
Temperature.
Black Detail - Adjusts the
average brightness of the
picture to compensate for
large areas of brightness.
Select O, Low, Medium, or
High.
Active LED Zones - Dynamically improves the contrast ratio
of the picture by adjusting the backlight. The adjustment is
controlled by the content on the screen. Select On or O.
Motion Control - Adjusts motion related features (not on
all models)
Reduce Judder - Activates Smooth Motion motion
estimation/motion compensation, which suppresses motion
judder, or “stuttering” of the image when the camera moves
across a scene horizontally. As the setting increases, judder
is reduced.
Reduce Motion Blur - Increases frame rate to reduce
motion blur of 60 hertz video. As the setting increases,
motion blur is reduced.
Clear Action - Reduces blue in scenes with fast action.
Some sensitive viewers may notice ickering. Select On or
O.
Reduce Signal Noise - Diminishes artifacts in the image
caused by the digitizing of image motion content. Select
O, Low, Medium, or High.
Reduce Block Noise - Reduces pixelation and distortion for
mpeg les. Select O, Low, Medium, or High.
Game Low Latency - Select On to reduce video delay (lag)
when gaming.
Pure Cinema Mode - Optimizes the picture for watching
lm. Select Auto or O.
Color Space
- Select Color Space for the source. Video
sources uses YCbCr, but PC uses RGB.
Gamma - Set the shape of the Gamma curve. Use lower
Gamma values for bright room conditions, and higher
values when it’s dark.
3. When you have nished adjusting More Picture Settings, press the
EXIT button on the remote.
Adjusting the Color Temperature
Adjusting the color temperature changes the white balance of the
picture.
To adjust the color temperature:
1. From the MORE PICTURE menu,
use the Arrow buttons to
highlight Color Temperature,
and then press OK.
2. Use the Arrow buttons on the
remote to highlight a color
temperature preset and then
press OK.
Normal is optimized for
television viewing.
Cool produces a blue-hued
picture.
Computer optimizes the picture for use as a PC monitor.
When you have nished adjusting the color temperature,
press the EXIT button on the remote.
More Picture
Color Temperature Normal
Black Detail Off
Active LED Zones On
Motion Control
Clear Action Off
Reduce Noise
Game Low Latency Off
Pure Cinema Auto
Color Space Auto
Gamma 2.1
Back
Color Temperature
Normal
Cool
Computer
Back
Only available on HDMI inputs.
14
3
Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.
Adjusting the Picture Mode Edit Settings
Picture Mode Edit Settings allow you to make precise adjustments
to the picture and to create picture modes to save groups of picture
settings.
To adjust the Picture Mode Edit settings:
1. From the PICTURE menu, use the
Arrow buttons to highlight Picture
Mode Edit, and then press OK.
The PICTURE MODE EDIT menu is
displayed.
2. Use the Arrow buttons to
highlight the setting you wish to
adjust, then press OK to change
the setting:
Save Picture Mode - Save a
custom picture mode.
Lock Picture Mode - Prevent
changes to custom picture
modes. Choose between On or
O
Delete Picture Mode
- Delete
a saved picture mode settings.
* Not available on HDMI input 5.
Only available on customized preset modes.
Only available on HDMI input.
Saving a Custom Picture Mode
Custom picture modes allow you to save a group of custom settings
for various viewing conditions and video sources.
Changes made while on any preset picture mode will add an
asterisk on the top right corner of the preset mode.
The custom picture mode is not automatically saved.
To save a custom picture mode:
1. From the PICTURE MODE EDIT
menu, use the Arrow buttons to
highlight Save Picture Mode, and
then press OK. The SAVE PICTURE
MODE menu is displayed.
2. Use either on-screen keyboard
to enter a name for your custom
picture mode.
3. Highlight Save and press OK.
4. Press the EXIT button to exit the
menu screens.
Picture Mode Edit
Save Picture Mode
Lock Picture Mode
Delete Picture Mode - MyMode
Back
Picture Mode Edit
Save Picture Mode
Lock Picture Mode On
Reset Picture Mode - MyMode
Back
Save Picture Mode
Back
a b c d e f g h i
j k l m n o p q r
s t u v w x y z 0
1 2 3 4 5 6 7 8 9
.@# äêí Space
Save
Locking/ Unlocking a Custom Picture Mode
Custom picture modes can be locked/ unlocked with a unique PIN to
prevent accidental changes to their settings.
To lock all custom picture mode:
1. From the PICTURE MODE EDIT
menu, use the Arrow buttons
to highlight Lock Picture Mode,
and then press OK. If there is no
System Pin, then set a System
PIN.
2. Use the Arrow buttons to select
On.
3. Use the Number Pad on your
remote to enter a unique 4-digit
PIN.
4. Press the EXIT button to exit the
menu screens.
To unlock all custom picture mode:
1. From the PICTURE MODE EDIT menu, use the Arrow buttons
to highlight Lock Picture Mode, and then press OK. The
UNLOCKED PICTURE MODE menu is displayed.
2. Use the Arrow buttons to select O
3. Use the Number Pad on your remote to enter a unique 4-digit
PIN.
4. Make any desired changes to the picture mode.
5. Relock the picture modes, if desired.
6. Press the EXIT button to exit the menu screens.
System PIN code
Back
Change the PIN used for the System PIN.
Enter the 4-digit PIN using the numbers keys on
the remote.
Cancel
New PIN
Conrm PIN
15
3
Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.
Deleting a Custom Picture Mode
Custom picture modes that are no longer needed can be deleted.
To delete a custom picture mode:
1. From the PICTURE MODE EDIT
menu, use the Arrow buttons
to highlight Delete Picture
Mode, and then press OK. The
DELETE PICTURE MODE window
is displayed.
2. Use the Left/Right Arrow buttons to highlight Delete and press
OK.
3. Press the EXIT button to exit the menu screens.
Resetting a Picture Mode
A preset picture mode that has been edited can be restored to the
factory default settings.
To reset a customized preset picture mode:
1. From the PICTURE MODE EDIT
menu, use the Arrow buttons
to highlight Reset Picture
Mode, and then press OK. The
RESET PICTURE MODE window is
displayed.
2. Use the Left/Right Arrow buttons to highlight Reset and press
OK.
3. Press the EXIT button to exit the menu screens.
Inputs assigned to a deleted custom picture mode
become assigned to the
Calibrated
picture mode.
To delete the user created Custom 1 picture mode,
select the Delete button.
Delete Cancel
Select Reset to restore Standard
picture mode to factory defaults.
Reset Cancel
16
3
Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.
To turn color channels o and on:
1. From the COLOR CALIBRATION menu, use the Arrow buttons to
highlight Color Tuner, and then press OK. The Color Tuner menu
is displayed.
2. Use the Arrow buttons on the remote to highlight Red, Green, or
Blue.
3. Press the OK button to turn the color channel o or on. An X
appears over a color channel that has been turned o.
4. Use the Arrow buttons to highlight another color channel to turn
o or on. Only two color channels can be turned o at the same
time.
5. When you are nished with the color channels, press the EXIT
button.
Color Tuner
Red Green Blue Cyan Magenta Yellow
Hue 0 0 0 0 25 -14
Saturation -1 5 -4 0 -2 0
Brightness -24 0 -22 0 0 0
Offset 0 0 0
Gain 0 0 0
To adjust the 11 Point White Balance settings:
1. From the Color Tuner menu, use the Arrow buttons to highlight
Color Tuner, and then press the Left/Right Arrow buttons
until the 11 Point White Balance menu is displayed.
2. Use the Arrow buttons on the remote to highlight the Gain and
Color values you wish to adjust. Press the OK button and use
the Left/Right Arrow buttons to adjust the value. When you
are nished, press the OK button to save the setting.
3. When you are nished, press the EXIT button.
11 Point White Balance
Gain Red Green Blue
5% 0 0 0
Adjusting the Color Tuner Settings
The Color Tuner settings allow you to adjust the HSB color and 11
point white balance, turn color channels o for testing, and display
color bar, at, and ramp test patterns.
To adjust the HSB color settings:
1. From the COLOR CALIBRATION menu, use the Arrow buttons to
highlight Color Tuner, and then press OK. The Color Tuner
menu is displayed.
2. Use the Arrow buttons on the remote to highlight the Hue,
Saturation, Brightness, Oset, or Gain of the color you wish
to adjust. Press the OK button.
3. Use the Left/Right Arrow buttons to adjust the value. When
you are nished press the OK button to save the setting.
4. When you are nished adjusting the color tuner settings, press
the EXIT button.
Color Tuner
Red Green Blue Cyan Magenta Yellow
Hue 0 0 0 0 25 -14
Saturation -1 5 -4 0 -2 0
Brightness -24 0 -22 0 0 0
Offset 0 0 0
Gain 0 0 0
The Color Tuner, 11 Point White Balance, and test patterns
allow technicians to manually calibrate the Display. Calibration
requires specialized training, an input with precisely set
colors, and a specialized light meter.
17
3
Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.
To show or hide the Flat Test Pattern:
1. From the Color Tuner menu, use the Arrow buttons to highlight
Color Tuner, and then press the Left/Right Arrow buttons until
the Flat Test Pattern menu is displayed.
Flat Test Pattern
Off
2. Use the Arrow buttons on the remote to highlight O. Use the
Left/Right Arrow buttons to select the percentage brightness for
the at test pattern. Selecting a percentage immediately shows
the at pattern at that brightness.
—or—
To disable the Flat Test Pattern, use the Left/Right Arrow
buttons to highlight O.
3. When you are nished, press the EXIT button.
To show or hide the Ramp Test Pattern:
1. From the Color Tuner menu, use the Arrow buttons to highlight
Color Tuner, and then press the Left/Right Arrow buttons
until the Ramp Test Pattern menu is displayed.
2. Use the Arrow buttons on the remote to highlight O. Use the
Left/Right Arrow buttons to select the color for the ramp test
pattern. Selecting a color immediately shows that color ramp.
—or—
To hide the Ramp Test Pattern, use the Left/Right Arrow
buttons to highlight O.
3. When you are nished, press the EXIT button.
Ramp Test Pattern
Off
To show or hide the SMPTE Test Pattern:
1. From the Color Tuner menu, use the Arrow buttons to highlight
Color Tuner, and then press the Left/Right Arrow buttons until
the SMPTE Test Pattern menu is displayed.
SMPTE Test Pattern
Off
2. Use the Arrow buttons on the remote to highlight O. Use the
Left/Right Arrow buttons to highlight On to show the SMPTE
Pattern.
—or—
To hide the SMPTE Test Pattern, use the Left/Right Arrow
buttons to highlight O.
3. When you are nished, press the EXIT button.
18
3
Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.
To show or hide the Uniformity Analyzer Test Pattern:
1. From the Color Tuner menu, use the Arrow buttons to highlight
Color Tuner, and then press the Left/Right Arrow buttons until
the Uniformity Analyzer Test Pattern menu is displayed.
Uniformity Analyzer Test Pattern
Off
2. Use the Arrow buttons on the remote to highlight O. Use
the Left/Right Arrow buttons to highlight On to show the
Uniformity Analyzer Test Pattern.
—or—
To hide the Uniformity Analyzer Test Pattern, use the Left/
Right Arrow buttons to highlight O.
3. When you are nished, press the EXIT button.
19
3
Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.
ADJUSTING THE AUDIO SETTINGS
To adjust the audio settings:
1. Press the MENU button on the
remote. The on-screen menu
is displayed.
2. Use the Arrow buttons on the
remote to highlight Audio and
press OK. The AUDIO menu
is displayed.
3. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press Left/
Right Arrow buttons to change
the setting:
Speakers - Turns the built-in
speakers On or O.
Volume Control Display - Toggle between On or O to hide
or display the on-screen volume slider that appears when
volume is adjusted.
Surround Sound - Surround sound uses DTS TruSurround
to deliver an immersive surround sound experience from
the Display’s internal speakers. TruSurround completes the
entertainment experience by providing deep, rich bass and
by delivering crisp details and clear, intelligible dialog. Select
On or O.
Volume Leveling - Volume leveling uses DTS TruVolume
to
maintain consistent volume levels during transitions between
program content, AV formats, and input sources. Select On or
O. In a few cases, volume leveling may articially suppress
volume increases, making it dicult to hear dialog or attening
sudden noises. If this occurs, turn volume leveling o.
Balance - Adjusts the loudness of the audio output from the
When the Display speakers are set to On, DTS signals
cannot be passed through digital audio outputs.
left and right speakers.
Lip Sync - Adjusts the synchronization between the display
image and the accompanying audio track.
Digital Audio Out - Changes the type of processing for digital
audio out and HDMI ARC output when connected to a home
theater audio system. Select Auto, PCM, Dolby D, or Bitstream.
Analog Audio Out - Sets the volume control properties for
the RCA connector when connected to a home theater audio
system. Select Variable if you are controlling the volume with
the Display’s volume controls, or select Fixed if an external
audio device (sound bar or AV receiver) will control the volume.
Equalizer - Adjusts the boost or attenuation of dierent
frequencies using either preset or custom settings. See
Changing
the Equalizer Settings
.
4. When you have nished adjusting the audio settings, press the
EXIT button on the remote.
You must select Bitstream for audio with more than
two channels (3.0, 5.0, or 5.1, for example).
Changing the Equalizer Settings
The graphic equalizer has several pre-set modes and allows you to
create one custom mode.
To select a pre-set audio mode:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight Audio and
press OK. The AUDIO menu is displayed.
3. Use the Arrow buttons to highlight Equalizer and press OK.
The Audio Mode and equalizer settings screen appears.
4. Use the Left and Right Arrow buttons to select an audio mode.
The equalizer bars change to reect the mode.
5. Press the EXIT button on the remote.
To create, modify, or replace the single custom equalizer setting:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight Audio and
press OK. The AUDIO menu is displayed.
3. Use the Arrow buttons to highlight Equalizer and press OK.
The Audio Mode and equalizer settings screen appears.
4. Use the Left and Right Arrow buttons to select any audio
mode as a starting point.
5. Use the Arrow buttons to highlight a frequency and then press
OK.
6. Use the Up and Down Arrow buttons to adjust the boost (up)
and attenuation (down) for the frequency.
7. Use the Left and Right Arrow buttons to select another
frequency, if desired, and adjust it.
8. Press the EXIT button on the remote.
Audio
Speakers Auto
Volume Control Display On
Surround Sound Off
Volume Leveling Off
Balance 0
Lip Sync 0
Digital Audio Out Auto
Analog Audio Out Fixed
Equalizer
Back
20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49

Vizio E65-E1 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI