Dacota Gaming RETRO GAMING MACHINE 16 BIT MINI GAMING CONSOLE User manual

The control Module requires a set of 3 AA alkaline batteries. To insert the batteries, unscrew the battery door

as shown (Fig.2) and install the batteries with the positive (+) and negative (-) ends as shown in the battery

compartment. Replace the battery door and screw:

Battery Cautions:

Contents and specifications may vary from those illustrated.

Please retain the packaging information for future reference. MADE IN CHINA

Item: 8052C

3 “AA” alkaline batteries(not included)

No picture on LCD screen

Is the Game Console turned on?

2. Are the batteries properly installed?

3. Check if the batteries are flat and need replacing.

No game sound

Is the volume control too low, or off?

Picture on LCD screen is too dark:

1. Check if the batteries are flat and need replacing.

Fringes appear on LCD screen during broadcast & Picture is blinking or distorted:

1. Check if the batteries are flat and need replacing.

2.Try pushing the reset button, if there are no improvement.

3.Switch the Game Console off and try again.

200 In 1 micro arcade machine

Warning!

Joystick A button

B button

Reset Start Volume

PowerLoudspeaker

Download PDF