Educational Insights Design & Drill® Helicopter Product Instructions

Brand
Educational Insights
Model
Design & Drill® Helicopter
Type
Product Instructions

This manual is also suitable for

Educational Insights Design & Drill® Helicopter

This product is a build-and-play toy helicopter that comes with a motorized mini-drill for securing bolts and decorative stickers for customization. The helicopter body and four snap-on parts can be assembled together, and the mini-drill can be used to screw clear bolts into the holes to keep the parts together. The helicopter also comes with decorative stickers that can be used to add personal flair. Once the helicopter is assembled, children can use their imagination to play with it, spinning the blades and pretending to fly.

Educational Insights Design & Drill® Helicopter

This product is a build-and-play toy helicopter that comes with a motorized mini-drill for securing bolts and decorative stickers for customization. The helicopter body and four snap-on parts can be assembled together, and the mini-drill can be used to screw clear bolts into the holes to keep the parts together. The helicopter also comes with decorative stickers that can be used to add personal flair. Once the helicopter is assembled, children can use their imagination to play with it, spinning the blades and pretending to fly.

Start your engines with build ‘n’ play fun from Design &
Drill! First, build the helicopter by snapping the pieces
together. Then, use the motorized mini-drill to secure with
bolts. Finally, add artistic flair with the colorful, decorative
stickers. Once the helicopter is ready to hit the skies,
use kid-power to spin the blades and lift off!
Helicóptero Taladrar y Crear
Hélicoptère Perçage et création
Hubschrauber zum Schrauben und Stecken
•Helicopter body
• 4 Snap-on parts
• 15 Clear bolts
• Decorative stickers
• Motorized mini-drill
• Socket bit
ContEntS
E I - 4 1 3 0
Ages/Años/
Ans/Jahre
3+
4130 Helicopter_Guide.indd 3 10/7/15 4:06 PM
Building the Design & Drill
®
Power Play Vehicle
™
–
Helicopter
Helicóptero Taladrar y Crear
Hélicoptère Perçage et création
Hubschrauber zum Schrauben und Stecken
1
Snap together
the parts
Encaja las piezas.
Encliquetez les pièces
ensemble.
Stecken Sie alle Teile
zusammen.
Getting Started
1. Insert 3 AAA batteries into battery compartment of the mini drill (see
Battery Installation and Instructions in this guide).
2. Help your child snap the bit into the mini-drill.
3. Point out the two positions of the power switch — forward and reverse.
Let your child experiment with the different positions.
4130 Helicopter_Guide.indd 4 10/7/15 4:06 PM
2
Usa la mini taladradora con motor para atornillar los pernos transparentes en los agujeros
del helicóptero. Asegúrate de que las cuatro piezas de encaje se hayan fijado con pernos
para evitar que se pierdan durante el juego.
Utilisez la mini perceuse motorisée pour visser les boulons transparents dans les trous de la
voiture de course. Veillez à fixer les quatre pièces encliquetables avec des boulons pour éviter
de les perdre lors du jeu.
Mit dem batteriebetriebenen Minibohrer werden die transparenten Schrauben in die Löcher
am Hubschrauber geschraubt. Die vier Aufsteckteile müssen mit den Schrauben gesichert
werden, da sie sonst während des Spielens verloren gehen können.
Use the motorized
mini drill to screw
the clear bolts into
the holes of the
helicopter. Make
sure the four snap-
on parts are secured
with bolts to prevent
parts from being lost
during play.
Customize your
vehicle with the
ultra cool stickers!
3
¡Personaliza el vehículo con los adhesivos proporcionados!
Personnalisez votre voiture avec les autocollants fournis!
Anschließend kann der Hubschrauber mit den mitgelieferten Aufklebern verziert werden!
4130 Helicopter_Guide.indd 5 10/7/15 4:06 PM
Battery Installation and Instructions
Drill requires three AAA batteries, not included.
Batteries must be inserted with the correct polarity.
Do not mix old and new batteries.
Do not recharge non-rechargeable batteries.
Do not use rechargeable batteries.
Do not mix different types of batteries: alkaline, standard (carbon
zinc), or rechargeable batteries.
Only use batteries of the same or equivalent type.
Remove exhausted batteries from the unit.
Do not short-circuit the supply terminals.
To prevent corrosion and possible damage to the product, it is
recommended to remove the batteries from the unit if it will not be
used for more than two weeks.
Cleaning instructions: Clean product with a damp or dry cloth —do
not immerse or spray any liquid or water on product.
+
+
-
+
-
-
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
4130 Helicopter_Guide.indd 6 10/7/15 4:06 PM
Page is loading ...
Page is loading ...
Page is loading ...
EI-4131 Race Car
EI-4132 Monster Truck
Make sure to check out the other Power Play
Vehicles for more building, revving fun!
4130 Helicopter_Guide.indd 2 10/7/15 4:06 PM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Educational Insights Design & Drill® Helicopter Product Instructions

Brand
Educational Insights
Model
Design & Drill® Helicopter
Type
Product Instructions
This manual is also suitable for

Educational Insights Design & Drill® Helicopter

This product is a build-and-play toy helicopter that comes with a motorized mini-drill for securing bolts and decorative stickers for customization. The helicopter body and four snap-on parts can be assembled together, and the mini-drill can be used to screw clear bolts into the holes to keep the parts together. The helicopter also comes with decorative stickers that can be used to add personal flair. Once the helicopter is assembled, children can use their imagination to play with it, spinning the blades and pretending to fly.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents