Educational Insights GeoSafari® Jr. Science Utility Vehicle Product Instructions

Type
Product Instructions
Using Your Science Utility Vehicle
Before using for the first time, install 2 AAA batteries as shown
in the diagram on the right side of this page.
To reveal the magnifier, push down on either lever to open the
doors. Focus by turning the spare tire knob on the back of the
truck. To turn on the light, turn the spare tire knob on the front.
Focusing knob
Turn knob right for
white light and turn
knob left for
red light.
Push down on
either lever to
open and reveal
the magniers.
Battery Installation and Information
1. Open the battery compartment door by carefully loosening
the screw with a screwdriver.
2. Install two fresh AAA batteries following the illustration
inside the battery compartment.
•Do not use rechargeable batteries.
•Do not mix old and new batteries.
•Do not mix dierent types of batteries: alkaline, standard
(carbon zinc) or rechargeable (nickel-cadmium) batteries.
•Do not recharge nonrechargeable batteries.
•Remove rechargeable batteries from the toy before
recharging.
•Only charge rechargeable batteries under adult
supervision.
•Only use batteries of the same or equivalent type as
recommended.
•Insert batteries with the correct polarity.
•Remove exhausted batteries from the unit.
•Do not short circuit the supply terminals.
•To prevent corrosion and possible damage to the
product, we recommend removing the batteries from the
unit if it will not be used for more than two weeks.
3. Close the compartment door and tighten the screw.
5094 GeoTruck Guide.indd 2 9/4/14 11:41 AM
  • Page 1 1
  • Page 2 2

Educational Insights GeoSafari® Jr. Science Utility Vehicle Product Instructions

Type
Product Instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI