BDI Margo 5201 User manual

BDI
Brand
BDI
Model
Margo 5201
Type
User manual

BDI Margo 5201

The BDI Margo 5201 is a versatile and stylish shelving unit that is perfect for any home or office. With its clean lines and modern design, the Margo 5201 is sure to complement any décor. The unit is constructed from high-quality materials, including wood veneer, steel, and aluminum, and is built to last.

The Margo 5201 features three adjustable shelves, providing ample storage space for books, DVDs, electronics, and other items. The shelves can be easily adjusted to accommodate items of different sizes, and the unit also includes a sliding door that can be used to conceal the contents of the shelves.

BDI Margo 5201

The BDI Margo 5201 is a versatile and stylish shelving unit that is perfect for any home or office. With its clean lines and modern design, the Margo 5201 is sure to complement any décor. The unit is constructed from high-quality materials, including wood veneer, steel, and aluminum, and is built to last.

The Margo 5201 features three adjustable shelves, providing ample storage space for books, DVDs, electronics, and other items. The shelves can be easily adjusted to accommodate items of different sizes, and the unit also includes a sliding door that can be used to conceal the contents of the shelves.

1
A1 Left Shelf Frame x 1
A2 Right Shelf Frame x 1
C1 Shelf x 3
C2 Cabinet x 1
C3 Door Facia x 1
Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your
BDI products. Register today, and you will be entered to win free a
BINK table from BDI: www.bdiusa.com/register
Placement and Maintenance
Your Margo Shelf is designed for indoor use on level floors.
Clean wood veneer and steel parts with a moist cloth.
Margo is engineered for easy assembly. Carefully follow this procedure to
prevent any damage. Do not use power tools for assembly of this product.
Step 1
This unit ships in 3 cartons (metal frames, cabinet & shelf, and sliding door
front) Unpack all cartons and associated hardware bags. Identify the parts
listed below. The assembly workspace should be a non-marring surface
such as carpet. For missing hardware pieces, contact BDI Customer
Service at: [email protected]. For all other concerns, please
contact your BDI retailer.
bdiusa.com
customerservice@bdiusa.com
Designed by Jeff Bare.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Margo & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2019, BDI
Made in China. 8.06.2019 V7
MARGO
™
5201
Shelf
H1 M6 x 38 mm
Pan Head Screw x 12
H2 M6 x 12 mm
Pan Head Screw x 2
H4 Wall Anchor
Strap x 2
H3 Thumb Screw x 2
Component List
T1 Hex Driver x 1
T3 Leveler wrench x 1
T2 Small Hex wrench x 1
bdiusa.com
customerservic[email protected]
MARGO 5201
Shelf
2
Step 2 - Place the cabinet C2 on the floor with the sliding door track towards the top front edge. Slide the
door frame towards the middle. Orient the door facia C3 as shown with the threaded holes behind the left
side. Position the door facia C3 into the door frame and shift it to the right while holding the left edge of the
door frame to prevent it from sliding. Secure the left side of the door fascia to the door frame with 2 thumb
screws H3 going into the holes on the back of the door frame and screwing them into the threaded holes on
the back of the door facia C3.
Door frame
C3 Door facia
Door track up
here
H3
H3
C2 Cabinet
slide to the right
to lock
bdiusa.com
customerservic[email protected]
MARGO 5201
Shelf
3
Step 3 - Making sure the levelers are facing down, place the left and right shelf frames at least 2' off the
wall (to allow space to tighten screws behind the frames) and exactly 30.5" (780mm) apart from each other as
shown. Use the cardboard template provided.
Step 4 - With help from another person carefully tilt the front edge of a shelf C1 downward 45 degrees and
slide it into the lower square opening of the shelf frame as shown until it is centered. Align the notch with
the front vertical bars of the frames. Rotate the shelf down until it is flat. Repeat this step for the 2 upper
shelves.
2 feet or more
30.5" (780mm)
2 Person Ta sk
C1
A1 Left Shelf Frame
A2 Right Shelf Frame
Align notch with frame Rotate shelf down
until flat
bdiusa.com
customerservic[email protected]
MARGO 5201
Shelf
4
Step 5 - Make sure the cabinet is oriented right side up with door track on top. With help from another person,
carefully slide the cabinet into the opening in the frame and center it so that the 2 holes on top of the cabinet
are directly under the frames. Slide the cabinet all the way back and attach to the frame as shown using 4 pan
head screws H1 and hex driver T1. DO NOT tighten the screws fully yet.
Align the hole
under the frame
Door track
H1 x 8
Step 6 - Attach the backs of the 3 shelves and cabinet to the metal frames as shown using 8 pan head
screws H1 and hex driver T1. Tighten all screws fully now.
H1 x 8
T1
bdiusa.com
customerservic[email protected]
MARGO 5201
Shelf
5
Step 7 - With help from another person, move your Margo shelf next to the wall. Check to make sure your
Margo shelf is parallel to the wall. If it is leaning forward use leveler wrench T3 to turn the levelers under the
front legs in the direction indicated below until the unit is level.
Adjust sliding door if needed - If your sliding door is not hanging evenly, or rubs at the top or bottom, it can
be adjusted up or down by turning one (or both) adjustment wheels inside the cup (located behind each
upper corner of the door). To move the door frame up turn the wheel towards the left. To move the door frame
down, turn the wheel towards the right. Lifting the door frame up with your other hand allows the adjustment
wheel to turn more freely.
2 Person Ta sk
lift here to
reposition the
unit
turning the wheel horizontally
adjusts the door up or down.
adjustment
wheel
T3
Leveler
wrench
lift here while
adjusting the
door
wheel
direction
door direction
bdiusa.com
customerservic[email protected]
MARGO 5201
Shelf
6
3/4"
19mm
Step 8 - Door Stops
Your Margo Console sliding door has 2 green door stops located at each end of the upper aluminum track.
The door stops are preset to allow the door to stop in the correct position. If your door(s) do not stop at the
preset position indicated below, it is likely they may have moved during transit and handling. You will need
to reposition and tighten the door stop using Small Hex Wrench T2. The end of the door stops should be
exactly 19mm (3/4") away from the end of the track.
Edge of green door stop
should be 19mm (3/4") away
from end of track.
Use Small Hex Wrench T2
to tighten door stop in correct
position.
Correct Door Stop
Position
Incorrect Door Stop
Position
Door Stop
T2
bdiusa.com
customerservic[email protected]
MARGO 5201
Shelf
7
Step 9 - Secure your Margo Shelf to the wall using the supplied wall anchor strap H4. Attach the straps to
the tops of the back frames (either one) with pan head screws H2 and hex driver T1. Secure the other end
of the strap to the wall using an appropriate third party insert and screw made for your wall material.
2 Person Ta sk
H2 x 2
H4 Wall anchor
strap x 2
3rd party
wall insert
Attach to either the
inside or outside
frame
bdiusa.com
customerservic[email protected]
MARGO 5201
Shelf
8
User Guide:
Warning!
• For safety, the Margo Shelf MUST be attached to the wall.
• Failure to secure your Margo Shelf to the wall could lead to FATAL INJURY.
• NEVER climb the Margo Shelf.
• If you have small children make sure they NEVER climb the Margo Shelf.
Suggestions:
• Use a step ladder to reach items on the top shelf if needed.
• Place heavier objects on the bottom shelves
• The wall anchor straps should be attached behind the upper shelf.
• Enjoy!
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

BDI Margo 5201 User manual

BDI
Brand
BDI
Model
Margo 5201
Type
User manual

BDI Margo 5201

The BDI Margo 5201 is a versatile and stylish shelving unit that is perfect for any home or office. With its clean lines and modern design, the Margo 5201 is sure to complement any décor. The unit is constructed from high-quality materials, including wood veneer, steel, and aluminum, and is built to last.

The Margo 5201 features three adjustable shelves, providing ample storage space for books, DVDs, electronics, and other items. The shelves can be easily adjusted to accommodate items of different sizes, and the unit also includes a sliding door that can be used to conceal the contents of the shelves.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents