Inspur EIS800 Installation guide

Inspur
Brand
Inspur
Model
EIS800
Type
Installation guide
边缘微服务器Din Rail安装指南
Edge Microserver DIN Rail Installation Guide
将服务器向上提起，向外旋转，使上卡扣与导轨脱开。
Lift up the server and tilt it until the top edge of
the rail disengages with the upper securing tabs
of the bracket.
将服务器向下移动，取下服
务器。
Lower the server to
remove it.
逆时针松开支架固定螺
丝，取下支架。
Loosen the 4 screws
securing the bracket
to the back of the
server anticlockwise
to remove the bracket.
向上提起服务器，同时将服务器向内转动，使上卡扣扣到
导轨上沿。
Lift up the server a little and rotate it toward the
rail so that the top edge of the rail engages with
the upper securing tabs of the bracket.
安装服务器
Installing the Server
拆卸服务器
Removing the Server
安装完成示意图
Installation Completed
B01500D0000000ZY
将服务器移动到安装位置，使卡扣与导轨位置对齐，将服
务器倾斜，使下卡扣扣到导轨下沿。
Tilt the server so that the bottom edge of the DIN
rail engages with the lower securing tabs of the
bracket.
顺时针方向拧紧支架固定螺丝，将支架固定到服务器
背面。
Align the 4 holes on the bracket with those on the
back of the server, install and tighten the screws
clockwise to secure the bracket to the server.
1
3
1
2
3
2
边缘微服务器Din Rail安装指南
Edge Microserver DIN Rail Installation Guide
向上提起服务器，同时将服务器向内转动，使上卡扣扣到
导轨上沿。
Lift up the server a little and rotate it toward the
rail so that the top edge of the rail engages with
the upper securing tabs of the bracket.
安装服务器
Installing the Server
拆卸服务器
Removing the Server
3
  • Page 1 1
  • Page 2 2

Inspur EIS800 Installation guide

Inspur
Brand
Inspur
Model
EIS800
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents