2. Baxton Studio
  3. BBT5372-Grey/Walnut-BS

Baxton Studio BBT5372-Grey/Walnut-BS, BBT5372-Light Grey Velvet/Wenge-BS Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the BBT5372 - BS chair. This document provides a step-by-step guide for assembling the chair, along with parts and hardware lists. It also includes cautions to ensure proper assembly. I'm here to answer any questions you might have regarding these instructions, including the specific steps or hardware involved.
  • Should I fully tighten the nuts or bolts at the start of assembly?
    What tool is needed for assembly?
    What should I do to avoid damaging the threads?
HARDWARE LIST
ITEM DESCRIPTION QTY
1 JCBC Bolt M6 x 50mm 8 PCS
2 JCBC Bolt M6 x 40mm 4 PCS
3 M6 FLAT WASHER 12 PCS
4 M6 SPRING WASHER 12 PCS
5 WOOD SCREW M4 x 38mm 8 PCS
6 M4 ALLEN KEY (BALL SHAPE) 1 PC
B
A
6
2
4
3
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver (not provided).
ASSEMBLY INSTRUCTIONS
PART LIST
ITEM DESCRIPTION QTY
A CHAIR 1PC
B CHAIR FRAME 1 PC
C LEG 4 PCS
D SIDE RAIL 4 PCS
MODEL : BBT5372 - BS
STEP 1 STEP 2
1 OF 2
STEP 2.1
STEP 2.2
Don't screw tied
5
3
41
6
CC
D
STEP 3.2
Don't screw tied
**Finish step 4,
Please screw tied the
step 2 & 3 bolt.
5
3
41
6
CC
D
D D
D
5
ASSEMBLY INSTRUCTIONS 2 OF 2
STEP 3
STEP 4
STEP 5
STEP 3.
/