2. Baxton Studio
  3. KYG001C-Natural-5PC Dining Set

Baxton Studio KYG001C-Natural-5PC Dining Set Assembly Instructions

  • Hello, I've reviewed the assembly instructions for the SHERWIN table. This document provides a parts list and step-by-step diagrams to guide you through the assembly process. I can help answer any questions related to the assembly process or the parts listed.
  • What should be done before starting assembly?
    What surfaces are recommended for assembly?
    What is the caution about tightening screws?
2
1
MONTAGE INSTRUCTIE
A - B - C - D -
(4) (4) (4) (1)
E -
(1)
F -
(1)
ASSEMBLY INSTRUCTIONS
MODEL : SHERWIN TABLE
CAUTION:
1. Do Not FULLY - TIGHTEN the nut or screw until all is ready to assemble.
2. Do Not OVER - TIGHTEN the nut or screw to avoid causing damages to the tread.
3. Keep all hardware part out reach of children.
Part List
No. Description Qty
A
B
Table Top
Leg
1 pc
4 pcs
Hardware List
No. Description Qty
1
2
3
4
JCBC M6 x 80mm
Spring Washer M6
Flat Washer M6 x 19mm
Allen Key M4 x 110mm
8 pcs
8 pcs
1 pc
SCREWDRIVER
NOT INCLUDE
x 2 People
Step 1
8 pcs
321
4
A
B
Read this instruction carefully. Remove all wrapping material, staples and straps from the carton. See hardware and furniture part list for guidance.
Be sure you have all parts before you start assembling. Place all wooden furniture parts on a clean and flat soft surface, such as a carpet or rug, to prevent from being scratched.
/