Beta 1464PT Operating instructions

Hello! I am an AI chatbot trained to assist you with the Beta 1464PT Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

TURBO PRESSURE MEASUREMENT

Tomeasureturbopressure,followthesesteps.

• Place the needle into the sensor tip.

•Pricktheneedleintotheturbotube.Ifpossible,youshouldplacetheneedleonthepipe

betweentheintercoolerandtheengineintake.Itisconvenienttopuncturethetubeobliquely,

andnotperpendicularly.

•Ifnecessary,xthesensorwithaclamp,topreventitfrommovingduringthetest.

•Placethetesterinsidethevehicle,takingcarenottodamagethesensorcablewiththehood

or door frame.

•Formaximumturbopressure,itisnecessarytodrivethevehicle.Thetesterautomatically

storesthemaximumvalue,sothatonepersoncanperformthetest.Theusercanpressthe

“MaxReset”buttontoresetthememory.Agraphicalviewhasalsobeenintegratedintothe

samescreen.Thegraphicalviewcanbepausedbypressingthe“PAUSE”button.

•Comparethevaluesobtainedwiththevaluesprovidedbythevehiclemanufacturer.

ISTRUZIONI PER L’USO

INSTRUCTIONS FOR USE

BETA UTENSILI S.p.A.

viaAlessandroVolta,18-20845Sovico(MB)ITALY

Tel. +39 039.2077.1 - Fax +39 039.2010742