ENIGMA 2 (Ariva ATV Combo)

To run Enigma2, you must:

1) format the pendrive to FAT32

2) Download and unpack the archive onto the pendrive from the website:

http://images.mynonpublic.com/openatv/current/index.php?open=arivacombo

- three les from the archive must be found on the USB disk in the e2/update folder

3) in the livetv application you should enable the ability to use Enigma2 (Setup -> Misc -> Preference -> Use E2: [Enable])

4) Insert the pendrive into Ariva and click the GREEN button on the remote control when starting the Ariva.

5) after the system selection board appears, press the BLUE button on the remote control.

3) in the livetv application you should enable the ability to use Enigma2 (Setup -> Misc -> Preference -> Use E2: [Enable])

4) Insert the pendrive into Ariva and click the GREEN button on the remote control when starting the Ariva.

5) after the system selection board appears, press the BLUE button on the remote control.