The Art of Storage RS5103 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the The Art of Storage RS5103 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
PABLO RS5103
ASSEMBLY DIAGRAM
©
Copyright 2011
Delta Design Company
125 Washington St. Unit #7
Foxborough, MA 02035 USA
1
1. Locate Stud beneath wallboard.
2. Position Shelf at desired height and
screw into place.
(screws should be in center of Wall Stud)
NOTE: Make sure the Shelf is level when mounting.
Solid Wall
5/16" Hole
(7MM)
Plastic Expander is
inserted into wall
Supplied Screw
Solid Wall Installation
Mark Mounting Points accurately
on wall BEFORE drilliing any holes.
Wallboard
Stud
2
3
NOTE: Make sure the bracket is sucurely
placed in cradle.
DO NOT EXCEED MAXIMUM
TOTAL WEIGHT LIMIT OF
65 LBS (30 Kgs)
IMPORTANT WARNINGS:
Incorrect wall mounting
could result in items
falling and injury to persons.
/