6
O S R A M
NW-BL75063
Installation Instruction
Please turn off power and read this instruction
before installation, changing the bulb or cleaning
the fixture. The installation must be handled by a
qualified electrician with license.
A: Use screws (4) to fix the pegboard (2) to the
press wire box.
B: Link the lamp body power cord (1) to the
external power cord with a terminal cap.
C: Fix the lamp body (5) to the pegboard (2) with
screws (3).
D: Use the ring (8) to fix the lamp shade (7) to the
lamp head (6).
E: Install the bulb (Not Included) (9 to the lamp
head (6) at the recommended wattage.
F: Check if the installation is complete, then turn
on the power.
