Smart-AVI SmartCommander User manual

Smart-AVI
Brand
Smart-AVI
Model
SmartCommander
Type
User manual

Smart-AVI SmartCommander

Smart-AVI SmartCommander is a remote control system for SmartAVI RS-232 compliant matrix switches. The system consists of a SmartCommander Hub and one or more SmartCommander Switches. The SmartCommander Hub connects to the matrix switch via an RS-232 serial cable, and the SmartCommander Switches connect to the SmartCommander Hub via CAT5 cables. Each SmartCommander Switch has a number of buttons that can be used to select the desired input port on the matrix switch.

The SmartCommander system can be used to control any SmartAVI RS-232 compliant matrix switch. This includes the following models:

Smart-AVI SmartCommander

Smart-AVI SmartCommander is a remote control system for SmartAVI RS-232 compliant matrix switches. The system consists of a SmartCommander Hub and one or more SmartCommander Switches. The SmartCommander Hub connects to the matrix switch via an RS-232 serial cable, and the SmartCommander Switches connect to the SmartCommander Hub via CAT5 cables. Each SmartCommander Switch has a number of buttons that can be used to select the desired input port on the matrix switch.

The SmartCommander system can be used to control any SmartAVI RS-232 compliant matrix switch. This includes the following models:

www.smartavi.com
Installation
Manual
SmartCommander System
SmartCommander Switch
SmartCommander Hub
Control SmartAVI RS-232 Compliant Switches Remotely
2
www.smartavi.com
RS-232
CONTROL
RS-232
RS-232
CONTROL
DVI-D
Matrix Switch
SmartCommander Hub
DVI Displays
SmartCommander
Switches
CAT5
Features
• Control any SmartAVI RS-232
Compliant Matrix Switch
• Local Master Control to Override Remotes
• Compatible With all Major KVM Switches
• Supports Mac, PC, and Linux
• Rack Mountable Solution
• Plug-and-play
3
www.smartavi.com
RS-232
CONTROL
RS-232
RS-232
CONTROL
DVI-D
Matrix Switch
SmartCommander Hub
DVI Displays
SmartCommander
Switches
CAT5
Introduction
The SmartCommander system brings the control of a matrix switch to remote workstations,
eliminating the need to control the switch locally. Each workstation is equipped with a simple switch
panel, allowing the user to select the desired output with the press of a button. The system also
allows for a master to control the switching functions, overriding the remote control if necessary. The
SmartCommander system can be used with any of SmartAVI’s RS-232 compliant matrix switches.
Installation
1. Turn o the Matrix Switch, computers and displays.
2. Connect the computers to the Matrix Switch using DVI cables.
3. Connect the Matrix Switch to the displays using DVI cables.
4. Connect the SmartCommander Hub to the Matrix Switch using an RS-232 serial cable.
5. Connect the SmartCommander Hub to the SmartCommander Switches using CAT5 cables.
6. Connect the power supply to the SmartCommander Hub and SmartCommander Switch.
7. Power on the displays, Matrix Switch and computers.
8. Use the front panel buttons on the SmartCommander Switch to select the desired input port.
9. Use an RS-232 serial connection to select the desired input port.
www.smartavi.com
© Copyright 2011 Smart-AVI, All Rights Reserved
NOTICE
The information contained in this document is subject to
change without notice. Smart-AVI makes no warranty of any
kind with regard to this material, including but not limited
to, implied warranties of merchantability and tness for any
particular purpose.
Smart-AVI will not be liable for errors contained herein or for
incidental or consequential damages in connection with the
furnishing, performance or use of this material.
No part of this document may be photocopied, reproduced or
translated into another language without prior written consent
from Smart-AVI.
For more information, visit www.smartavi.com.
SmartAVI, Inc. / Twitter: smartavi
11651 Vanowen St. North Hollywood, CA 91605
Tel: (818) 503-6200 Fax: (818) 503-6208
http://www.SmartAVI.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Smart-AVI SmartCommander User manual

Smart-AVI
Brand
Smart-AVI
Model
SmartCommander
Type
User manual

Smart-AVI SmartCommander

Smart-AVI SmartCommander is a remote control system for SmartAVI RS-232 compliant matrix switches. The system consists of a SmartCommander Hub and one or more SmartCommander Switches. The SmartCommander Hub connects to the matrix switch via an RS-232 serial cable, and the SmartCommander Switches connect to the SmartCommander Hub via CAT5 cables. Each SmartCommander Switch has a number of buttons that can be used to select the desired input port on the matrix switch.

The SmartCommander system can be used to control any SmartAVI RS-232 compliant matrix switch. This includes the following models:

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers