2. Ridetech
  3. 11379400

Ridetech 11379400 Operating instructions

  • Hello! I've reviewed the installation instructions for the ridetech Tie Rod Adjuster, specifically for the 1988-1998 GM C1500 model. This document highlights important aspects like thread engagement and the identification of the left-hand threaded side. I am ready to address any questions you might have about the installation process or features of this product.
  • What is the purpose of this Tie Rod Adjuster?
    How do I identify the left-hand threaded side?
    What should I use on the threads during installation?
    How much thread engagement should I ensure?
    How can I verify proper thread engagement?
1812-482-2932
Installation
Instructions
Recommended Tools
www.ridetech.com
Part # 11379400 - 1988-1998 GM C1500 Tie Rod Adjuster
Major Components .....In the box
QTY Part Number Description
2 90000092 Tie Rod Adjuster
2 99800000 11/16”-16 Right Hand Jam Nut
2 99800001 11/16”-16 Left Hand Jam Nut
NOTES:
This Tie Rod Adjuster is designed to take place of the OEM steel sleeve.
One end of the adjuster has a groove cut in it, this is the LEFT HAND threaded side.
When installing the Tie Rod Adjuster, use antisieze compound on the threads.
FOR YOUR SAFETY, THE TIE RODS NEED A MINIMUM 1 1/32” OF THREAD ENGAGEMENT INTO THE
TIE ROD ADJUSTER. USE THE SIGHT HOLE IN THE SIDE OF THE TIE ROD ADJUSTER TO ENSURE
PROPER THREAD ENGAGEMENT.
REV2 5/15/23
/