CAME PSAC102A Installation guide

Brand: CAME

Model: PSAC102A

Category: IP phones

Type: Installation guide

001PSAC102A

Installation and conguration manual

English

119GJ14EN

Page 2 - Manual code: 119GJ14EN ver. 1 10/2014 © CAME Cancelli Automatici s.p.a. - The data and information provided in this manual are subject to change at any time without prior notice.

Page 3- Manual code: 119GJ14EN ver. 1 10/2014 © CAME Cancelli Automatici s.p.a. - The data and information provided in this manual are subject to change at any time without prior notice.

Telephone

stand

Receiver

socket

12V power supply socketLAN port

PC Port

Installing

Package contents

Main body, receiver, telephone cord, power supply unit, Ethernet cable, telephone stand, installation and conguration manual.

Connecting the phone

1. Fit the stand into the groove on the back of

the phone. You can t the parts from two

dierent angles.

2. Connect the receiver to the phone using the

supplied cord.

3. Connect the phone's LAN port to a hub /

switch RJ-45 socket or a router (router's

LAN side) using the Ethernet cable.

4. Connect the 12 V DC power supply unit's

plug to the phone's power supply socket;

connect the power supply unit's plug to an

electrical socket.

If the phone is connected to a PoE switch,

the phone need not be connected to the

power supply unit.

5. The LCD display will show the starting

screen view. Before continuing, wait to

view the main screen view.

General warnings

•Carefully read the instructions before staring installation and performing any procedures as explained by the manufacturer,

•Installing, programming, commissioning and maintenance of the product must be only done by skilled technical staff,

•The installer must make sure that all user information, where required, must be present and delivered,

•Before doing any cleaning or maintenance jobs, cut off the power supply to the devices,

•The devices must be used only for the purpose for which they were expressly designed,

•Do not use power supply units other than those included in the package,

•The manufacturer may not, in any way, be liable for any damage deriving from improper, wrongful or unreasonable use.

DISPOSAL

Make sure the packing material is not disposed of in nature, but disposed of according to the laws in effect in the country where

the product is being used. At the end of the product's life-cycle, make sure it is not disposed of in nature. Its disposal must follow

the laws in effect and also follow recycling directives as concerns its component parts. The component parts that must be recycled

bear a symbol showing what type of material they are made of.

CE Declaration - CAME S.p.A., declares that this device conforms to the provisions of directive 2014/30/UE. An original copy is

available on request.

❶

❷

Page 2 - Manual code: 119GJ14EN ver. 1 10/2014 © CAME Cancelli Automatici s.p.a. - The data and information provided in this manual are subject to change at any time without prior notice.

Page 3 - Manual code: 119GJ14EN ver. 1 10/2014 © CAME Cancelli Automatici s.p.a. - The data and information provided in this manual are subject to change at any time without prior notice.

Conguring the telephone

01. There is no DHCP server

Note: with a DHCP server go to chapter 02.

Assign an IP address to the telephone via the touch

screen display

Once the phone is powered on, on the main screen, touch the

❶ key and then, sequentially, the icons shown by the numbers

of the following screen views.

Memory 001PSAC102A

Network interface

Dual switched

10/100/1000Mbps ports

with integrated PoE

Display Type TFT LCD capacitive

display, 480 x 272

Power supply

From power supply unit

or via built-in Power-o-

ver-Ethernet (802.3af,

class 0)

Maximum consumption (W)

Dimensions (mm)

188 x 210 x 85

Weight (Kg)

0.86

Operating temperature (°C)

0 ÷ 40

Stocking temperature (°C) -10 ÷ 60

Maximum relative working humi-

dity without condensation (%)

10 ÷ 90

Type

Power supply unit

Input (V AC)

100-240 (50-60Hz)

Output (V DC) 12, 1.5A

Protocols and standards

SIP RFC3261, TCP/IP/UDP, RTP/RTCP, HTTP/HTTPS, ARP, ICMP,

DNS (A record, SRV, NAPTR), DHCP, PPPoE, SSH, TFTP, NTP, STUN,

SIMPLE, LLDP, LDAP, TR-069, 802.1x, TLS, SRTP

Compliance

FCC Part 15 (CFR 47) Class B; EN55022 Class B, EN55024,

EN61000-3-2, EN61000-3-3, EN60950-1; AS/NZS CISPR 22

Class B, AS/NZS CISPR 24, RoHS; UL 60950 (power supply unit)

Voice Codec

Support for G.711u/a, G.722 (wide-band), G.729A/B in-band

and out-of-band DTMF (in audio, RFC2833, SIP INFO)

Audio Codec

AAC, MP3, WMA, Real, Ogg-Vortis, FLAC

Video Decoder

H.264 BP/MP/HP, H.263/H.263+, MPEG4, resolution up to

1080p

Technical characteristics

❸

❹

❺

❻

Page 4 - Manual code: 119GJ14EN ver. 1 10/2014 © CAME Cancelli Automatici s.p.a. - The data and information provided in this manual are subject to change at any time without prior notice.

Page 5 - Manual code: 119GJ14EN ver. 1 10/2014 © CAME Cancelli Automatici s.p.a. - The data and information provided in this manual are subject to change at any time without prior notice.

Touch the screen where it says “Address Type”.

Select the “Static IP” option.

Enter the right parameters provided by the network

administrator.

Scroll to the bottom by dragging your nger up and down the

screen and press the “Save” key ❻, now reboot the telephone.

02. A DHCP server is present

Conguring the IP address via browser, when the IP

address is already congured or assigned to a DHCP

server

If the device is connected to a local network where a DHCP

server is active, the phone is automatically assigned a valid IP

address; The address is viewable in the phone's main screen.

Page 4 - Manual code: 119GJ14EN ver. 1 10/2014 © CAME Cancelli Automatici s.p.a. - The data and information provided in this manual are subject to change at any time without prior notice.

Page 5 - Manual code: 119GJ14EN ver. 1 10/2014 © CAME Cancelli Automatici s.p.a. - The data and information provided in this manual are subject to change at any time without prior notice.

By entering the assigned address on any browser installed on

an internet-linked PC, you can directly access the telephone's

conguration interface.

The default access credentials are:

Username: admin

Password: admin

Select “Maintenance”.

Activate the “Static IP” item.

Enter the right parameters

provided by the network

administrator.

After entering all of the

required parameters press

“Save” at the bottom of the

page.

Reboot the telephone and

apply the set parameters.

Upgrading the telephone's rmware

The upgrade is necessary

for better managing video

calls and to support call

recordings.

Access the web interface at

the address you set in the

previous point.

In the “Status” window,

“System Info”, check the

rmware version at “System

Version”.

Page 6 - Manual code: 119GJ14EN ver. 1 10/2014 © CAME Cancelli Automatici s.p.a. - The data and information provided in this manual are subject to change at any time without prior notice.

Page 7 - Manual code: 119GJ14EN ver. 1 10/2014 © CAME Cancelli Automatici s.p.a. - The data and information provided in this manual are subject to change at any time without prior notice.

If the rmware version

uploaded on your phone is

previous to the 1.0.3.26 one,

you will need to upgrade it:

Connect to the phone's

webpage.

Select “Maintenance” and

the “Upgrade” menu.

Change the item “Upgrade

Via” t o “ Manual Upload” and

then press “Upload”, which

will appear just below.

Select the upgrade le and

wait for the procedure to end.

At the end of the upgrade the

phone will reboot itself.

Warning!:

Do not turn oﬀ the device

while the system is

launching or while the

ﬁrmware upgrade is taking

place.

Conguring Account and SIP parameters

Enter the phone's conguration panel and set

the following parameters:

Select

“Account 1” and in the “General Settings”

section enter the following parameters

“Account Active”: Yes

“Account Name”: Assistance (or other name

you choose)

“SIP Server”: system's main server address

“SIP User ID”: 100

“SIP Authentication ID”: 100

Page 6 - Manual code: 119GJ14EN ver. 1 10/2014 © CAME Cancelli Automatici s.p.a. - The data and information provided in this manual are subject to change at any time without prior notice.

Page 7 - Manual code: 119GJ14EN ver. 1 10/2014 © CAME Cancelli Automatici s.p.a. - The data and information provided in this manual are subject to change at any time without prior notice.

In the “SIP Settings” section enter the

following

parameters “SIP Registration”: Yes

“Local SIP Port”: 5060

“SIP Transport”: TCP

In the “Codec Settings”

section, enter the following

parameters

”DTMF”: SIP INFO

”Preferred Vocoder”: Move

all items from the left box to

the right using the arrows

CAME Cancelli Automatici S.p.a.

Via Martiri Della Libertà, 15

31030 Dosson Di Casier (Tv)

(+39) 0422 4940

(+39) 0422 4941

Assistenza Tecnica/Numero Verde 800 295830

Page 8 - Manual code: 119GJ14EN ver. 1 10/2014 © CAME Cancelli Automatici s.p.a. - The data and information provided in this manual are subject to change at any time without prior notice.