Lindy 2D & 1D Barcode Scanner, USB User manual

Lindy
Brand
Lindy
Model
2D & 1D Barcode Scanner, USB
Category
Convenience lighting
Type
User manual
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (August 2015)
2D & 1D Barcode Scanner, USB
User Manual English
Benutzerhandbuch Deutsch
Manuel utilisateur Français
Manuale Italiano
No. 20770
www.lindy.com
Tested to Comply with
FCC Standards
For Home and Office Use!
Page is loading ...
User Manual English
Introduction
Thank you for buying the LINDY 2D & 1D Barcode Scanner, USB. As well as decoding 2D and 1D
barcodes, this Scanner is capable of omni-directional reading. This allows for fast reading of barcodes at
any angle, making it a perfect solution for POS installations.
Package Contents
• 2D & 1D Barcode Scanner, USB
• USB cable
• Stand
• CD with software and manual
• This Quick Guide
Features
• Auto scan function
• Reads 2D and 1D barcodes
• CMOS sensor, 1280 x 960 pixels
• LED light source
• Decoding rate: 100 times per second (+/- 10)
• Precision > 3mil
• Depth of field: 3.5mil Code 128: 15-35mm, 5mil Code 39: 8-55mm, 13mil UPC: 7-165mm, 20mil
Code 39: 35-210mm, 6.7mil PDF417: 0-75mm, 10mil DM: 0-115mm, 20mil QR: 0-195mm
• Indicators: Beeper, LED
Installation & Operation.
Switch off the host, then connect the host with the Scanner (see below).
To remove the cable, insert a thin object into the cable release-hole and press down. Gently pull the
cable away from the base of the scanner handle.
1. LED
2. Emitter Window
3. Trigger
4. Cable interface port
5. Cable release-hole
6. Beeper
User Manual English
Programming instruction
Use the Single-scan setting for quick and easy settings.
Multiple-scan setting allows more detailed settings.
Reading techniques
In handheld mode, pressing and holding the trigger projects an aiming beam onto the object to
Align this with the centre of the barcode.
On a successful scan, the Scanner will beep. The illumination and aiming patterns will fade out.
The optimal reading range is limited to 5-7cm regardless of the size of the minimal element of the
barcode.
Auto-detection scanning mode
The Auto-detection scanning mode has two operating modes: In-stand and Always-On.
The following is an introduction to In-stand Auto-detection mode.
1. When in the stand, the Scanner operates in Auto-detection mode.
2. To scan a barcode, present the barcode in front of the Scanner, ensuring the aiming pattern
covers the barcode.
3. The Scanner will beep and the indicator LED will light up, after a successful scan.
4. Moving the barcode away for the Scanner will activate the next scan.
For further details, please refer to the manual on the enclosed CD.
To return default parameters and version information for the Scanner, scan the barcodes below.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
CE/FCC Statement
CE Certification
This equipment complies with the requirements relating to Electromagnetic Compatibility Standards
EN55022/EN55024 and the further standards cited therein. It must be used with shielded cables only.
It has been manufactured under the scope of RoHS compliance.
CE Konformitätserklärung
Dieses Produkt entspricht den einschlägigen EMV Richtlinien der EU für IT-Equipment und darf nur
zusammen mit abgeschirmten Kabeln verwendet werden.
Diese Geräte wurden unter Berücksichtigung der RoHS Vorgaben hergestellt.
Die formelle Konformitätserklärung können wir Ihnen auf Anforderung zur Verfügung stellen
FCC Certification
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
You are cautioned that changes or modification not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
LINDY Herstellergarantie – Hinweis für Kunden in Deutschland
LINDY gewährt für dieses Produkt über die gesetzliche Regelung in Deutschland hinaus eine zweijährige
Herstellergarantie ab Kaufdatum. Die detaillierten Bedingungen dieser Garantie finden Sie auf der LINDY Website
aufgelistet bei den AGBs.
Hersteller / Manufacturer (EU):
LINDY Electronics Ltd.
LINDY-Elektronik GmbH Sadler Forster Way
Markircher Str. 20 Teesside Industrial Estate, Thornaby
68229 Mannheim Stockton-on-Tees, TS17 9JY
GERMANY United Kingdom
Email: info@lindy.com , T: 0049 (0)621 470050 postm[email protected] , T: +44 (0) 1642 754000
Recycling Information
WEEE (Waste of Electrical and Electronic Equipment),
Recycling of Electronic Products
Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical
and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment.
Instead, these products must enter the recycling process.
Each individual EU member state has implemented the WEEE regulations into national law in slightly different
ways. Please follow your national law when you want to dispose of any electrical or electronic products. More
details can be obtained from your national WEEE recycling agency.
Germany / Deutschland
Die Europäische Union hat mit der WEEE Direktive Regelungen für die Verschrottung und das Recycling von
Elektro- und Elektronikprodukten geschaffen. Diese wurden im Elektro- und Elektronikgerätegesetz – ElektroG in
deutsches Recht umgesetzt. Dieses Gesetz verbietet das Entsorgen von entsprechenden, auch alten, Elektro- und
Elektronikgeräten über die Hausmülltonne! Diese Geräte müssen den lokalen Sammelsystemen bzw. örtlichen
Sammelstellen zugeführt werden! Dort werden sie kostenlos entgegen genommen. Die Kosten für den weiteren
Recyclingprozess übernimmt die Gesamtheit der Gerätehersteller.
France
En 2006, l'union Européenne a introduit la nouvelle réglementation (DEEE) pour le recyclage de tout équipement
électrique et électronique.
Chaque Etat membre de l’ Union Européenne a mis en application la nouvelle réglementation DEEE de manières
légèrement différentes. Veuillez suivre le décret d’application correspondant à l’élimination des déchets électriques
ou électroniques de votre pays.
Italy
Nel 2006 l’unione europea ha introdotto regolamentazioni (WEEE) per la raccolta e il riciclo di apparecchi elettrici
ed elettronici. Non è più consentito semplicemente gettare queste apparecchiature, devono essere riciclate. Ogni
stato membro dell’ EU ha tramutato le direttive WEEE in leggi statali in varie misure. Fare riferimento alle leggi del
proprio Stato quando si dispone di un apparecchio elettrico o elettronico.
Per ulteriori dettagli fare riferimento alla direttiva WEEE sul riciclaggio del proprio Stato.
1
st
Edition, August 2015
www.lindy.com
Tested to Comply with
FCC Standards
For Home and
Office Use!
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Lindy 2D & 1D Barcode Scanner, USB User manual

Lindy
Brand
Lindy
Model
2D & 1D Barcode Scanner, USB
Category
Convenience lighting
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents