Connect the USB uplink cable (A) or
FireWire 400 uplink cable (B) to the
Hub. Connect the other end of the
uplink cable to your computer.
NOTE: If you don’t have a FireWire 400
port on your computer and you only plug
the USB 2.0 uplink cable into your
computer, your Hub’s FireWire 400 ports
will be disabled.
Make sure there are available Hi-Speed USB 2.0 and/or FireWire 400
ports on your computer and that the computer is turned on.
Disengage your Hub’s top cover by
twisting it to the left. Remove the cover.
1
2
3
WHITE
VIOLET
GREEN
RED
YELLOW
ORANGE
BLUE
PINK
TO DEVICE
TO COMPUTER
A
B
USB A
MALE
USB B
MALE
USB A
FEMALE
MINI USB
MALE
FIREWIRE
6-PIN MALE
FIREWIRE
6-PIN FEMALE
FIREWIRE
4-PIN MALE
POWER SUPPLY PORT
WHITE
VIOLET
GREEN
RED
YELLOW
ORANGE
BLUE
PINK
TO DEVICE
TO COMPUTER
A
B
USB A
MALE
USB B
MALE
USB A
FEMALE
MINI USB
MALE
FIREWIRE
6-PIN MALE
FIREWIRE
6-PIN FEMALE
FIREWIRE
4-PIN MALE
POWER SUPPLY PORT