Craftsman 351223070 Owner's manual

Brand: Craftsman

Model: 351223070

Category: Lathes

Type: Owner's manual

This manual is also suitable for

351.223070

Operator's Manual

I[RRFTSMRN'I

WOOD LATHE STAND

Model No.

351.223070

CAUTION: Read and follow

all Safety Rules and Operating

Instructions before First Use

of this Product.

• Safety

• Assembly

• Parts Ust

• Espaffol

Sears, Roebuck and Co,, Hoffman Estates, IL 60179 U.S.A.

www+ u ars, comlQ-an 8malt

24134,00 Draft (1_03/05)

Warranty....................... 2 Assembly..................... 3-5

Safety Rules.................... 2 Parts List ...................... 5

Uepacking.................... 2-3 Espa_ol...................... 6.9

FULL ONE YEAR WARRANTY

If this productfails due to a defect in matedal orworkmanshipwithinone year from

the date d purchase, Sears will at its option repair or replace itfree af charge.

Contactyour neareef Sears Service Center (1-800-4.-MY-HOME) to arrange for

productrepair,or returnthis productto place ol purchase forrapl_ment,

This warranty appliesonlywhb this productis usedin the United States,

This warranty gives you epeclle legal rightsand you may also have otherrights

whichvary from state to state.

Sears, Roebuck and Co., Dept. 817WA, Hoffman Estate_ IL 60179

• Read and understandmanualsand

otherinstructionspro/ided.

• Use only _csessohes designed for

stand or lathe.

• Maks sure lathe and accessories

are securely damped.

• AIwws check your set up.For e_arn-

pie, rotate accessory by hand before

applying power,

• Keepyour mindon your work.Be

ated.

• Dress properly.Do not wear jewelry,

gloves or looseclothing,

• Wear a face shie_ or satetyglasses,

• Never placehands in jeopardy.

Check forshippingdamage. If damage

has occurred,a claim mustbe fliedwith

the carrierfor fastest action.Check for

completeness.Locate all partsbefore

attempting assembly {referto Figure 1).

CAUTION: Do not attempt assemblyi

parts _ missing.Follow assan'_ly

instructions,Use parts listto order

replacement parts.

1 Top, (2)

2 Shell

3 Leg "A"(2)

4 Short Brace (2)

5 Long Brace (2)

6 ToolHolder

7 Leg "_'

8 Leg "C"

Hardware Bag (not shown) includes:

• M8x 16Carriage Boll (24)

• M8 Flat Washer (32)

• M8 Hex Nut (28)

• M4 x 12 Pan Head Screw (3)

• M4 FlatWasher (3)

• M4 Flex Nut (3)

• M8 x 35 Hex Heed Bolt(4)

@Sears,RoebuckandCo,

Figure1. Unpaddnll

Rater to Figures1-8,

DESCRIPTION

SearsWood LatheStand is designedto

accommodateSears 15"Wood Lathe,

Model Number__21750.The standfea-

turassturdysteel constructionandfbar

board shelf,Fastenersare providedfor

securinglatheto stand,She| is provided

for e=drastability and aco_sary storage,

Before stand is assembled,a suitable

locationshouldbe chosen.The lathe

and stand weigh appro=(imatsly225 bs.

when completelyassembled.They

shouldbe assembledon Iocatiee.

• Lathestandneeds to be set on a

fist, levelsurface,

• Good lightingand correctpower

supplyare also requiredfors proper

workarea,

LEG SET ASSEMBLY

NOTE: Finger tightenbolts and nuts

untilassemblyd stand isconlplate and

lathe ispositionedonstand.Then tight-

en allfastenerssecurely,

Assemble the hesd_od( side W_Jset:

• Place oee ofthe legs marksd'A' on

floor.

• Pce_ieetop insidelegsothat slots

are alignedas indicatedin Figure2,

• Attachtop to leg at stcts usingthree

8-1.25 x 16rnm carriagebolts,8rnm

fist washers and 8,125ram hex nuts.

Rgure 2 -AttachTopto Leg'A'

• Place shod brace inside legand

attachusinghardwarespecified

above.Note that flange is located

towardsthetop,

Rguro 3 -Asmmble Shah Brace to leg

• Positionleg 'B"outsidethe top and

shod brace. Attach as indicatedin

Figure 4 usingfour bolts, washers

and nuts.

Rgure 4 - AttsehLeg"B'to Auembiy

• Set assemblyadde,

• Asserrble taltstockside leg setin

thesalnemanner asabove,

ATTACHING LONG BRACES TO

LEG SETS

• Place leg sets on floorupsidedown

apprcz,dmately 40" apart as shown in

Figure5.

Rgure S- PositionLegAssemblies

,, Positionlongbrace inside the legs

and attach as indicatedin Figure6

usingfourbolts, washers and nuts.

Notethat flangeis locatedtoward

thetop.

• Turnatandrights'tdeup_¢_dposit'K_

atdesiredworklocation,

MOUNT WOOD LATHE

CAUTION; The wood lathe weighs

175 Ibs,Twopeople willbe requiredto

set lathe onstand.

• Carefully set latheon stand. Align

holesin lathebed to slotsintop of

stand as shown in Figure7.Attach

lathe to stand usingtour 8-1.25 x

35mm has head bolts,eight 8mm

flatwashers, four 8ram _ washers

trod(_J_8rrcnhe_ nuts.Oo not

tighten fasteners _mpletely,

F_m'_7 - Mounting_tots _ Lsthe

Make sure stand setsfiat on floor.

Adjust legs i' needed.Tighten all

stand [astenarssecurely,

• Securely tightenlathe mountingfaS-

teners,

ATTACH TOOL HOLDER

• Attach toolholder torightfront leg

usingthree 4-0.7 x 12ram pan head

screws,4ram flat washers and 4rnm

he=(nuts.

Figure 6 - AtJach I.on

• Attech remaining long brace in the

Sa_ manner as abcv_

INSTALL SHELF

• Slide shelfbetween the legs, turn it

fiat andset ontothe braces,

Rgum 9 - Repl_menl Pads Illualration for L_he 8lind

KJEY

NO. PARr NO.

1 24137.00

2 24138.00

3 24139.00

4 24140.00

5 24141.00

6 24142.00

7 24143.00

8 24144.00

9 08624.00

10 STD851008

11 STD840812 ,

12 8TD863412

13 STDB51004.

14 STDB40407

15 STD835035

16 STDB52008

A 24145,00

A 24134.00

• Standard hardware

,*, Not Shown

DESCRIPTION QTY.

Top 2

LegA 2

Short Brace 2

Legs 1

LongBrace 2

Shelf 1

LegC 1

Tool Holder 1

8-1.25 x 16rnrn Carriage Bolt 24

8mm Rat Washer" 32

8-1.25ram H_ Nut" 28

4-0.7 x 12ramPan Head Scre_° 3

4rnmFiat Washer* 3

4-0.7mm He_ Nut" 3

8-1.25 x 35ram Hex Head Bolt" 4

8rnmLockWasher* 4

Hardware Bag (incl.K6y Nos.9-16) 1

Operator'sManual 1

itemavailablelocally.

Page is loading ...

Your Home

For repair- in your homo - of allmajor brand appliances,

lawn and garden equipment, or heating and cooling systems,

no matter who made it, no nlatter who sold It!

For the mplacament parts, accessories and

owner's manuals that you need to dolt-yourself.

For Sears professional installationof home appliances

and Items like garage door openers and water heaters.

1-B00-4-MY-HOME e Anytime,dz_arnight

(1-800-469-4663) (U,S.A. and Canada)

Wltr_r Ji gafl, Coil1 '_'=*rN. I; _,ars, _

Our Home

For repair of carry-in products likevacuums, lawn equipment,

and electronics, cell or go on-line forthe nearest

Sears Parts and Repair Center.

1-800-488-1222 Anytime,d_ ornight(U.S.A.only)

WWW,S_Zi, Qom

Topurchasea prQtectJceagreement(U.S.A.)

ormaintenanceagreement(Canada)ona productsewlcedbySears:

1-800-8Z'/'-6655 (_s.",.) 1-800-361-6665 (Cmada)

Parapsdrse_k_ode_rac_

a domlcZo,y paraordenarplsza_

1-888-SU-HOGARsM

(1-888-784_6_27)

AuCanadapoorsewiceenfiar_;a_

1.800-LE-FOYERMc

OSims,Rc_bu_ mdC_.

® RegisteredTrademarkI TMTradQmark/ m Sa'vice Markof Sears,Ro_buc_and Co.

a MarcaRegis_radaI m Mfc, a deF_brk:eI m Maroa deSet, do de_=, Roebuckand CO.

Marque deoomm_meI m Marque€1__s6e deSears,Roabu_ md Co.

Craftsman 351223070 Owner's manual

Brand: Craftsman

Model: 351223070

Category: Lathes

Type: Owner's manual

This manual is also suitable for

351.223070

Download PDF

report

in other languages

español: Craftsman 351223070 El manual del propietario

Craftsman 351223070 Owner's manual

This manual is also suitable for

Craftsman 351223070 Owner's manual

in other languages

Related papers

Other documents