Craftsman 351.223070 Owner's manual

Category
Lathes
Type
Owner's manual

This manual is also suitable for

Craftsman 351.223070 is a wood lathe stand designed to accommodate the Craftsman 15" Wood Lathe, Model Number 21750. The stand is made of sturdy steel construction and features a fiberboard shelf. Fasteners are provided for securing the lathe to the stand. The shelf is provided for extra stability and accessory storage. The lathe stand can accommodate lathes weighing approximately 175 Ibs. when completely assembled.

Craftsman 351.223070 is a wood lathe stand designed to accommodate the Craftsman 15" Wood Lathe, Model Number 21750. The stand is made of sturdy steel construction and features a fiberboard shelf. Fasteners are provided for securing the lathe to the stand. The shelf is provided for extra stability and accessory storage. The lathe stand can accommodate lathes weighing approximately 175 Ibs. when completely assembled.

Operator's Manual
I[RRFTSMRN'I
WOOD LATHE STAND
Model No.
351.223070
CAUTION: Read and follow
all Safety Rules and Operating
Instructions before First Use
of this Product.
Safety
Assembly
Parts Ust
Espaffol
Sears, Roebuck and Co,, Hoffman Estates, IL 60179 U.S.A.
www+ u ars, comlQ-an 8malt
24134,00 Draft (1_03/05)
Warranty....................... 2 Assembly..................... 3-5
Safety Rules.................... 2 Parts List ...................... 5
Uepacking.................... 2-3 Espa_ol...................... 6.9
FULL ONE YEAR WARRANTY
If this productfails due to a defect in matedal orworkmanshipwithinone year from
the date d purchase, Sears will at its option repair or replace itfree af charge.
Contactyour neareef Sears Service Center (1-800-4.-MY-HOME) to arrange for
productrepair,or returnthis productto place ol purchase forrapl_ment,
This warranty appliesonlywhb this productis usedin the United States,
This warranty gives you epeclle legal rightsand you may also have otherrights
whichvary from state to state.
Sears, Roebuck and Co., Dept. 817WA, Hoffman Estate_ IL 60179
Read and understandmanualsand
otherinstructionspro/ided.
Use only _csessohes designed for
stand or lathe.
Maks sure lathe and accessories
are securely damped.
AIwws check your set up.For e_arn-
pie, rotate accessory by hand before
applying power,
Keepyour mindon your work.Be
ated.
Dress properly.Do not wear jewelry,
gloves or looseclothing,
Wear a face shie_ or satetyglasses,
Never placehands in jeopardy.
Check forshippingdamage. If damage
has occurred,a claim mustbe fliedwith
the carrierfor fastest action.Check for
completeness.Locate all partsbefore
attempting assembly {referto Figure 1).
CAUTION: Do not attempt assemblyi
parts _ missing.Follow assan'_ly
instructions,Use parts listto order
replacement parts.
1 Top, (2)
2 Shell
3 Leg "A"(2)
4 Short Brace (2)
5 Long Brace (2)
6 ToolHolder
7 Leg "_'
8 Leg "C"
Hardware Bag (not shown) includes:
M8x 16Carriage Boll (24)
M8 Flat Washer (32)
M8 Hex Nut (28)
M4 x 12 Pan Head Screw (3)
M4 FlatWasher (3)
M4 Flex Nut (3)
M8 x 35 Hex Heed Bolt(4)
@Sears,RoebuckandCo,
2
\
Figure1. Unpaddnll
Rater to Figures1-8,
DESCRIPTION
SearsWood LatheStand is designedto
accommodateSears 15"Wood Lathe,
Model Number__21750.The standfea-
turassturdysteel constructionandfbar
board shelf,Fastenersare providedfor
securinglatheto stand,She| is provided
for e=drastability and aco_sary storage,
Before stand is assembled,a suitable
locationshouldbe chosen.The lathe
and stand weigh appro=(imatsly225 bs.
when completelyassembled.They
shouldbe assembledon Iocatiee.
Lathestandneeds to be set on a
fist, levelsurface,
Good lightingand correctpower
supplyare also requiredfors proper
workarea,
LEG SET ASSEMBLY
NOTE: Finger tightenbolts and nuts
untilassemblyd stand isconlplate and
lathe ispositionedonstand.Then tight-
en allfastenerssecurely,
Assemble the hesd_od( side W_Jset:
Place oee ofthe legs marksd'A' on
floor.
Pce_ieetop insidelegsothat slots
are alignedas indicatedin Figure2,
Attachtop to leg at stcts usingthree
8-1.25 x 16rnm carriagebolts,8rnm
fist washers and 8,125ram hex nuts.
Rgure 2 -AttachTopto Leg'A'
Place shod brace inside legand
attachusinghardwarespecified
above.Note that flange is located
towardsthetop,
Rguro 3 -Asmmble Shah Brace to leg
Positionleg 'B"outsidethe top and
shod brace. Attach as indicatedin
Figure 4 usingfour bolts, washers
and nuts.
3
Rgure 4 - AttsehLeg"B'to Auembiy
Set assemblyadde,
Asserrble taltstockside leg setin
thesalnemanner asabove,
ATTACHING LONG BRACES TO
LEG SETS
Place leg sets on floorupsidedown
apprcz,dmately 40" apart as shown in
Figure5.
Rgure S- PositionLegAssemblies
,, Positionlongbrace inside the legs
and attach as indicatedin Figure6
usingfourbolts, washers and nuts.
Notethat flangeis locatedtoward
thetop.
Turnatandrights'tdeup_¢_dposit'K_
atdesiredworklocation,
MOUNT WOOD LATHE
CAUTION; The wood lathe weighs
175 Ibs,Twopeople willbe requiredto
set lathe onstand.
Carefully set latheon stand. Align
holesin lathebed to slotsintop of
stand as shown in Figure7.Attach
lathe to stand usingtour 8-1.25 x
35mm has head bolts,eight 8mm
flatwashers, four 8ram _ washers
trod(_J_8rrcnhe_ nuts.Oo not
tighten fasteners _mpletely,
F_m'_7 - Mounting_tots _ Lsthe
Make sure stand setsfiat on floor.
Adjust legs i' needed.Tighten all
stand [astenarssecurely,
Securely tightenlathe mountingfaS-
teners,
ATTACH TOOL HOLDER
Attach toolholder torightfront leg
usingthree 4-0.7 x 12ram pan head
screws,4ram flat washers and 4rnm
he=(nuts.
Figure 6 - AtJach I.on
Attech remaining long brace in the
Sa_ manner as abcv_
INSTALL SHELF
Slide shelfbetween the legs, turn it
fiat andset ontothe braces,
Rgum 9 - Repl_menl Pads Illualration for L_he 8lind
KJEY
NO. PARr NO.
1 24137.00
2 24138.00
3 24139.00
4 24140.00
5 24141.00
6 24142.00
7 24143.00
8 24144.00
9 08624.00
10 STD851008
11 STD840812 ,
12 8TD863412
13 STDB51004.
14 STDB40407
15 STD835035
16 STDB52008
A 24145,00
A 24134.00
Standard hardware
,*, Not Shown
DESCRIPTION QTY.
Top 2
LegA 2
Short Brace 2
Legs 1
LongBrace 2
Shelf 1
LegC 1
Tool Holder 1
8-1.25 x 16rnrn Carriage Bolt 24
8mm Rat Washer" 32
8-1.25ram H_ Nut" 28
4-0.7 x 12ramPan Head Scre_° 3
4rnmFiat Washer* 3
4-0.7mm He_ Nut" 3
8-1.25 x 35ram Hex Head Bolt" 4
8rnmLockWasher* 4
Hardware Bag (incl.K6y Nos.9-16) 1
Operator'sManual 1
itemavailablelocally.
Your Home
For repair- in your homo - of allmajor brand appliances,
lawn and garden equipment, or heating and cooling systems,
no matter who made it, no nlatter who sold It!
For the mplacament parts, accessories and
owner's manuals that you need to dolt-yourself.
For Sears professional installationof home appliances
and Items like garage door openers and water heaters.
1-B00-4-MY-HOME e Anytime,dz_arnight
(1-800-469-4663) (U,S.A. and Canada)
Wltr_r Ji gafl, Coil1 '_'=*rN. I; _,ars, _
Our Home
For repair of carry-in products likevacuums, lawn equipment,
and electronics, cell or go on-line forthe nearest
Sears Parts and Repair Center.
1-800-488-1222 Anytime,d_ ornight(U.S.A.only)
WWW,S_Zi, Qom
Topurchasea prQtectJceagreement(U.S.A.)
ormaintenanceagreement(Canada)ona productsewlcedbySears:
1-800-8Z'/'-6655 (_s.",.) 1-800-361-6665 (Cmada)
Parapsdrse_k_ode_rac_
a domlcZo,y paraordenarplsza_
1-888-SU-HOGARsM
(1-888-784_6_27)
AuCanadapoorsewiceenfiar_;a_
1.800-LE-FOYERMc
OSims,Rc_bu_ mdC_.
® RegisteredTrademarkI TMTradQmark/ m Sa'vice Markof Sears,Ro_buc_and Co.
a MarcaRegis_radaI m Mfc, a deF_brk:eI m Maroa deSet, do de_=, Roebuckand CO.
Marque deoomm_meI m Marque€1__s6e deSears,Roabu_ md Co.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Craftsman 351.223070 Owner's manual

Category
Lathes
Type
Owner's manual
This manual is also suitable for

Craftsman 351.223070 is a wood lathe stand designed to accommodate the Craftsman 15" Wood Lathe, Model Number 21750. The stand is made of sturdy steel construction and features a fiberboard shelf. Fasteners are provided for securing the lathe to the stand. The shelf is provided for extra stability and accessory storage. The lathe stand can accommodate lathes weighing approximately 175 Ibs. when completely assembled.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages