NOYAFA NF-567 is a digital temperature and time controller that allows you to automate temperature-based actions and set precise time schedules for various appliances and equipment. With its wide temperature control range of -9°C to 99°C, you can use it for heating or cooling applications, such as controlling your home's air conditioner or heater. The device also features intermittent time control, allowing you to set specific intervals for when your connected appliances should turn on and off. Additionally, it has a countdown function that lets you set a timer for up to 9999 minutes.
NOYAFA NF-567 is a digital temperature and time controller that allows you to automate temperature-based actions and set precise time schedules for various appliances and equipment. With its wide temperature control range of -9°C to 99°C, you can use it for heating or cooling applications, such as controlling your home's air conditioner or heater. The device also features intermittent time control, allowing you to set specific intervals for when your connected appliances should turn on and off. Additionally, it has a countdown function that lets you set a timer for up to 9999 minutes.
Temperature Time Controller
NF-567
User manual
VER:V1 1. Overview
02
NF-567 is antemperature Time Controller. This product uses microcomputer
control technology and microprocessor as the core to realize intelligent
control output of temperature and time. The operation is convenient and
simple. Users can set and control the work and stop of other equipment
according to their own use. It is suitable for temperature and time control of
breeding room, farm, incubator, cold and hot ventilator, electric heating
equipment, water pump, boiler, and various household appliances.
2. The working principle
The instrument automatically samples the environment temperature through
the temperature sensor and detects it. When the environment temperature is
the same as the starting temperature set by the temperature controller, the
control circuit of the temperature controller starts When the ambient
temperature and the temperature controller set the same stop temperature,
the temperature controller control circuit to stop running.
3. Product buttons description
4. Operating Instructions
The temperature setting range of the temperature controller is -9°C to
99°C. The red digital tube in the middle displays the actual temperature
detected by the sensor in the current environment, and the left and right
digital tubes display the stop and start temperatures set by the user.
4.1 The temperature setting range of thetemperature Time Controller
4.2 Stop /start temperature
After 2 seconds of power-on display, the red in
the middle shows the actual temperature
sensed by the sensor, and the white on the left
and right show the stop temperature and start
temperature set by the user respectively.
4.3 High temperature start (Refrigeration control)
When "stop temperature" < "start temperature", the
temperature controller is in the "high temperature
start" state as shown in the figure. At this time, the
green light is on, and the socket is powered. It is
mainly used for cooling, such as turning on the air
conditioner, exhaust fan, etc.
4.4 Low temperature start (heating control)
When "stop temperature" > "start temperature",
the tem perat ure contr ol ler is in the "lo w
temperature start" state as shown in the figure.
At this time, the red light is on, and the socket is
powered off. Mainly used for heating.
4.5 Local calibration function
Press the SET key for more than 3 seconds to
enter the calibration menu, use the up and down
keys to calibrate between -5 and 5 degrees, and
select 0 without correction.
NF- 56 7
STOP
START
SET
ADJ .
NF- 56 7
STOP
STAR T
SET
ADJ .
NF-567
STOP
STAR T
SET
ADJ .
STOP
STAR T
SET
ADJ .
Stop state
Heating mode
Cooling mode
Stop temperature
Setup / Calibration
Engineering plastics
Working status
Heating mode
Cooling mode
Start temperature
5 hole output
01
Name Quantity
Temperature Time Controller 1PCS
Manual 1PCS
1PCS
Certificate
04 0503
5. Description of the temperature control function of
thetemperature Time Controller.
When "stop temperature" < "start temperature", the temperature
controller is in the "high temperature start" state. At this time, the green
light is on and the socket is powered. It is mainly used for cooling, such
as turning on the air conditioner, exhaust fan, etc.
5.1 Refrigeration control
When "stop temperature" > "start temperature", the thermostat is in the
"low temperature start" state as shown in the figure. At this time, the red
light is on, the socket is powered off, and it is mainly used for heating.
5.2 Heating control
When the actual temperature value is higher than 90°C, the red and
green indicator lights will flash and alarm at the same time.
5.3 Alarm Function
If there is a power failure during operation, all the parameters last set by
the tempe ra ture sensor will be autom at ically saved, and it will
automatically run according to the settings before the power failure after
the power supply is restored.
5.4 Power off memory
6. Time control of Temperature Time Controller.
Temperature controller time control mode: use the internal clock signal of the MCU.
6.1 Intermittent time control function
Press the middle setting button to display F1 as an intermittent time
control function, the left side of F1 corresponds to the stop time, and the
right side corresponds to the start time to realize the cycle.
Press the up and down keys (1-99 minutes) to set. For example, if the left
side of F1 is set to 10 and the right side is set to 20, it means that the red
indicator light is on when the control is stopped for 10 minutes; the green
indicator light is on when the control is running for 20 minutes. So cycle.
6.2 Countdown time control function
Press the middle setting key, displaying F2 is the countdown time control function:
the setting time range is between 0001 and 9999 minutes. Corresponding time on
the left: 1~99 settings. Corresponding time on the right: 1~99 settings. The left
corresponds to the thousands and hundreds of the timing time, and the right
corresponds to the tens and ones of the timing time.
For example, the left digital tube display is set to 06, and the right digital tube
display is set to 00, then the timing time is 600 minutes (10 hours). After 10
hours, the temperature controller stops, the green indicator light is off, and the
red indicator light is on. charging etc.
6.3 Appointment time control function
Press the middle setting key, displaying F3 is the reservation time control
function: the setting range is between 0001-9999 minutes. The left and right
correspond to the time setting of 1-99. The left side corresponds to thousands
and hundreds of times of the timing time, and the right side corresponds to the
tens and ones of the timing time. For example, if the left side is set to 00 and the
right side is set to 20, it means that after 20 minutes, the green indicator light of
the temperature controller will be on, and the temperature controller is in the
running state, which is suitable for scheduled start-up.
7. Product packing list
8. Parameters of Description
9. Matters needing attention
Product Name
Product Model
Temperature Sensing probe
Power Supply Voltage
Temperature Time Controller
NTC10K-100cm
160-250V AC 50/60Hz
NF-567
Temperature Control Range
Max Power
Max Current
Temperature control accuracy
Temperature sensing element
-9〜99℃
2200W
10A
±1℃
NTC
Temperature control function Refrigeration control
Heating Control
Alarm Function
Power off memory function
Hot start
Cold start
When the actual temperature is higher than
90°C, the traffic light flashing alarm.
Yes
Calibration function
Yes
Time control function
Intermittent time control function
Countdown function
Working environment temperature
Working relative temperature
Protection Level
Appearance size
-10〜60℃
20〜90%
IP20
145X78X40 mm
Yes
Yes
Yes
Function when making an
appointment
Make sure that the host and electrical appliances are installed out of
the reach of children.
When overhauling the electrical appliances, the output socket must
be disconnected first, otherwise, the electrical appliances start at any
time will cause personal injury.
Electrical equipment needs to be tested regularly to ensure normal
operation, and stop using it immediately before troubleshooting.
For places involving temperature monitoring of important properties,
multiple protection schemes should be adopted.
Electrical appliances exceeding the load power must use an AC
receiver and be installed by a professional electrician.
315x148mm 128g铜版纸
2023.02.15
3折页
NF-567说明书英文20230206-V1 彩色
HZL
无
变更记录
印刷要求
样品
-
1
-
2
-
3
NOYAFA NF-567 is a digital temperature and time controller that allows you to automate temperature-based actions and set precise time schedules for various appliances and equipment. With its wide temperature control range of -9°C to 99°C, you can use it for heating or cooling applications, such as controlling your home's air conditioner or heater. The device also features intermittent time control, allowing you to set specific intervals for when your connected appliances should turn on and off. Additionally, it has a countdown function that lets you set a timer for up to 9999 minutes.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
HASWILL ELECTRONICS STC-9100 Thermostat Refrigeration or Defrosting and Alarm Output Controller User manual
-
GVS CHTF-5.0/20.1.2 Series User manual
-
Danfoss 084B8528 User guide
-
Frymaster McDonald's H14 User manual
-
Invacare Cetus User manual
-
Electrolux EOEK62AK User manual
-
Haier 1U12BE2ERA User manual
-
-
BMW S 1000 RR - Rider's Manual
-
Carel EVD mini User manual
