PRODUCT SUPPORT | 800.927.2120 | WATERWORKS.COM PAGE 1 OF 1 | UPDATED ON 7.28.2023
INSTALLATION GUIDELINES
PAPER HOLDER
3. Secure the ESCUTCHEON using the SCREWS
provided.
NOTE: If needed, use the SCREW behind the
ESCUTCHEON to adjust the SWING ARM.
2. Using the previous marks as a reference, install the
ANCHORS provided.
1. Dry-fit the product to the finished wall and mark
the ideal location for installation.
IMPORTANT
¾To ensure this product is installed properly, you must read and follow these
guidelines.
¾The owner/user of this product must keep this information for further reference.
¾This product must be installed by a professional licensed contractor. Inspect this
product to ensure you have all the parts required for proper installation.
¾DRYWALL ANCHORS for a typical drywall installation are provided. Do NOT use the
ANCHORS if mounting directly onto wood blocking or a stud. To avoid damaging
the product, do NOT use power tools during installation.
¾If further assistance is required, please contact Product Support at 1-800-927-2120
Monday through Friday, 8am – 6pm EST.
SWING
ARM
ESCUTCHEON
SCREW
ADJUSTABLE
SCREW
[PRE-DRILLED
HOLES]
DRYWALL
ANCHOR
FINISHED
WALL
* DRY-FIT AND MARK LOCATION
TECHNICAL DETAILS:
DETAIL SPECIFICATION
PRIMARY MATERIAL BRASS
STYLE
HGPH31
HIGHGATE PAPER HOLDER
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
American Standard 6093 Installation guide
-
-
American Standard Robe Hook 6721 User manual
-
-
-
Kallista P34708-00-CP Installation guide
-
-
-
-
Symmons S-5504-2.0 Installation guide