2. ROOMS TO GO
  3. 74100226

ROOMS TO GO 74100226 Assembly Instructions

  • Hello! I have reviewed the assembly instructions for the Rooms To Go SOHO 48' Round Table. This document provides a step-by-step guide on assembling the table, including detailed parts list and hardware information.I'm here to answer any questions you may have regarding the table assembly process.
  • What should I do before starting the assembly?
    What is the first step in assembling the table?
    What is the second step after assembling the table?
ASSEMBLY INSTRUCTIONS
SHGP SOHO 48' ROUND TABLE
Manufactured for Rooms To Go SKU 74100226
Thanks for purchasing this quality product. Be sure to check all packing materials carefully for small parts, which may have come loose
inside the carton during shipment. Identify and count all parts and compare with the Hardware List below
Caution: Loosely pre-assemble all the bolts first. Do not fully turn until all bolts are inserted into the proper holes.
Step 1: Place the Top(Part A) on a clean, soft surface as a blanket or carpet. Assemble the Legs(Part B) to the Top by Bolt(M8*65)(Part C)
and Washer(Part Y), tighten with Allen Key(Part Z).
Step 2: After tightening all bolts, your product is ready for use.
PARTS LIST PARTS LIST
NO.: PIC DESC QTY NO.: PIC DESC QTY
A Top 1pc Y Washer(Φ16*Φ8.5*1) 8 pcs
B Leg 4pcs Z Allen Key 1pc
C Bolt(M8*65) 8pcs
Periodically check and make sure all bolts are fully tightened.
/