ESAB ESAB SAVAGE A40 Welding Helmet Declaration of conformity

EU DECLARATION OF CONFORMITY

According to

Council Directive (EU) 2016/425 entering into force 9 March 2016

Type of equipment

Welding helmet

Type designation etc.

Savage A40 Black - 0700 000 480

Savage A40 Black w/replaceable battery - 0700 000 490

Savage A40 Yellow - 0700 000 481

Savage A40 Yellow w/replaceable battery - 0700 000 491

Brand name or trade mark

ESAB

Manufacturer or his authorised representative established within the EEA

Name, address, telephone No:

ESAB AB

Lindholmsallén 9, Box 8004, SE-402 77 Göteborg, Sweden

Phone: +46 31 50 90 00, Fax: +46 31 50 92 22

The following harmonised standard in force within the EEA has been used in the design:

DIN EN 175:1997 Personal protection. Equipment for eye and face protection during welding and allied

processes

DIN EN 379:2003+A1:2009 Personal eye-protection. Automatic welding lters

DIN EN 166:2002 Personal eye protection. Specications

EC Type Examination Certicate and Test Certicates issued by:

ECS GmbH – European Certication Service

Aalen, Germany

Certicate: 1245-ECS-19 / MR 12451-ECS-19

By signing this document, the undersigned declares as manufacturer, or the manufacturer’s

authorised representative, that the equipment in question complies with the safety requirements

stated above.

Date Signature Position

2020-01-24

Carlos De Lima Product Design Compliance/ Electrical

Engineer, Std EQ Product Engineering

2020