ESAB F10 Flip front fixed shade welding helmet Declaration of conformity

EU DECLARATION OF CONFORMITY

According to the Council Directive (EU) 2016/425 entering into force 9 March 2016

Type of equipment

Welding Helmet F10

Type designation

Eco Arc II 60x110 kit of 20 0700 000 760

Eco Arc II 60x110 0700 000 761

Eco Arc II 90x110 kit of 20 0700 000 762

Eco Arc II 51x108 kit of 20 0700 000 763

Brand name or trademark

ESAB

Manufacturer or his authorized representative established within the EEA

Name, address, and telephone No:

ESAB AB

Lindholmsallén 9, Box 8004, SE-402 77 Göteborg, Sweden

Phone: +46 31 50 90 00, Fax: +46 31 50 92 22

The following harmonized standard in force within the EEA has been used in the design:

DIN EN 175:1997 Personal protection. Equipment for eye and face protection during welding and allied

processes

EC Type Examination Certificate and Test Certificates issued by:

ECS GmbH – European Certification Service

Notified Body: 1883

Certificate: C1388.2ESAB

Test Report: 10891-ECS-12 / 1149-ECS-17 / MR 11492-ECS-17

By signing this document, the undersigned declares as manufacturer, or the manufacturer’s

authorised representative, that the equipment in question complies with the safety requirements

stated above.

Date Signature Position

2021-02-10 Global R&D Standards and

Regulatory Expert

2021