ESAB A40 PAPR Filter User manual

Brand: ESAB

Model: A40 PAPR Filter

Type: User manual

ESAB A40 PAPR Filter: A high-performance filter system designed to protect against particulate contamination in various environments. Conforming to strict regulations, it offers reliable respiratory protection when paired with the Savage A40 PAPR system. The filter operates within a temperature range of -5 to +55℃ and can be used in combination with a pre-filter and spark arrestor for enhanced filtration. It ensures effective and comfortable breathing while performing tasks in hazardous environments.

Instruction manual

0-5598 GB 20201019

A40 PAPR Filter

SAVAGE A40 PAPR

Powered Air-Purifying Respirator System

Operating Manual Number 0-5596

Published by:

ESAB Group Inc.

2800 Airport Rd.

Denton, TX 76208

(940) 566-2000

www.esab.com

Reproduction of this work, in whole or in part, without written permission of the publisher is prohibited.

The publisher does not assume and hereby disclaims any liability to any party for any loss or damage caused

by any error or omission in this Manual, whether such error results from negligence, accident, or any other

cause.

Original Publication Date: 10/18/2020

Revision Date:

Record the following information for Warranty purposes:

Where Purchased:_______________________________

Purchase Date:__________________________________

TABLE OF CONTENTS

0-5598 © ESAB AB 2020

APPLICATION

.............................................................................................

1.1 ASSEMBLY

..............................................................................................

1.2 STORAGE AND MAINTENANCE

...........................................................

1.3 MARKING

................................................................................................

Rights reserved to alter specifications without notice.

1 APPLICATION

0-5598

- 4 -

1 APPLICATION

This filter, when used with the Savage A40 PAPR system as part of an approved system,

conforms to the requirements of Title42, Code of Federal Regulations, Part 84(42CFR84).

The complete equipment can be used in an environment that requires a breathing protection

device. The complete equipment protects against particulate contamination.

The operating temperature range of the filter is -5to+55℃.

It should be used together with:

Part number Denomination

0700 002 404 Pre-filter

0700 002 405 Spark arrestor

See figure 1 in the following chapter.

1.1 ASSEMBLY

1. Filter cover 4. Filter

2. Spark arrestor 5. Turbo unit

3. Pre-filter

Clean or replace the spark arrestor if necessary.

• Insert the spark arrestor (2) in the filter

cover (1)

• Place the pre-filter (3) on top of spark

arrestor (2).

1 APPLICATION

0-5598

- 5 -

• Place the filter (4) into the above

combination.

• Click the above combination into the

turbo unit (5).

1.2 STORAGE AND MAINTENANCE

Do not store outside the temperature range: -10to+55℃ or in relative humidity greater

than90%.

1.3 MARKING

The filter is marked according to the requirements of Title42, Code of Federal Regulations,

Part84 (42CFR84)

Marking Part No Color code Description / Protection against

PAPR HE Filter 0700 002 403 Purple Particulate

WARNING!

Only the particle filter and pre-filter manufactured by ESAB can be used together

with this system. Filters from other manufacturers should under no circumstances

be used.

Do not use the filter if the packaging bag is damaged or the filter has been exposed

to air or exceeded the allowed period of use, which is marked in the filter sticker.

For contact information visit esab.com

ESAB AB, Lindholmsallén 9, Box 8004, 402 77 Gothenburg, Sweden, Phone +46 (0) 31 50 90 00

http://manuals.esab.com

ESAB A40 PAPR Filter User manual

ESAB A40 PAPR Filter User manual

ESAB A40 PAPR Filter User manual

Related papers

Other documents