A GUIDE TO USING YOUR ILLUMINATED GYRO GLOBE™ (Model# 12541)
Locate the base adaptor on the South Pole of your Gyro Globe Ball and carefully place globe ball on the rotating base tip.
Turn the rotating base on, sit back, and enjoy as your Gyro Globe illuminates and begins its mesmerizing rotating motion.
Setting up your Gyro Globe™
Locate the rotating base, power cord, and power adaptor.
Plug in the micro-USB tip of the power cord into the micro-
USB opening of the rotating base.
To use an electrical outlet - Plug the large-USB tip of the
power cord into the power adaptor, then plug the power
adaptor into an outlet.
To use a computer or any USB outlet - Plug the large-USB
tip of the power cord into the USB opening of your
computer or any USB outlet.
About your Gyro Globe™
Your Gyro Globe™ features Wireless Power Transfer Technology! Illuminate your globe by simply placing it on the rotating base.
Watch as the base invisibly transfers energy into the globe and it magically lights up!!! Feel free to pick up your globe while it’s
rotating for a closer look. Once you are done, simply place it back on its base and it will automatically illuminate and resume its
rotating motion.
Your globe also features a two-way map (two maps in one) – a Topographical Map and a Political Map
When the globe is NOT-ILLUMINATED you see the TOPOGRAPHICAL MAP, which features Land Cover Data, Lands and Snow/Ice of
Polar Regions, Land Mass, Land Area, Water Regions, and Major Ocean Currents.
When the globe is ILLUMINATED, your globe transforms into a POLITICAL MAP as countries become visibly separated by color and
border lines. For more info and more globes, visit www.replogleglobes.com