KI Lancaster Auditorium Seating Disassembly Instructions

KI
Brand
KI
Model
Lancaster Auditorium Seating
Type
Disassembly Instructions

KI Lancaster Auditorium Seating

The KI Lancaster Auditorium Seating offers a comfortable and stylish seating solution for any auditorium or lecture hall. With its durable construction and easy-to-clean materials, the Lancaster Auditorium Seating is built to withstand the rigors of everyday use.

The seat and backrest are made of molded plastic for comfort and durability. The arm caps are made of steel for added strength. The column is made of steel and is powder-coated for a durable finish.

Lancaster Auditorium Seating is easy to disassemble for cleaning or maintenance. With just a few simple tools, you can remove the seat, backrest, and arm caps from the column.

KI Lancaster Auditorium Seating

The KI Lancaster Auditorium Seating offers a comfortable and stylish seating solution for any auditorium or lecture hall. With its durable construction and easy-to-clean materials, the Lancaster Auditorium Seating is built to withstand the rigors of everyday use.

The seat and backrest are made of molded plastic for comfort and durability. The arm caps are made of steel for added strength. The column is made of steel and is powder-coated for a durable finish.

Lancaster Auditorium Seating is easy to disassemble for cleaning or maintenance. With just a few simple tools, you can remove the seat, backrest, and arm caps from the column.

Required
Tools
Disassembly Instructions
Material Type:
Warning: This drawing format requires special non-standard fonts!!
Make sure the appropriate font files are installed!!!
TT Humanst 521 BT Light
O HelveticaLTStd-Cond
O HelveticaLTStd-LightCond
Lancaster Auditorium Seating
Page 1 of 2Rev. 0 P0033-0061
A. Steel B. Plastic
KI · 1330 Bellevue Street · P.O. Box 8100 · Green Bay, WI 54308-8100 · 1-800-424-2432 · www.ki.com
Procedure:
1. Remove the screw, washer and nut holding each side of the seat
to the seat support column and remove the seat assembly.
2. Remove the screws and nuts holding the backrest onto the back
supports and remove the backrest assembly.
3. Remove the screws holding the arm cap onto the top of the seat
support column and remove the arm cap.
4. Remove the nuts holding the column onto the floor and remove
the column.
(continued next page)
General Notes:
1. Disassembly time: 15-30 minutes
2. This procedure assumes basic familiarity with hand tools and
furniture terminology: no specialized training is required
3. All materials removed and disassembled shall be sorted and
segregated with like materials and disposed of or recycled
according to recycling availability or waste acceptance
4. For items to be recycled, refer to KI's End of Life Recycling
Matrix and KI's End of Life Recovery Options Matrix, available
at www.ki.com
All fasteners not explicitly tagged or
shown are Material Type A: Steel
SCALE 0.050
Gloves
Safety Glasses
Pry Bar
Philips Screwdriver
Putty Knife
Hex Socket Wrench
Rubber Mallet
Flat Screwdriver
Channel Lock Pliers
Torx Screwdriver
Combination Wrench
A
A
B
B
Required
Tools
Disassembly Instructions
Material Type:
Warning: This drawing format requires special non-standard fonts!!
Make sure the appropriate font files are installed!!!
TT Humanst 521 BT Light
O HelveticaLTStd-Cond
O HelveticaLTStd-LightCond
Lancaster Auditorium Seating
Page 2 of 2Rev. 0 P0033-0061
A. Steel B. Plastic C. Foam D. Fabric E. Wood
KI · 1330 Bellevue Street · P.O. Box 8100 · Green Bay, WI 54308-8100 · 1-800-424-2432 · www.ki.com
Procedure (continued):
6. Remove the screws holding the backrest shroud onto the back-
rest assembly and remove the shroud. Remove the screws
holding the backrest support brackets to the backrest and re-
move the brackets.
7. Remove the screws holding the seat shroud to the seat and
remove the seat shroud. Remove the screws holding the seat
frame to the seat board and remove the seat frame. Cut the web-
bing sleeve over the seat frame to remove it.
Gloves
Safety Glasses
Pry Bar
Philips Screwdriver
Hex Socket Wrench
Rubber Mallet
Flat Screwdriver
Channel Lock Pliers
Torx Screwdriver
Utility Knife
A
A
B
C
D
E
A
B
C
D
E
D
  • Page 1 1
  • Page 2 2

KI Lancaster Auditorium Seating Disassembly Instructions

KI
Brand
KI
Model
Lancaster Auditorium Seating
Type
Disassembly Instructions

KI Lancaster Auditorium Seating

The KI Lancaster Auditorium Seating offers a comfortable and stylish seating solution for any auditorium or lecture hall. With its durable construction and easy-to-clean materials, the Lancaster Auditorium Seating is built to withstand the rigors of everyday use.

The seat and backrest are made of molded plastic for comfort and durability. The arm caps are made of steel for added strength. The column is made of steel and is powder-coated for a durable finish.

Lancaster Auditorium Seating is easy to disassemble for cleaning or maintenance. With just a few simple tools, you can remove the seat, backrest, and arm caps from the column.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents