Atdec Wall Mount VFWD User manual
- Category
- Flat panel accessories
- Type
- User manual
The Visidec Focus VF-WD provides a compact, low prole solution for mounting
computer monitors and small screens to a wall. This space-saving mount is
designed to maximise versatility without compromising space. Holding the display
just a few inches from the wall, it provides a surprising level of movement with tilt /
pan adjustment and horizontal to portrait screen orientation. Installation is simple
with wall and display mounting hardware all included.
Focus | Wall Direct monitor mount
VF-WD
Atdec Global www.atdec.com.au
Atdec North America www.atdec.com
Attachment head
allows for screen
tilt, pan &
rotation
Can be attached to a
variety of wall surfaces
and comes supplied with
all mounting hardware
Quick & easy
installation
Sleek & contemporary
design
R
* 200x100 VESA mounting support via optional adaptor accessory
Product key features:
Designed for monitors 12" or larger up to 8kg (17.5lbs)
Adjustable tilt: +/- 70° **
Adjustable pan +/- 45° **
Allows landscape to portrait screen rotation
Distance from wall: 94mm (3.75”)
Comes with install guide, display and wall mounting hardware
Durable design with 10 year warranty
Suits 75x75mm &
100x100mm mounting
(100x200mm optional)*
max display weight:
8kg (17.5lbs)
Adjustable tilt
and pan
Wall mount
solution
Adjustable screen
orientation
VESA
R
Professional mounting solutions for the home and oce
Suits monitors 12"
or larger
This product is part of the Visidec Focus range of monitor
and notebook mounts with solutions for wall and desk attachment.
** The tilt and pan facility oered by this mount will be limited by screen size.
Larger monitors will reduce the amount of adjustment.
Please see the technical specications on the reverse side of this brochure for further details.
Product information, single unit
Package information, master pack
Package information, single unit
Technical drawings
Load capacity
Material Color
Polished8kg (17.5lbs) Aluminum
Size
Ship weight UPC code Contents
All hardware required for
installation supplied
881493004429
11cm x 10cm x 10cm
(4" x 4" x 4")
0.4kg (0.8lbs)
Size
Ship weight UPC Units per master pack
24881493002623
44cm x 31cm x 22cm
(12" x 8.5" x 17.25")
10kg (17.8lbs)
Atdec Global www.atdec.com.au
Atdec North America www.atdec.com
90mm
(3½”)
93.5mm
(3¾”)
10 0 mm
(4” )
75 mm
(3” )
5 8mm
(2¼ ”)
75 mm
(3” )
10 0 mm
(4” )
VESA Mounting Plate
in 75x75mm position
Ø 6.5
VESA Mounting Plate
in 100 x100 mm position
Portrait/Landscape
Maximum: 95°
PAN
Maximum: ± 45°
With typical 24” display attached: ± 13°
TILT
Maximum: ± 70°
With typical 24” display attached: ±29.5 °
Related Products
VF-AT-W
Articulated Wall Mount
VF-AT
VF-AT-D
VF-AT-NP
Articulated Desk Mount
Articulated Dual Display Desk Mount
Articulated Notebook Desk Mount
AC-AP-2010
100x200mm VESA Adaptor
Atdec mounts are designed, developed and tested in Australia. We manufacture an
extensive range of display and projector mountings for a variety of user types and
situations. While all eorts have been made to ensure the information in this brochure
was correct as of the date of printing, we reserve the right to change specications
without notice. Please refer to the website for our full range along with the latest details
on specications, compatibility and dealer location. Atdec and telehookare registered
trademarks with all rights reserved. Copyright May 2011 V2.0
R
-
1
-
2
Atdec Wall Mount VFWD User manual
- Category
- Flat panel accessories
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Atdec VF-AT-W User manual
-
Atdec Notebook Arm VFATNP User manual
-
Atdec SD-WD Product information
-
-
Atdec TH-1040-VFM User guide
-
-
-
-
Atdec TH-2050-VFM User guide
-
