Range of wireless sirens 869 MHz
Made in FRANCE
SIRENS RF
This quick start guide allows quickly installing the PILOTE RF and its sirens in the factory settings.
For any other operation, please see the complete technical manual.
1- INSTALLATION
REQUESTED MOUNTING DIRECTION
SIRYNX RF SIRUS RF PILOTE RF
2- CONNECTION OF THE SIRENS BATTERIES
Connect imperatively two batteries to the electronic card to ensure the autonomy of the
SIRYNX RF and of the SIRUS RF.
3- DESCRIPTION OF THE CONNECTION TERMINAL OF THE PILOTE RF
0V
DC
Charge
+12V
The power 12V continues to be supplied by an uninterruptible power supply
with limited power.
1
Output for supervision failure (by default = 0V)
2
Output for the failure of sirens low battery (by default = 0V)
OUTPUTS
3
Output for the failure of the PILOTE RF batteries (default = 0V)
CMD
Input of command configurable
Factory settings : Information Arm/Disarm
Alarm by disappear of 12V
INPUTS
BL.SIR
Input of sirens blocking configurable
Factory settings : Triggering of all the sirens
Alarm by disappear of 12V
A.P. TAMPER
Tamper protection
TOP
TOP
TOP
CAUTION
MANDATORY
Get the wires to
the bottom of
the housing
SIRYNX RF
BATTERIES
