SPC BAAMBA GYRO 4.0 User manual

Brand: SPC

Model: BAAMBA GYRO 4.0

Category: Robotic vacuum cleaners

Type: User manual

This manual is also suitable for

BAAMBA

SPC BAAMBA GYRO 4.0

SPC BAAMBA GYRO 4.0 is a smart robot vacuum cleaner that can be used to clean various types of flooring, including wood, tiled flooring, and carpets. It features a main brush, a side brush, a rubber brush, and a filter to ensure thorough cleaning. The vacuum cleaner can be controlled manually or via the SPC IOT app, which allows for remote control and scheduling of cleaning tasks.

Here are some of the capabilities of the SPC BAAMBA GYRO 4.0:

Automatic cleaning: The vacuum cleaner can be set to automatically clean your home on a schedule, so you can come home to a clean house every day.

SPC BAAMBA GYRO 4.0

Here are some of the capabilities of the SPC BAAMBA GYRO 4.0:

Automatic cleaning: The vacuum cleaner can be set to automatically clean your home on a schedule, so you can come home to a clean house every day.

Robot Vacuum Cleaner

BAAMBA · BAAMBA GYRO 4.0

USER GUIDE

PRECAUTIONS

The user manual must be provided with the smart robot vacuum cleaner so it can be used

safely.

Unplug the smart robot vacuum cleaner before performing any cleaning or maintenance.

This smart robot vacuum cleaner can be used by children 8 years of age or older and

individuals with physical, sensory or mental disabilities, or a lack of experience or

knowledge, if they are supervised or given instructions on the safe use of the smart robot

vacuum cleaner and they understand the danger entailed. Children must not play with

the smart robot vacuum cleaner or perform cleaning or maintenance tasks unsupervised.

Children must be supervised to ensure they do not play with the smart robot vacuum

cleaner.

Only the power supply cable provided with the smart robot vacuum cleaner may be used.

This smart robot vacuum cleaner is only for domestic use.

TABLE OF CONTENTS

1. Safety instructions

1.1 Recommendations for use

1.2 Safety measures

1.3 Child safety

1.4 Battery information

1.5 Usage areas

1.6 Exception clause

2. Product components

2.1 Main body and accessories

2.2 Introduction to the accessories

3. Product installation

4. Product use

4.1 Use of main body

4.2 Charging methods

4.3 User guide for the mobile app

5. Product maintenance

5.1 Daily storage

5.2 Cleaning the charging contacts

5.3 Cleaning the dust container

5.4 Cleaning the main brush

5.5 Cleaning the side brush

5.6 Cleaning the wheels

5.7 Cleaning the sensors

6. Common problems

7. Technicalspecications

WELCOME !

In this guide you’ll nd all the information you need to get the most out of your SPC Baamba or Baamba

Gyro 4.0 smart robot vacuum cleaner.

CREATE AN ACCOUNT SPC

A ton of free advantages just a click away.

Before continuing reading this guide, we recommend visiting www.spc-universe.com, CREATING AN

ACCOUNT AND REGISTERING YOUR PRODUCT.

That way, you’ll join the SPC universe: an exclusive club for our customers with great discounts, such

as promotions to improve or update your SPC system.

Furthermore, with this account you’ll have free access to all of SPC’s services, like apps for tablets and

smartphones and our technical support section.

That’s SPC. A universe in technology.

SPC IOT: “an app for your Smart Home products”

At SPC we believe in practicality and convenience, which is why we’ve worked hard to create a new app

for controlling ALL of your SPC IoT Smart Home devices.

INTERACTION BETWEEN DIFFERENT

DEVICES AND MORE FUNCTIONALITY

Via our SPC IOT app you’ll be able to get your SPC

IOT devices to interact creating conditionals.

Do you want your living room light to turn on

when your camera detects motion?

Do you want your air conditioning to turn on when

the temperature goes up in your room?

Do you want to change the TV channel by

speaking to Alexa or Google home?

You’ll be able to nd out how to do this and a lot

more in SPC IOT app’s detailed manual.

Get access to technical support on our website

www.spc-universe.com and download it!

1. SAFETY INSTRUCTIONS

1.1 Recommendations for use

Before using the product, take the following safety precautions into account:

Read the instructions thoroughly. Use the product in accordance with the operating procedures.

Keep the instructions in a safe place for referring to in the future. .

If you wish to give the product to someone else, include the instructions.

Improper use can cause serious harm to individuals and damage the product.

1.2 Safety measures

WARNING

Use only the original adaptor, battery and

charging base. Otherwise you will damage the

smart robot vacuum cleaner and could cause a

re due to electrical shock and high voltage.

If you nd that the main body or the accessories

are damaged, don’t use the smart robot vacuum

cleaner and get in touch with the after-sales

service. It is forbidden to disassemble, repair or

reassemble the smart robot vacuum cleaner.

Unplug the smart robot vacuum cleaner before

performing maintenance tasks.

Don’t touch the battery socket or the smart

robot vacuum cleaner with wet hands. If you do,

you could get an electrical shock.

If the main chord is damaged, contact us and

wait for a professional to replace it to avoid

damage.

To avoid the vacuum cleaner accidentally

falling and causing personal injury, do not use

this product without the magnetic boundary

marker strip or leave objects blocking the stairs.

Do not place the smart robot vacuum cleaner

near sources of heat or ammable, explosive or

corrosive materials.

To avoid personal injury, do not place articles of

clothing or any part of your body (hair, ngers,

etc.) in the main brush or in the wheels.

WARNING

The smart robot is only for indoor use.

Clean the chords and other components

on the oor, in case they are tangled in

the wheels or brushes.

The charging base and the space isolator

must be placed against the wall and on a

at surface. Otherwise its operation will

be affected.

Avoid water, oil or other liquids getting

into the smart robot.

Remove fragile objects.

Turn off the smart robot before removing

the battery.

1.3 Child safety

Children must not use this smart robot

unsupervised.

Children are forbidden from playing with plastic

bags since they could suffocate.

1.4 Battery information se debe usar con la batería original.

1. The smart robot must only be used with the original battery.

2. Unplug the smart robot before removing the battery.

3. The battery must be removed before disposing of the smart robot.

4. If you want to change the battery, get in contact with our after-sales service. Placing the wrong

battery in the smart robot can cause damage.

5. If the battery leaks, do not touch the liquid. Clean the liquid with a dry cloth and take the battery to a

recycling bin or a green point. Do not throw it out in just any given location.

Unplug the smart robot if you’re not

going to use it for a long period of time.

Do not vacuum up sharp objects with

this smart robot, i.e. glass, nails or

other materials to avoid damaging the

product.

If you unplug the charging base when it

is in operating, the smart robot will not

be able to charge.

Do not use this vacuum in damp

environments, ammable, explosive or

corrosive substances.

Danger!

Electric shock

6. Separate the used battery from the other parts (for example, the remote control). The battery includes

dangerous substances. Recycle it according to the original regulations on environmental protection.

1.5 Usage areas

APPLICABLE RANGE

The vacuum can be used on the following surfaces:

1.6 Exceptions

In the following cases the product will not be repaired free of charge. The reparation will have an

additional cost:

A. The product failure has been caused by use or storage by the user which does not follow our manual.

B. The smart robot and its components are out of warranty.

C. The product failure has been caused by disassembly performed by a technician who hasn’t been

sent or authorised by our company.

D. A valid receipt of purchase is not provided.

E. The warranty card model does not correspond with the product to be repaired or it has been modied.

F. The product failure is due to causes outside the sphere of inuence, i.e. natural disasters.

G. The product failure or the damage caused to the product are a result of accidental or human factors

(for example, poor operation, contact with liquids, inappropriate insertion and extraction, scratches,

handling, bumps, incorrect input voltage, etc.).

Wood Tiled Flooring Carpet

2. PRODUCT COMPONENTS

2.1 Main body and accessories

NOTES: A battery, two side brushes and a lter are mounted on the main body and two other side brushes and a lter are

located inside.

Main body

Adaptor

Side brush

Charging base

User manual Filter

Cleaning brush

Battery

Screwdriver

FRONT IMPACT

AREA

FRONT WHEEL

LEFT WHEEL

CENTRAL BRUSH

BATTERY

TOP COVER

2.2 Introduction to the accessories

Top view

Bottom view

INDICATOR LIGHT

ON/CHARGING

CONTAINER BUTTON

SIDE BRUSH

RIGHT WHEEL

RUBBER BRUSH

3. PRODUCT INSTALLATION

Install the battery before using the vacuum.

1. Connect the end of the battery to the smart robot vacuum cleaner. Then, push the battery down until

it is inserted in the space designed for it.

2. Place the charging base on a smooth surface on the oor against the wall. Clean the dust and

remove any objects from the area, stick the charging based to the oor. Then, insert the adaptor into

the mains outlet.

TIPS

Insert it into the smart robot

during installation.

Pull it out in the opposite

direction to remove.

CHARGING BASE

PLUG ADAPTOR

Danger! Electrical shock

1. Place the charging base on a at surface on the oor, against the wall. Make sure there is nothing

blocking it within a distance of 3 metres ahead of it or a 1 meter radius around it. Do not place the

charging base on a carpet. Once the charging base is put into position it is recommended to not move

it from this location.

2. Connect the adaptor to the charging base.

4. PRODUCT USE

4.1 Use of main body

INTRODUCTION TO THE CONTROL BUTTONS

(Ref/SKU: 6401N BAAMBA)

(Ref/SKU: 6402S BAAMBA GYRO 4.0)

OPERATING MODES

Manual mode

(Ref/SKU: 6401N BAAMBA)

AUTOMATIC CLEANING

Briey press the button “

“. The indicator lights will turn on and

the smart robot vacuum cleaner will go into standby mode. Then,

press the “

“ button again and the smart robot vacuum cleaner

will automatically start to clean.

Charging button

Power on/off button

Button Power on/off

Charging button

Short press

In standby

Double click

CLEAN

INTRODUCTION TO THE BUTTONS

AUTOMATIC CHARGING

When the vacuum is in standby mode, press the “

“ button two

times and the indicator light will ash. This means that the smart

robot vacuum cleaner is in automatic charging mode.

Manual mode (Ref/SKU: 6402S BAAMBA GYRO 4.0)

AUTOMATIC CLEANING

Briey press the button “

CLEAN

“. The indicator light will turn red

(standby mode). By pressing the button again, the indicator

light will go back to green and the vacuum will start to clean

automatically.

AUTOMATIC CHARGING

When the vacuum is in standby mode, press the “

CLEAN

“. button two

times. The indicator light will turn green and it will start to ash,

ths means that the smart robot vacuum cleaner has gone into

automatic charging mode.

INDICATOR LIGHT OPERATING GUIDE

(Ref/SKU: 6401N BAAMBA)

No. State Display Operation

Power off

"POWER" and "HOME"

light turned off

Press ""POWER"" for 4 seconds to

turn the device off.

2. In sleep mode, if the state of the

battery is low or the elapsed time is

greater than 8 hours, the robot will

turn off.

Power on

"POWER" and "HOME"

light turned on

Press "POWER" briey to go into

standby mode.

Cleaning "POWER" light on

Press "POWER" briey to go into self-

cleaning mode.

Recharge "HOME" Flashing blue

Press "HOME" briey to go into

charging mode.

Charging "HOME" Flashing blue

"HOME" and "POWER"

Flashing blue at same

time

Fully charged

"HOME" Sustained

bright blue light

Pairing mode "HOME" Flashing blue

Press and hold "HOME" for 6

seconds to go into connection mode.

INDICATOR LIGHT OPERATING GUIDE

(Ref/SKU: 6402S BAAMBA GYRO 4.0)

No. State Display Operation

Power Off Lights Off

1. In standby mode, after 5 minutes

the robot will go into sleep mode.

2. In sleep mode, if the state of the

battery is low or the elapsed time is

greater than 8 hours, the robot will

turn off.

Power On Red light on

Press "CLEAN" briey and go into

standby mode.

Cleaning Green light on

Press "CLEAN" briey and go into

automatic mode

Recharge Flashing green

Double click on "CLEAN" and it will

go into recharge mode.

Charging Flashing red

Error

Flashing red and a

beep

Fully charged Lights Off

Pairing mode Flashing orange

Press and hold "CLEAN" for 5

seconds until the indicator light

starts to ash orange.

4.2 Charging methods

MANUAL CHARGING

AUTOMATIC CHARGE

1. Charging using the charging base:

To start, connect the adaptor to the charging

base. Then, connect it to the power supply.

Place the vacuum in the charging base

to charge. (The blue indicator light of the

icon indicating the charge will ash when

charging. The blue indicator light will stay

on once the smart robot vacuum cleaner

has been charged.)

AUTOMATIC CHARGE

When the smart robot vacuum cleaner has

almost run out of battery, the indicator

light will ash and the smart robot vacuum

cleaner will go into automatic charging

mode.

2. In the app, click on “CHARGE”. The

vacuum will look automatically for the

charging base.

Danger! Electrical shock

4.3 User guide for the mobile app

NOTE

Due to software updates and other causes, this user guide will not be regularly updated. This

document is of an indicative nature only, unless otherwise stated. The statements, information

and recommendations included in this document do not constitute an express or implicit

guarantee.

Installation of the SPC IoT APP

Your device must have the Android 4.0 or IOS 7.0 operating system or higher.

Look in the market for the SPC IoT, app, download and install it. Or if you prefer, scan the QR code to

access our website where you’ll nd the links to your market.

Download and install the app.

Preparation

1. Press the “POWER” button on the main unit to go into standby mode.

2. Click on “Settings” on your mobile phone and connect to the WiFi network.

3. Find this app in the list of apps. Click to open it.

REGISTRATION AND ACCESS

When you open the application you’ll see the following screen. Click

on “Connect using an existing account” and you’ll be able to add the

registered account number (telephone number or email address).

Then add your password in order to login. You can also click on

“Create a new account” to register.

Since you haven’t registered yet, you have to sign up. Add your

telephone number or email address on the screen shown below and

click on “Next”.

Add the verication code and a password of your choice to complete

registration. Click on “Conrmar” to access the start page.

If you want to use an existing account, click on “ Connect using an

existing account” on the screen shown below. To access the page

you need your password. If your password is incorrect, click on

“Have you forgotten your password?” to recover your password.

FORGOTTEN PASSWORD

If you have forgotten your password, click on “Have you forgotten

your password?” to recover your it. On the “You’ve forgotten your

password” screen, add your telephone number or email address and

click on “Next” to verify your identity.

On the screen shown below, add the verication code and the new

password. Click on “Conrm”. If you are not able to login, repeat the

process.

ADD DEVICE

Click on “Add device”

Select the device you wish to connect. In this case the robot vacuum.

Press and hold the power on/off button

for 6 seconds until the

indicator light ashes. Click on “Conrm”.

Add your WiFi network’s password and click on “Conrm”.

Wait for the mobile to connect to the internet (as shown below).

When you’ve added the device successfully, click on “Done” on the

screen shown below:

OPERATION CONTROL SCREEN

Access the operation control screen shown below:

On the operation control screen click on “Manual” to open the

control panel. The smart robot vacuum cleaner will exit standby

mode. Click on any arrow for the robot vacuum to go into operation.

Click on the “Timer” function to adjust the time.

Page is loading ...

SPC BAAMBA GYRO 4.0 User manual

Brand: SPC

Model: BAAMBA GYRO 4.0

Category: Robotic vacuum cleaners

Type: User manual

This manual is also suitable for

BAAMBA

SPC BAAMBA GYRO 4.0

Here are some of the capabilities of the SPC BAAMBA GYRO 4.0:

Automatic cleaning: The vacuum cleaner can be set to automatically clean your home on a schedule, so you can come home to a clean house every day.

Download PDF

report

SPC BAAMBA GYRO 4.0 User manual

This manual is also suitable for

SPC BAAMBA GYRO 4.0 User manual

Related papers

Other documents