Linn 5 series Quick Start

Linn
Brand
Linn
Model
5 series
Type
Quick Start
REMOVE TRANSIT SCREW
M6 x 40 (YELLOW TAG)
SERIES 5 QUICKSTART
PRODUCT SHOWN IS 520 SPEAKER.
PACK 1787
1/2
CONSULT YOUR LINN SPECIALIST FOR
CONFIGURING THE LOUDSPEAKERS
THROUGH KONFIG.
FOR ADDITIONAL STABILITY,
SPEAKER MUST BE FITTED
WITH ANTI-TILT BAR.
(520 SPEAKER ONLY)
DO NOT ATTEMPT TO LIFT SPEAKER ALONE.
ALWAYS LIFT WITH 2 PEOPLE.
SUPPORT SPEAKER AT BOTH ENDS
WHILST TILTING.
4
ALWAYS LIFT BY THE METAL BASE,
NOT BY THE GLASS PANEL.
SERIES 5 QUICKSTART
PRODUCT SHOWN IS 520 SPEAKER.
PACK 1787
2/2
REMOVING THE COVER
PLEASE ALSO REFER TO
www.linn.co.uk/guide
1
2
3
7
8
5
6
4
HOLD THE FABRIC IN PLACE
AROUND THE BOTTOM OF
THE ARRAY TRIM WHILE
PULLING THE COVER OVER
THE SPEAKER
FABRIC COVER CARE INSTRUCTIONS:
DO NOT WASH
DO NOT DRY CLEAN
WIPE WITH DAMP SPONGE
NO DETERGENT
DO NOT TUMBLE DRY
DO NOT VACUUM OVER OR AROUND ARRAY TRIM
USE LINT ROLLER TO REMOVE DUST
HOLD THE FABRIC IN PLACE
AROUND THE BOTTOM OF
THE ARRAY TRIM WHILE
PULLING THE COVER OVER
THE SPEAKER
PULL THE BOTTOM EDGE OF
THE ARRAY TRIM TO REMOVE
DO NOT PULL ON THE FABRIC
TO REMOVE THE ARRAY TRIM
  • Page 1 1
  • Page 2 2

Linn 5 series Quick Start

Linn
Brand
Linn
Model
5 series
Type
Quick Start
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents