Rinnai PCD03-SM2-BP Installation guide

Brand: Rinnai

Model: PCD03-SM2-BP

Type: Installation guide

Rinnai Corporation • 103 International Drive • Peachtree City, GA 30269 • Toll-Free: 1-800-621-9419 • Fax: 678-829-1666 • www.rinnai.us

10/2008 100000100

INSTALLATION INSTRUCTIONS

Bottom Plate for Pipe Cover

1. Install the bottom plate during

assembly of the right and left plates

and bottom brackets of the standard

pipe cover assembly. (The bottom

plate is a separate component from

this assembly.)

2. Place the front bottom bracket

completely inside the bottom plate.

See Figure 1.

3. Place the back bottom bracket tabs

between the slots in the back of the

bottom plate.

4. Install the right and left plates by

inserting each one between the bottom

brackets and bottom plate. Attach

parts using screws and washers. See

Figure 2. The brackets of the bottom

plate should appear on the outside of

the assembly.

5. Complete the rest of the installation

according to the pipe cover

instructions.

Back Bottom Bracket

Front Bottom Bracket

Bottom Plate

Figure 1

Figure 2

Part / Model

Number

Description

PCD01-SM2-BP

Bottom Plate for

PCD01-SM2 Pipe Cover

R63LSe

PCD03-SM-BP

Bottom Plate for

PCD03-SM Pipe Cover

R50LSi, R75LSi,

R94LSi, Designer

PLUS models

PCD03-SM2-BP

Bottom Plate for

PCD03-SM2 Pipe Cover

R75LSe, R94LSe

Used on:

Rinnai PCD03-SM2-BP Installation guide

Rinnai PCD03-SM2-BP Installation guide

Rinnai PCD03-SM2-BP Installation guide

Related papers

Other documents