2. Rinnai
  3. PCD03-SM2-BP

Rinnai PCD03-SM2-BP Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Rinnai PCD03-SM2-BP Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Rinnai Corporation • 103 International Drive • Peachtree City, GA 30269 • Toll-Free: 1-800-621-9419 • Fax: 678-829-1666 • www.rinnai.us
10/2008 100000100
INSTALLATION INSTRUCTIONS
Bottom Plate for Pipe Cover
1. Install the bottom plate during
assembly of the right and left plates
and bottom brackets of the standard
pipe cover assembly. (The bottom
plate is a separate component from
this assembly.)
2. Place the front bottom bracket
completely inside the bottom plate.
See Figure 1.
3. Place the back bottom bracket tabs
between the slots in the back of the
bottom plate.
4. Install the right and left plates by
inserting each one between the bottom
brackets and bottom plate. Attach
parts using screws and washers. See
Figure 2. The brackets of the bottom
plate should appear on the outside of
the assembly.
5. Complete the rest of the installation
according to the pipe cover
instructions.
Back Bottom Bracket
Front Bottom Bracket
Bottom Plate
Figure 1
Figure 2
Part / Model
Number
Description
PCD01-SM2-BP
Bottom Plate for
PCD01-SM2 Pipe Cover
R63LSe
PCD03-SM-BP
Bottom Plate for
PCD03-SM Pipe Cover
R50LSi, R75LSi,
R94LSi, Designer
PLUS models
PCD03-SM2-BP
Bottom Plate for
PCD03-SM2 Pipe Cover
R75LSe, R94LSe
Used on:
/