Craig CVD508 helps you receive and watch digital and analog TV content on your existing TV. You can connect the device to your TV using either RF or AV cables, and to your VCR for recording. It comes with a remote control for easy operation, and you can set favorite channels for quick access. The device also includes features such as an electronic program guide, closed captioning, and parental controls, ensuring a convenient and enjoyable TV viewing experience.
Craig CVD508 helps you receive and watch digital and analog TV content on your existing TV. You can connect the device to your TV using either RF or AV cables, and to your VCR for recording. It comes with a remote control for easy operation, and you can set favorite channels for quick access. The device also includes features such as an electronic program guide, closed captioning, and parental controls, ensuring a convenient and enjoyable TV viewing experience.
Size: 148.5(W) x 210(H)mm (A5)
DIGITAL TO ANALOG BROADCAST
CONVERTER WITH REMOTE CONTROL
DIGITAL TO ANALOG BROADCAST
CONVERTER WITH REMOTE CONTROL
Model: CVD508
PLEASE READ BEFORE OPERATING THIS EQUIPMENT.
Owner's Manual
To assure continued compliance,
WARNING:
To reduce the risk of fire or electric
shock. Do not expose this product to
accessories only.
follow the attached installation
instructions and use only shielded
cables when connecting to other
FCC NOTICE:
device.
devices. Modifications not
authorized by the manufacturer
m a y v oid us er`s aut hor i ty t o
operate this
1
rain or moisture.
To reduce the risk
of fire or electric
shock, and annoying
interference. Use
the recommended
~
~
outside antenna system, extreme care should be
taken to keep from touching such power lines or
circuits as contact with them might be fatal.
2
NOTE: Refer all servicing to qualified service
personnel Servicing is required when the unit
has been damaged in any way such as the
plug has been damaged, liquid has been
spilled into unit, the unit has been exposed
to rain or moisture, the unit has been
dropped or the unit does not operate normally.
following: the power-supply cord or
3
LOCATION OF CONTROL
Front View
Rear View
1
2
3
4
5
6
7
8
9
4
1. ( Power ) Button
2. POWER/STANDBY Indicator
3. CHANNEL Buttons
4. Remote Sensor
5. RF IN Jack
6. RF OUT Jack
7. VIDEO OUT Jack
8. AUDIO OUT Jacks
9. DC IN Jack ( DC 5V, 2A )
REMOTE CONTROL
1. ( Power ) Button
2. EPG ( Electronic Program Guide ) Button
4. - ( Dash ) Button
5. AUDIO Button
6. SIGNAL Button
10. OSD ( On Screen Display ) Button
11. MENU Button
12. MUTE Button
13. C.C. ( Close Caption ) Button
14. FAV ( Favorite ) Button
15. RETURN Button
Buttons
17. V+/ (Volume Up and Direction Right ) Button
18. OK Button
19. ASPECT Button
20. EXIT Button
5
16. FAV +/- ( Favorite Channel Up/Down )
Install or Replace the batteries in Remote Control:
3. Close the battery door.
polarity marking inside the battery compartment.
1.Press the tab on the battery door then lift it off.
ze batteries into the compartment as the i2.Insert 2 x ”AAA” s
3. 0-9 Numeric Buttons
7. CH/ ( Channel/Direction Up ) Button
9. CH/ ( Channel/Direction Down ) Button
8. V-/ ( Volume Down/Direction Left Button )
EFFECTIVE DISTANCE OF THE REMOTE CONTROL TRANSMITTER
NOTE:
Approx. 16 Feet
30
30
o
o
6
7. Clean the battery contacts and also those of the device prior to battery installation.
~ When there is an obstacle between the unit and the transmitter, the transmitter may not
operate.
~ When direct sunlight, an incandescent lamp, fluorescent lamp or any other strong light
shines on the remote control of the unit, the remote operation may be unstable.
From Antenna
7
To Antenna Jack on external Television
To AC Wall Outlet
From RF Out Jack on the rear of unit.
To RF In Jack on the rear of unit.
To DC IN Jack on the rear of unit.
1. Connect your existing antenna cable to the RF IN jack of the converter box.
2. Connect the supplied RF coaxial cable from RF OUT jack of the converter box to the
antenna jack of the external Television.
3. Insert the small plug from supplied AC/DC Adapter into the DC In jack on the rear of the
unit.
4. Insert the supplied AC/DC Adapter to any wall outlet having AC 100-240V~, 50/60Hz.
NOTE: This AC/DC Adapter is intended to be correctly orientated in a vertical or floor
mount position.
CONNECTING THE CONVERTER BOX TO YOUR TV WITH RF JACK
5. Set the connected TV to CH 3 to receive the TV signal from the unit. (Note: The default
RF output of the unit is Channel 3).
8
CONNECTING THE CONVERTER BOX TO YOUR TV WITH AV JACKS
1. Connect your existing antenna cable to the RF IN Jack of the converter box.
2. Connect the supplied RCA ( Video/Audio) cables from VIDEO/AUDIO jacks ( Yellow,
White, Red ) of the converter box to the Video/Audio jacks of the external Television.
3. Insert the small plug from supplied AC/DC Adapter into the DC In jack on the rear of the
unit.
4. Insert the supplied AC/DC Adapter to any wall outlet having AC 100-240V~, 50/60Hz.
NOTE: This AC/DC Adapter is intended to be correctly orientated in a vertical or floor
mount position.
To RF Jack on the rear of unit.
To DC In jack on the rear of unit.
To AC Wall Outlet
5. Set the input source of the connected TV to AV in.
From Antenna
From Antenna
CONNECTING THE CONVERTER BOX TO YOUR VCR
1. Connect your existing antenna cable to the RF IN Jack of the converter box.
2. Connect the supplied RF coaxial cable from the RF OUT Jack of the converter box to the
RF IN jack of the VCR.
3. Connect the other RF coaxial cable ( Not Included ) from the RF OUT jack of VCR to the
antenna jack of the external Television.
4. Insert the small plug from supplied AC/DC Adapter into the DC IN jack on the rear of the
unit.
5. Insert the supplied AC/DC Adapter to any wall outlet having AC 100-240V~, 50/60Hz.
NOTE: This AC/DC Adapter is intended to be correctly orientated in a vertical or floor
mount position.
To Antenna Jack on the TV.
From RF Out Jack on the VCR.
To RF In Jack on the VCR.
To the RF In Jack on the unit.
From RF Out of the unit.
To AC Wall Outlet
9
To DC In jack on the rear of unit.
6. Set the connected VCR to CH 3 to receive the TV signal from the unit. Set the connected
TV to the channel as the VCR out. (Note: The default RF output of the unit is channel 3).
SETTING IN FIRST TIME
When power on the unit in first time or after user reset, the follows picture will appear.
Follows the on screen instruction to set up the unit as follows:
8. Press the AUDIO button repeatedly to select the audio channel. (Function
depends on the Digital TV signals emit from TV station.)
9. Press the SIGNAL button to read the signal level of current station, press
again to turn it off.
10.Press the RETURN button to return to previous station.
11.Press the ASPECT button repeatedlytosetto4:3or16:9tomatchthe
aspect ratio of the connect TV and playing program.
12.Press the OSD (On Screen Display) button repeatedly to read (and turn off)
the information of current status.
13.Press the FAV (Favorite) button, the favorite list will appear on the screen.
Use the Direction and OK button to edit the list as desire. After edit, press
the FAV + or – button repeatedly to select the channel in the list.
14.Press the CC (Close Caption) button repeatedly to activate and set the CC
functions.
MENU
Press the MENU button, the setting menu will appear on the screen, use the
Direction, OK and EXIT buttons to set or reset the settings.
10
Press the Direction or button to select and highlight the function you need to set.
Press the Direction or button to set. When finished, press the OK button to confirm
the settings and exit.
1. OSD Language: To select and set the On Screen Display language.
2. Signal Type: To select and set the TV source to Air or Cable to match the TV system
you are.
3. When selected, press the Direction
to auto search and stored the available TV
stations.
BASIC OPERATION
1. Connected the unit to power and external devices as previous procedures.
2. Press the
(Power) button on the unit or remote control to power On/Off
the unit.
3. When power on the unit in first time or after user reset, set up the unit as
the section of “Setting in First Time Use” on page .
◄or ► button on the unit or CH
▲
or
▼
repeatedly to select the desired available channel. Or,
select and watching channel 32-2.
5. Press the V (Volume) + or – button on the remote control to set volume
level.
6. Press the EPG button to read the Electronic Program Guide. (Function
depends on the Digital TV signals emit from TV station.)
7. Press the Mute button to turn off the sound temporary, press again to turn it
back.
9
After setting,
4. Press the CH
remote control
on the
Press the numeric and "-" (Dash) buttons to select the desired available
channel directly. For example, press the buttons "3" + "2" + "-" + "2" to
(If you do not know the TV
system you are, please consult the TV signal
provider in your area).
Program:
If Program is selected, the follows screen will appear:
Picture:
If Picture is selected, the follows screen will appear:
Use the Direction, OK and EXIT buttons to set the aspect ratio to match the
aspect ratio of the connected TV and playing program.
11
1. If program Edit is selected, use the Direction and OK buttons to Move,
Skip, Lock, Delete or Rename the programs as the on screen instructions.
(Note: Password is needed to enter.The
default password is "000000").
2. If EPG is selected, the Electronic Program Guide will appear on the screen
Use the Numeric, Direction, OK and EXIT buttons to read and/or exit the
program guide.
Channel Search
If Picture is selected, the follows screen will appear:
1. If Auto Search is selected, press the Direction ► buttontoautosearchand
stored the available TV stations.
2. If Manual Search is selected, use the Direction and OK buttons to search
and stored the available station one b y one as the on screen instructions
manually.
3. If Signal Type is selected, press the Direction ► button repeatedly to set to
Air or Cable to match the TV system you are. (If you do not know the TV
4. If RF Output Channel is selected, press the Direction ► button repeatedly to
TIME
If Time is selected, the follows screen will appear:
12
system you are, please consult the TV signal provider in your area).
set the RF output channel from the unit to CH 3 or 4. (After settings, make
your TV is incorrect).
sure your connected TV or VCR is in the same channel. Otherwise, the
picture on
1. If Country Region is selected, use the Direction and OK button to select and
set the region you are.
2. If Sleep is selected, use the Direction and OK button to activate and set the
sleep timer as desire. After settings, the TV will turn off as the sleep timer
settings. To power on again, press the (Power) button.
3. If Power On/Off is selected, use the Direction and OK button to activate and
set the auto power ON or auto power OFF timer as the on screen
instructions.
► button repeatedly to
OPTION
If Option is selected, the follows screen will appear:
1. If OSD Lan
g
uage is selected, press the Direction ►button repeatedly to
select and set the language of On Screen Display.
2. If Audio Language is selected, press the Direction ►button repeatedly to
select and set the first priority of available a udio language of current TV
program. (Function depends on the signal emit from TV station).
13
4. If Daylight Time is selected, press the Direction
turn it on or off to match the summer time your area is.
SYSTEM
If System is selected, the follows screen will appear:
1. If Parental Guidance is selected, use the Direction and OK button to select
and set the rating level as on screen instructions. (Password is needed to
enter; the default password is “000000”).
2. If Set Password is selected, use the Direction and OK button to r eset the
password as on screen instructions.
14
NEW pass word then keepit i safety place.)
(After setting, write down your
n
3. If Restore Factory Default is selected, reset all settings to factory default
password, favorite list will be reset.
4. If information is selected, press the Direction button to read information
of the unit. Press the EXIT button to exit.
settings as on screen instructions. After reset, all the stored stations,
15
~
~
~
~
~
~
~
~
~
~
~
(The default setting of the RF Output is CH3).
Make sure you have correctly selected the audio settings.
~ If no TV signal received over half hour, the TV will turn off automatically to
saving energy. Press the (Power) button to turn it on again.
the setting menu to turn it off.
~ Auto Power off timer was set, Press the (Power) button to turn it on. Or,
enter to
1 x User's Manual
1 x Remote Control
2 x AAA size batteries for remote control
1 x AC/DC Adaptor
x RF Cable
ACCESSORIES
16
Power Source:
DC 5V, 2A
RF Freq. Range: 57MHz-803MHz
RF Channel Range: CH1-CH135
GENERAL SPECIFICATIONS
Input: ATSC and NTSC
1
x AV Connection Cable in RCA type
1
( Input: AC 100-240V~, 50/60 Hz; Ouput: DC 5V, 2A )
Size: 148.5(W) x 210(H)mm (A5)
Craig warrants this product to be free from manufacturing defects in material and
workmanship under normal use for a period of 90 days from date of purchase. If service
is required, please return the product to the store where it was purchased for exchange;
or, pack the unit in the original packing material with all accessories if applicable, a copy
of your sales receipt and a Cashier’s check or Money Order for $15.00 (to cover shipping
and handling costs) payable to Craig Electronics Inc. For consumers in Canada, please
make sure that the cashier check or money order is redeemable through a U.S. bank.
Ship your product freight pre-paid. Your unit will be repaired, replaced or if the unit can
not be repaired or replaced, a refund will be forwarded to you within four weeks of receipt
of your unit. Please ship your unit to:
Craig Electronics Inc.
1160 NW 163 Drive
Miami, Fl 33169
This warranty is void if the product has been: a) Used in a commercial application or
rental. b) Damaged through misuse, negligence, or abuse. c) Modified or repaired by
anyone other than an authorized Craig service center. d) Damaged because it is
improperly connected to any other equipment.
Note: This warranty does not cover: a) Ordinary adjustments as outlined in the Owner’s
Manual which can be performed by the customer. b) Damage to equipment not properly
connected to the product. c) Any cost incurred in shipping the product for repair. d)
Damage to the product not used in the USA.
This warranty is not transferable and only applies to the original purchase. Any implied
warranties, including the warranty of merchantability, are limited in duration to the period
of this expressed warranty and no warranty whether expressed or implied shall apply to
the product thereafter.
Under no circumstance shall Craig be liable for any loss or consequential damage arising
out of the use of this product. This warranty gives specific legal rights. However, you may
have other rights which may vary from state to state. Some states do not allow limitations
on implied warranties or exclusion of consequential damage. Therefore, these
restrictions may not apply to you.
To Obtain Service on your Product
email:[email protected]
Printed in China CVD601-IB-E0CR1-E0US
LIMITED WARRANTY
Craig warrants this product to be free from manufacturing defects in material and
workmanship under normal use for a period of 90 days from date of purchase. If service
is required, please return the product to the store where it was purchased for exchange;
or, pack the unit in the original packing material with all accessories if applicable, a copy
of your sales receipt and a Cashier’s check or Money Order for $12.00 (to cover shipping
and handling costs) payable to Craig Electronics Inc. For consumers in Canada, please
make sure that the cashier check or money order is redeemable through a U.S. bank.
Ship your product freight pre-paid. Your unit will be repaired, replaced or if the unit can
not be repaired or replaced, a refund will be forwarded to you within four weeks of receipt
of your unit. Please ship your unit to:
Craig Electronics Inc.
1160 NW 163 Drive
Miami, Fl 33169
This warranty is void if the product has been: a) Used in a commercial application or
rental. b) Damaged through misuse, negligence, or abuse. c) Modified or repaired by
anyone other than an authorized Craig service center. d) Damaged because it is
improperly connected to any other equipment.
Note: This warranty does not cover: a) Ordinary adjustments as outlined in the Owner’s
Manual which can be performed by the customer. b) Damage to equipment not properly
connected to the product. c) Any cost incurred in shipping the product for repair. d)
Damage to the product not used in the USA.
This warranty is not transferable and only applies to the original purchase. Any implied
warranties, including the warranty of merchantability, are limited in duration to the period
of this expressed warranty and no warranty whether expressed or implied shall apply to
the product thereafter.
Under no circumstance shall Craig be liable for any loss or consequential damage arising
out of the use of this product. This warranty gives specific legal rights. However, you may
have other rights which may vary from state to state. Some states do not allow limitations
on implied warranties or exclusion of consequential damage. Therefore, these
restrictions may not apply to you.
To Obtain Service on your Product
email:[email protected]
Printed in China CVD508_WC_E0CL1_H0US
LIMITED WARRANTY
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
Craig CVD508 helps you receive and watch digital and analog TV content on your existing TV. You can connect the device to your TV using either RF or AV cables, and to your VCR for recording. It comes with a remote control for easy operation, and you can set favorite channels for quick access. The device also includes features such as an electronic program guide, closed captioning, and parental controls, ensuring a convenient and enjoyable TV viewing experience.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Emprex HD-3701 User manual
-
-
Zenith Z56DC1D - 56" DLP HDTV User manual
-
ViewSonic VS12676-1M User manual
-
Sanyo LCD-26XR9DA User manual
-
Haier HLH266BB Owner's manual
-
-
Maxent ML-3251HLT Owner's manual
-
Westinghouse TX-42F970Z User manual
-
Toshiba 20DL76 User manual