Qazqa Circles User manual

  • Hello! I'm your chat assistant, and I've reviewed the user manual for the Circles WL 77 Copper wall light. This document explains how to install the light and includes important information about the type of lamp to use, the cable size and wiring symbols. It also mentions that the device can be dimmed by wall switch. I'm here to help you with any questions you may have about your new light.
  • How long should I wait for a halogen lamp to cool before replacing it?
    What do the wire symbols N, =, and L represent?
    What type of lamp should be used with this luminaire?
Circles WL 77 Copper
106556
OFF
STEP 1
STEP 4
77 CM
E27 Max.25W
20
10 CM
10 CM
3X
20
I
8mm
Strip the wire to the indicated length (mm) ;different items require different length
When replacing a halogen lamp, wait for it to cool, for a minimum of 5 minutes.
Take note of the symbols when connecting wires:
=Neutral =Live =Earth
11.
12. Meaning of symbols:
Connect using the spaciļ€ed cable; different items require different cable
The luminaire can be dimmed by wall switch
Only the self-shielded halogen lamp should be used with the luminaire
3x
min.0.75mm2
NL
/