2. Avteq
  3. RPS-500S-BASIC

Avteq RPS-500S-BASIC Installation guide

  • Hello! I have reviewed the AVTEQ RPS 500 Setup Guide. This guide provides a step-by-step assembly process for the display cart, including instructions for attaching casters, braces, and mounting the screen support and acrylic platform. I'm ready to answer your questions about the assembly or included components.
  • What is included with the display cart?
    Where should the casters with brakes be installed?
    What are lacing bars for?
    Where can I find screen mounting instructions?
    What tools are included?
RPS 500
Items Included
A
B C DE
F G HI
JKLMN
U
P R S
QT
O
A
F
1
2
A
K
L
C
C
Support
x 2
Union
x 2 Screen mount
x 1
Shelf
x 1
Lacing bars
x 2
Camera
support
x 1
Acrylic platform
x 1
With break x 2
Without break x 2
Philips flat
headx 4
5/16"
ext 0.75"
x 16
Philips
Head Bolt
5/16”x 1” or
5/16"x 3/4"(x12) Bolt 10-32 (x4)
blind nut
1/4” (x 4)
Multi Wrench x1
5/16"
ext 1"
x 4
1/4” (x8)
1/4” (x4)
Philips Head
Bolt 1/4”x
3/4” (x8)
5/16” (x4)
Attach casters(F) to
body (A).
Note: Casters with
brakes should be
assembled on front.
Slide horizontal braces
(C) to each of the
uprights (A)
S
Multi Wrench
¹
Philips Head Bolt
5/16”x 1 1/4" (x4)
3
4
56
A
K
L
A
K
L
I
A
S
U
D
O
K
Attach the braces (C)
to the uprights (A)
Bolt the lacing
bars to the back
of the horizontal
braces.
Bolt shelf on
to shelf rack.
↑
7
89
A
DBRP
Q
B
H
R
H
GJ
N
D
Attach screen support
(D) to body (A).
NOTE: See instructions
inside screen support
box to mount flat screen
on cart. Please secure
the flat screen to the
cart at desired height
before moving on to
step 7.
Attach acrylic (G) to
bracket (H) then attach
bracket (H) to body (A)
at desired height.
Rivet nut
/