LFB-D Series

superbrightleds com LFB-D Series User manual

  • Hello! I've reviewed the user manual for the superbrightleds LFB-D series LFB-D02 LED ready deck light. This manual provides important safety instructions and details for installation, including using G4 bulbs and outdoor usage. I'm ready to answer any questions you have about this product based on the document.
  • Can this light be used in a pool or spa?
    What type of bulbs does this light use?
    Do I need to use a sealant during the installation?
LED Ready Deck Lights
User Manual
Important: Read all instructions prior to installation. LFB-D series
4400 Earth City Expy, St. Louis, MO 63045 866-590-3533 superbrightleds.com
Rev Date: V1 04/05/2022
Safety and Notes
This product should be installed and serviced in accordance with
applicable national, state, and local building and electrical codes.
For use with OUTDOOR, low-voltage landscape lighting systems
ONLY.
NOT FOR USE with submersible or pool/spa equipment.
Do not submerge in water, the product can be damaged.
For low voltage use only. Power supply voltage must match
installed bulb.
These lights are designed for G4 bulbs (up to 20 W), which
are not included.
1. Remove front light cover.
2. Mark and drill holes in mounting surface.
3. With supply power o, make electrical connection.
4. Mount light housing, using additional weatherproof sealant on
rear as needed.
5. Install compatible bulb.
6. Reinstall front light cover.
Dimensional Drawings
LFB-D02
/