Lightolier IS:40620 User manual

Brand: Lightolier

Model: IS:40620

Type: User manual

Lightolier IS:40620 is a versatile lighting fixture suitable for both incandescent and compact fluorescent bulbs. Its adjustable design allows for a variety of mounting options, including backplate installation and diffuser installation. The fixture is easy to install, with clear instructions provided in the manual. It is important to note the safety precautions outlined in the manual, such as turning off electricity at the fuse box before proceeding with installation. The fixture is designed to meet electrical codes and regulations, ensuring safe and compliant operation.

flEADANDUNDEINTANDTHESEINSTRUCTIONSBEFOREINSTALLINGFfXTURE

INSTRUCTIONSHE~ NO.

fkture is intended for installation in accordwwa with tie National Elmtrical codeendl~l raguletions.

Iassure full compliance with Ikcal codes and regulations, chsck with your lad elecEiwl inspector before

stallation. To prevent electrical shock, turn off elactricitf at fuse box befora procaading.

IS:40620

Main Uresoinatruationsformaintaoaocarafaraoca.

R0194

PaOa1 of 2

INSTRUCTIONS FOR INSTAUATION OF A.D.A. LUNA

COVERSFIXTURES40S20,4DGZDN1.4W20H2

NOTE

This instructionsheetcoversbothcompsctfluorescentandincandescenttypefirrturas.Altheughillustrationshews

compactfluoraacantvaraion,tha iocandaacantvaraionaaaamblessndinatallathaaamo.

3ACKP3ATE INSTALLATION:

Thread MOUNTING SCREWS into back of MOUNTING PLATEso MOUNTING SCREW HEAOStighten into recessed araa of MOUNTING PLATE(Fig. 1).

( Using the appropriate slots in MOUNTING PLATE,secura MOUNTING PIATE to OUTLETBOX using 011TL!3 BOX SCREWS (provided with

OUTLET BOX).

1. While supporting BACKPL4TE make contractions black fixture lead or fixtura without tracer marks to Rot(black) supply lead white fisture lead or

fisture lead with trecar marks to neutral (white) supply lead. Uninsulated fixtwa wire is a ground wira add must be connested to grounding terminal

or ground lead inside OUTLET BOX. Use WIRE NUTS (local hardwara item). Push supply wires and wirEmut connections back into OUTLET BOX.

L Position BACKPL4TE over MOUNTING PIATE allowing MOUNTING SCREWS to come through tha holq in BACKPLATE.

CAUTION Make certain wires are net pinchad batwaao parta.

j. SecureBACKPIATEinpositionbyinstallingthe‘@.voBATTERYNUTSoverMOUNTINGSCREWSandtighten.

i. Installrecommendedlamp.

ForCom act Fluoraacant Unite.

WARN~NG-(RISK OF FIRE) MOST DWELLINGSBUILTBEF~RE1BB5HAVESUPPLYWIRE RATEDSW C.CONSULTA

QUALIFIEDELECTRICIANBEFOREINSTALLATION.

NOTE If supplywiras are locatedwithinthraeinchesofballaaf,uaewire ratadforat IeaetW C.

CAUTION

MAXIMUM WAllAGE AS MARKEDON FIXTUREMUST NOT BEEXCEEDEO.

v’-’-’-

THUMBSCREW

BATTERYNUT

WTNUCTION SHE~ NO.

1S:40620

INSTRUCTIONS FOR INSTALLATION OF A.DJl LUNA (Continued)

COVERSFIXTURES4fM20,40B20N1,4W20H2

Iolw

Page2 Ofz

)IFFUSER lNSTALLhON

Position DIFFUSERso that recessed area of DIFFUSERLIPhooks war DIFFUSERCAT12Hon BACKPLATE (Fig. 2).

Swing DIFFUSERback againat SACKPlATE and sacure DIFFUSERin position by threading THUMB SCREW, into hole in the top

of BACKPIATE (Fig. 3).

CAUTION: Make certain that THUMB SCREWtightens into tha raceasad sres of the DIFFUSERLIP(Fig.3).Do not over

tightanTHUMBSGREW.DIFFUSEifdamagacouldoccur.

/’--

THUMBSCREW

c rTHuMBscRw

HG.9

..—

Lightolier IS:40620 User manual

Lightolier IS:40620 User manual

Lightolier IS:40620 User manual

Related papers

Other documents