Lightolier IS:40616 User manual

Brand: Lightolier

Model: IS:40616

Type: User manual

READANDUNDERSTANDTHESEINSTRUCTIONSBEFOREINSTALLINGFIXTUFIE INSTRUCTIONSHEE

ISfwra is intesdedforinstallationin acznrdance with tha National Electrical Code and Ictal regulations.

assura full compliance witi local ccdas and regulations, thack with your Id electrical inspactor before

tallation. Toprevent elmtricel shcck, turn off elwtrici~ at fuw box bafora proceeding.

IS:40616

Retaintheseirretrarctimraformaintenancereference.

R0194

Page 10

INSTRUCTIONS FOR INSTALLATION OF A.D.A. TRIO FIXTURES.

COVERSFIXTURES4tM16WH,4(K16WHE1,40616WHE2,4W16WHN1, 40616WHH1,40616WHN2,

40616sB,4W16SBE1,40616SBE2,40616SBN1,4LW16SBH1,40616sBN2,

40616SC,40616SCEl,40616SCE2,40616SCN1,40B16SCH1AND 40616SCN2

NOTE Thisinstructionsheetcoversbothcompactfluorescentandincandescenttypafirrturea.Althoughilhretrati(

showscompactfhaorescantversion,the incandescentversionassamblesandinstallsthasama.

IACKPIATE INSTALLATION:

1. Loosan two MOUNTING SCREWS in LOWER MOUNTING BRACKFE and ramove OIFFUSER ASSEMBLY by pulling OIFFUSER ASSE

from LOWER MOUNTING BRACKETS and unhooking ASSEMBLY from two UPPER MOUNTING BRACKETS (Fig. 1, Fig. 2 and Fig. 3).

2. Thraad CROSSBAR MOUNTING SCREWS into CROSSBAR as shown in Fig. 1.

3. Using appropriate slots in CROSSBAR, sacure CROSSBAR to OUTLETBOX using OUTLET BOX SCREWS (providad with OUTLET60)

4. While supporting BACKPLATEmaka connations black fisture laad or fixtura Iaed without trmar marks to hot (black) supply Iaad; v

lead or fisture lead with tracar marks to nautral (white) supply Iced. Uninsulated fklura wire is a ground wire and must be connect,

grounding tarminal or connections back into OUTLET BOX.

5. Position BACKPU+TE over CROSSBAR allowing CROSSBAR MOUNTING SCREWS to coma through holas in BACKPLATE.

CAUTION:Make certain wires ara not pinched between parts.

6. SacureBACKPL4TEbyinstallingtwoBA~ERYNUTSoverCROSSBARMOUNTINGSCREWSandtighten.

7. Installracommendadlamp(s).

CAUTION MAXIMUM WAITAGE AS MAFIKEDONFIXTUREMUST NOTBEEXCEEOEO.

1-1

C3HTC>LIEl?’:::+’:~f~

—

NSTRUCTIONStlE~ NO.

1S:40616

INSTRUCTIONS FOR INSTALLATION OF A.D.A. TRIO FIXTURES.

COVERSFIXTURES40616WH,4M16WHE1, 4&16WHE2, 4tNi16WHNl, 4W16WHHI,

AW16WHN2,4061.6SB,40616SBE1,.40616SBE2,4LM16SBN1,40616SBH1,41W16SBN2,

lM6t

Page2012

4iW16SC,~6SGEl, 60616SCEZ4W16SCN1,4Mi16SCHl ANO 4M16SCM

)

)IFFUSERINSTAU.ATION

1. HookDIFFUSIR ASSEMG4Yover UPPER.MOUNTINGBRACKETSallowing UPPERMOUNTING SCREWSto go down into holes in UPPERMOUNTING

WIACKETS,swing OIFFUSERASSEMBLYagainst EACKFLATE(Fig.2).

2. SecureOIFFUSERASSEMBLYin positionbytighteningtwo LOWERMOUNTING SCREWSinto LOWERMOUNTING BRACKETS(Fig.3).

wvMOuNT’NG

~ UFPERMOUNTING

iihACKET

DIFFUSERASSEMBLY

LOWERMOUNTING

SCREW

- LOWERMOUNTING

BRAcKH

= GACKFIATE

M.2

FIG.3

●

Lightolier IS:40616 User manual

Lightolier IS:40616 User manual

Lightolier IS:40616 User manual

Related papers

Other documents