TV Ears TV Listening Device User manual

You will need your new battery faceplate, your headset, and a small Phillips screw driver.

Step 1 Step 2

Remove the two screws located on the Turn the headset over and remove the face-

back of the headset. plate with the logo and batteries attached.

Step 3 Step 4

Screw the new faceplate on the headset Make sure the headset is turned off. Place the

headset on the transmitter (charger) and allow

your TV Ears to charge for 8 hours.

TV Ears Inc. 2810 Via Orange Way Suite ‘A’ Spring Valley CA 91978

Phone: (888) 883-3277 Fax: (888) 958-7899

www.tvears.com